• 🇳🇿 🇲🇲 🇯🇵 🇨🇳 🇦🇺 🇦🇶 🇮🇳
    Australian & Asian
    Drug Discussion


    Welcome Guest!
    Posting Rules Bluelight Rules
  • AADD Moderators: andyturbo

Synthetic Cannabinoids Thread

There are two possibilities here, aya. Either you do know what you're talking about, and could offer some good HR advice, but prefer to make some snide insults and slink off with a smug sense of self-satisfaction, or you don't know what you're talking about, and have tried to cover up that shortcoming with some vague allusions to being an authority and some ad hominem remarks. Whichever is the case, it's not a very classy move.
 
^That and that alone is the reason for their popularity in my area. There is several large mines around my town so plenty of people are keen to smoke under the radar of drug testing. People substitute them for cannabis which is a big problem. This stuff is far more dangerous, expensive and nowhere near as recreational as THC.
 
ah thanks for clearing that up belarki.

so are all synth C's in a grey area or are there some which are legal.

would chems such as JTE-907 and URB597 be in the grey area?

regards
AFA
 
hyrolla... I'll PM you soon. Dramas luv.

I also agree with your post. The only thing synth herbal smoke shit is good for, is if you need to do piss tests (or whatever) and need a negative.

Smod - Trust me, I get NO satisfaction at all from talking a little nasty online, it's called being a little TOO direct. I am sorry if it caused you offence, none was intended. But come on, you were being a bit of a smart ass.

AFA - JTE-907 is around 25 times WEAKER than JWH018, so it wouldn not even be worth it. You could probably smoke the same amount of magnesium and get high hahahahah (jokes), but it is really weak. The URB597 is indeed a good chemical, a sisters cousin (lol) of the am series, not bad, much weaker than AM2201, so I am guessing thats why we (who smoke this crap, including me on the off occasion), pay through the asssss for it. But yes, both are grey area drugs.
 
AyahuascaSeeker13 is somewhat correct concerning the acetone. It's boiling point is around 50C from memory, so a gentle heating should do the trick to get rid of it all. I've had to use acetone multiple times for various reasons, and I never let it just evaporate at room temp.
 
^ THANK YOU! I should have made my point a little clearer... a room evaporation will NOT remove all the acetone...

By the way, just because i'm stumbling round online tonight on MXE and Etizolam and finding the most weirdest things ever who trhe FUCK calls their product "The Natural" that site selling that fuckin shit is a joke and half, iu love all the spelling errors and I bet you he isn't even high, just a dumb ass kid mixing shit together he knows nothing about. SHAME
 
^ Fuckin LOL

Have a sook... hahahaha someone sounds jealous (me included). You may as well whinge to every major company, because anything that intoxicates you that you buy, was man made, including smokes, weed dealers, alcohol shops etc... This can all be made at home... So chill. I loathe these cunts as much as the next bloke, but you can't hate on people who are hustlin hard doin there thing? True?

Haha a sook? Jelous? Jelous of what? The fact like people such as yourself are getting ripped right fuckin off by these cunts 8)

FYI, I'm a very self sufficient person ;) if I chose to consume this shit, I would do what I suggested..

I wouldn't 'hate' on these muthuckers if there gross profit %% was300% LESS... But it isn't....
 
I would be a bit more concerned (correct me if I'm mistaken) about contaminants in the Acetone from the manufacturing process, unless it's expressly food grade.

For example, they use benzene to distill ethanol beyond its azeotropic point with water at 95%. But I don't know if this is a concern with Acetone.
 
AyahuascaSeeker13 is somewhat correct concerning the acetone. It's boiling point is around 50C from memory
a room evaporation will NOT remove all the acetone...
Perhaps I'm missing something, but water will evaporate completely at room temperature, why would acetone not? Boiling /= evaporation. I know from experience that acetone evaporates completely at room temperature. It's even cold to the touch.
But come on, you were being a bit of a smart ass.
Well, you did insinuate i was an idiot and make a silly mistake in the same post, what did you expect? Anyway, water under the bridge, let's kiss and make up.
I am sorry if it caused you offence, none was intended.
None was taken, I'm thick-skinned.

(btw I was posting as SMod yesterday because this account was haywire).

Another point... what do you think the makers of the commercial blends are using as a solvent? I imagine they're probably using acetone too...
 
Last edited:
^ I would ASSUME vendors who make this shit, use anything they can find, be it acetone, or actual nail polish remover (with all the additives in it)... Who knows, it's a risk every time you blaze.

Also, glad we are friends again ahahahahahahahaha
 
I would be a bit more concerned (correct me if I'm mistaken) about contaminants in the Acetone from the manufacturing process, unless it's expressly food grade.

For example, they use benzene to distill ethanol beyond its azeotropic point with water at 95%. But I don't know if this is a concern with Acetone.

It is VERY hard to find 100% PURE acetone in Australia. Unless you run a lab, I can pretty much promise you that what you buy would be 98% acetone, and the remainder would be contaminants of all kind. It's used for stripping paints, oils etc... Not to dissolve RCs (after all)... I would think Ethanol to be safer. I don't know... Unless you make your own (alcohol), you can't guarantee what's in your smoking blend.

Buy a still, learn to make pure alcohol, and that way you know what you'd be smoking.
 
It is VERY hard to find 100% PURE acetone in Australia. Unless you run a lab, I can pretty much promise you that what you buy would be 98% acetone, and the remainder would be contaminants of all kind. It's used for stripping paints, oils etc... Not to dissolve RCs (after all)... I would think Ethanol to be safer. I don't know... Unless you make your own (alcohol), you can't guarantee what's in your smoking blend.

Buy a still, learn to make pure alcohol, and that way you know what you'd be smoking.

It is slightly soluble in water, more soluble in Ethanol, and highly soluble in Acetone. The safest bet would be as you said, distilling your own alcohol. Realistically you won't really get the distillate past ~92% Ethanol though.

Still, I think it's preferable to use more solvent than to have potentially toxic impurities in the product.
 
By the way, just because i'm stumbling round online tonight on MXE and Etizolam and finding the most weirdest things ever who trhe FUCK calls their product "The Natural" that site selling that fuckin shit is a joke and half, iu love all the spelling errors and I bet you he isn't even high, just a dumb ass kid mixing shit together he knows nothing about. SHAME

Haha. What is your complaint with Simon? He has been around for years and is mostly harmless. The funny one was Nolan. We got some good mileage out of him here.
 
Hahahahahah Simon is a fucking classic! I have emailed him a few times, and his replies are strange (to say the least). The spelling, the products, his SITE hahaha, he is a tripper. He must make enough to live so good the fuck on him! That Nolan cunt I only heard about, he went MIA as far as I know (fill me in bro). This Gary at the new Aussie one seems legit, and a half decent biz man IMO. I don't know who else has dealt with him, but the shit he gets is top stuff (again IMO).
 
butane is best for making extract. imo synthetics cannabioids are most harmful kind of drugs anyone can try
 
I would be a bit more concerned (correct me if I'm mistaken) about contaminants in the Acetone from the manufacturing process, unless it's expressly food grade.

For example, they use benzene to distill ethanol beyond its azeotropic point with water at 95%. But I don't know if this is a concern with Acetone.

I can get pharmaceutical grade acetone, but once you open it there is always the concern it's not going to be anhydrous.

Acetone does not form an azeotrope with water, using baked MgSO4 as has been posted all over this site will be sufficient for producing anhydrous acetone.
 
[NZ] Synthetic cannabis products banned

[NZ] Synthetic cannabis products banned

The Government has announced that three new synthetic cannabis products will be banned after they recently appeared on the market.

Associate Health Minister Peter Dunne confirmed the ban in a media conference held at Parliament this afternoon.

The new synthetic cannabis products appeared less than three months after the so-called "legal highs" were banned.

Auckland-based Enjoi Products released a repackaged and modified version of its Amsterdam Cafe synthetic cannabis product to convenience stores across Auckland on Saturday.

The Long Island Tea blend has been slightly chemically altered from the company's former Havana Special product, which was affected by the Government ban that came into force in August.​

SCCZEN_A_031011NZHRGDOPE04_460x230.JPG


here
 
Top