• 🇳🇿 🇲🇲 🇯🇵 🇨🇳 🇦🇺 🇦🇶 🇮🇳
    Australian & Asian
    Drug Discussion


    Welcome Guest!
    Posting Rules Bluelight Rules
  • AADD Moderators: andyturbo

Mushroom Season 2011

Status
Not open for further replies.
and thats what iv geen dong, a pin in the top to hold the cap, snip the cap off, putting it on foil [better for making syringes], a drop of water on the top and leaving it, but i just dont get anything when i got for a look the next day.
ill try paper next time.
 
OK, with a bit of self-reflection and meditating, I am going to just attempt to find these on my own.

I've realised that if I really need to, or arent having success, I can just revert to DMT and focus that way.

I will still hang around, hope you all don't mind, and post my finds,if any, and still be an active member of this community, but I am dropping the persistence, completely.

I truly believe in the other things I have said. I'm not religious or was a believer of end of world theories BUT you just need to open your eyes and realise how different Mother Earth is to know something is wrong. Please take my warnings seriously. As an Adelaidean, and just another everyday South Aussie this shit was mindblowing. I have a loving partner and 3 beautiful children and I have as much to lose as anyone else...Please, just keep it in the back of your mind, and try to change your lifestyle so you are living in the light and love, even small changes make a difference. You'll see it in the sky late August/Early Sept...and be aware of the Sept 25-26-27th date. And when the media tells you something, or the government tells you something, look within yourself ask whether it's the truth. It's all I ask.

Peace and love to all.
 
and thats what iv geen dong, a pin in the top to hold the cap, snip the cap off, putting it on foil [better for making syringes], a drop of water on the top and leaving it, but i just dont get anything when i got for a look the next day.
ill try paper next time.

It worked the first time for me,

Let me break it down: break the stem off completely sit it (the cap) GILLS DOWN on a white piece of paper, (maybe add a drop of water ontop of the cap) then cover with a cup for half hour to an hour...

I would be more than happy to perform this step for you haha
 
enough of this commet shit lol

yagecero, their not from WA are they?

Totally, and no mate, suburban Melb. I just checked the weather for down south WA - if you can't find any by mid-next week, I'd be seriously surprised. Psilo seems to know about the entire country somehow, so maybe wait for confirmation from him - but yeah, looking good.

Good luck.
 
Psilo seems to know about the entire country somehow

I have been hunting for almost 10 years and in this time I have studied the weather conditions/habitats in which psilocybes thrive. I have also made friends with hunters from across the country. This is why I usually know when certain parts of the country are fruiting, when others are not.

Don't be surprised if W.A is still another month or so off ;)
 
Don't be surprised if W.A is still another month or so off ;)

I thought you'd chime in with your omniscient mushroom powers ;)

10 years you say? hmmmm, I'm wondering if we would've bumped into each other over the years.

I've only extensively picked around Vic - EVERYWHERE, and in Colombia for cubensis.

But you sir, will turn me into a national shroomer ;)
 
Last edited:
Just a thought about the spore printing, are you using juvenile mushies, as in the gills are not yet covered with the purple buggers you seek to harvest. Probably a silly comment, probs already know that.

Has anyone found suburban woodchip patches of subbies in Adelaide? Also does anyone know the best type of woodchips for such a patch?
 
Last edited:
Just a thought about the spore printing, are you using juvenile mushies, as in the gills are not yet covered with the purple buggers you seek to harvest. Probably a silly comment, probs already know that.

Has anyone found suburban woodchip patches of subbies in Adelaide? Also does anyone know the best type of woodchips for such a patch?


He said he put a pin in the cap. The method i was taught did not require this maybe thats why?? Just a stab in the dark but you never know...
 
and thats what iv geen dong, a pin in the top to hold the cap, snip the cap off, putting it on foil [better for making syringes], a drop of water on the top and leaving it, but i just dont get anything when i got for a look the next day.
ill try paper next time.

Ill explain a lot more sterile procedure. Wash ur hands with sum sanitizer. Use an alcohol swab to wipe a razor but be careful as u can cut ur finger easily. Cut the stem as close as u can to the cap without touching it whilst u insert a pin or needle that has been wiped down with swabs.

Before doing all this wipe down sum aluminium foil with the swabs and gently/slowly place the caps on the foil. Cover it with a CLEAN plastic cup and place a unused alcohol swab that has been folded into 4 under the cup so there is a tiny bit of air flow. Leave for atleast 24 hours if not sure check the cap by lifting it up very gently and slowly. Its usually best to keep these caps on foil in a glovebox when printing. Once down fold up and place in sterile bags. Ull need one anyway for the next step:)
 
Ill explain a lot more sterile procedure. Wash ur hands with sum sanitizer. Use an alcohol swab to wipe a razor but be careful as u can cut ur finger easily. Cut the stem as close as u can to the cap without touching it whilst u insert a pin or needle that has been wiped down with swabs.

Before doing all this wipe down sum aluminium foil with the swabs and gently/slowly place the caps on the foil. Cover it with a CLEAN plastic cup and place a unused alcohol swab that has been folded into 4 under the cup so there is a tiny bit of air flow. Leave for atleast 24 hours if not sure check the cap by lifting it up very gently and slowly. Its usually best to keep these caps on foil in a glovebox when printing. Once down fold up and place in sterile bags. Ull need one anyway for the next step:)


You are very enthusiastic about it, I envy you.
 
thats similar to what iv been doing sus', as clean as i can, alcohol swabbed everything. maybe the caps iv tried are too young?
 
Ill explain a lot more sterile procedure. Wash ur hands with sum sanitizer. Use an alcohol swab to wipe a razor but be careful as u can cut ur finger easily. Cut the stem as close as u can to the cap without touching it whilst u insert a pin or needle that has been wiped down with swabs.

Before doing all this wipe down sum aluminium foil with the swabs and gently/slowly place the caps on the foil. Cover it with a CLEAN plastic cup and place a unused alcohol swab that has been folded into 4 under the cup so there is a tiny bit of air flow. Leave for atleast 24 hours if not sure check the cap by lifting it up very gently and slowly. Its usually best to keep these caps on foil in a glovebox when printing. Once down fold up and place in sterile bags. Ull need one anyway for the next step:)

Excellent description, I normally use a coin under the side of the cup, but your method is cleaner. From there I make a spore suspension (spores and sterilised distilled water), which I let hydrate for 24 hours. After which I suck it all up into a syringe, which can be stored or used for inoculation straight away.
 
are spore prints legal in australia? from everything iv read, they are, but id like to hear some arguements againts, or see a document to state otherwise.
 
are spore prints legal in australia? from everything iv read, they are, but id like to hear some arguements againts, or see a document to state otherwise.

From my research: Spore prints are aslong as your using them for micropsy/research purposes. You would probably want to get it sent from within Australia though.

Spore syringe: Im not so sure about, the print is a lot easier anyway and you can make a syringe from a spore print.
 
From my research: Spore prints are aslong as your using them for micropsy/research purposes. You would probably want to get it sent from within Australia though.

Spore syringe: Im not so sure about, the print is a lot easier anyway and you can make a syringe from a spore print.

As far as I know if you order spore prints for microscopy purpose they are perfectly legal. Whether this means they have to be on glass slides or whether any print is ok I'm not sure.

Spore syringes on the other hand are intended for growing mushrooms and therefore illegal.

Buying a syringe removes one step in the growing process and is therefore easier than starting from a print.

I wouldn't risk my hard earned money by importing a syringe. Get a print.
 
Gah checked my two patches and theres nothing :( Only non-actives, this time last year they were blooming as well! Is it possible for a flood to damage the patches?

Sorry for going a bit off topic on the discussion
 
flood ah, hmm, if it was submerged for an extended period of time, I'd say that it would definately affect the mycelium, but if only for a short while, I would have thought it would do it good. Wouldn't mind hearing more about this?????

I'm fairly certain any spore print legal from anywhere to here and anything else, eg. syringe, live culture, is illegal as mentioned.
 
flood ah, hmm, if it was submerged for an extended period of time, I'd say that it would definately affect the mycelium, but if only for a short while, I would have thought it would do it good. Wouldn't mind hearing more about this?????

Hmm, thats what i would of thought too. The weather during the last 12 months has been all of the place so its the only explanation that i have. Time to do some research on it :)
 
Totally, and no mate, suburban Melb. I just checked the weather for down south WA - if you can't find any by mid-next week, I'd be seriously surprised. Psilo seems to know about the entire country somehow, so maybe wait for confirmation from him - but yeah, looking good.

Good luck.

its funny you mentioned that coz me n a mate were gonna go down south for a surf trip next weekend %) so might be worth havin a quick look..

I know WA season doesnt usually start till July but we have had some heavy rains recently and its startin to get freezing in the mornings/at night.. if the rain persists, might have to check out a certain pine forest next weekend 8)
 
Status
Not open for further replies.
Top