I have type one bipolar. If I stay up fpr
More than 48 hours I have a manic episode. Won’t sleep for 4-7 days.
Having come down meds help. I am prescribed clonazepam(klonopin) 2mg with my seroquel. The clonazepam and the full dose of seroquel (800mg) puts me out no matter how much I’ve snorted.
I have to stick to my snuff bullet. Probably around 30mg bump per sniff. 1-2 of those are good enough for me to go all day. I still eat, drink water, rest when need too.
Learning how to remove cuts by anhydrous acetone washing. Then. Dissolving the meth in a methylated alcohol. The yellow bottle of HEET fuel treatment is100% methanol. Whatever you do. DO NOT ISE THE RED BOTTLE OF ISO HEET. It has an injection cleaner mixed in. It will ruin your shit. Makes it look nasty like freebase and it’s got an oil in it.
You can use Isopropyl alcohol too as it is mainly ethanol with methanol to denature it. I seem to get bigger shards with pure methanol over the Isopropyl.
Also. To make anhydrous solvents. Bake some Epsom salts at 300-350f in your oven for 2.5-3 hours. Cover the baking tray with foil and then put a layer over the top. The Epsom salt seems to make a fucking mess in your oven. It will melt and dry out int a flaky white blob on your tray. Take about. 1/8th-1/4 the volume of your solvents and pour the dried Epsom into it. You want it to snow globe. That’s how you knpw
You’ve added enough to make it anhydrous.
It will leave a sludge at the bottom of the solvent container. Take from the top of the container.
Oh and the acetone you want it as cold as you can get it. Salt and ice bath or leave in the freezer for at least 8-12 hours. The colder it is the less meth it will Dissolve as methamphetamines are slightly soluble in acetone the colder the less polar it is.next grind your meth to as fine of a powder as you can.. More surface area for the solvent to pull cuts. Beware. Acetone will not remove Fentanyl, caffeine, sugar/glucose, or other chemicals they cut with. MSM
To do the recrystallization the meth needs to have no acetone in it. 100% dry. Heat up 15-30ml per gram of meth on a stove with a pot of water. Double boil that alcohol. Methanol boils lower than ethanol does. Ethanol should start to boil around 173F or 78.37C depending on the water content. Unfortunately it’s very hard to separate water from the alcohol as they form an azeotropic mixture. Desiccants like the dried Epsom salt or molecular sieves are the only way to do it.
After you have dissolved your meth in the alcohol. Anything that hasn’t dissolved isn’t meth. You ca add 1-3ml more of the hot alcohol to it. If it still
Doesn’t dissolve filter it out through a filter in a funnel. Don’t use plastic or metal. Glass if you can. The acetone will melt most plastics such as ABS and acrylics. The meth will eat away and react with metals so that’s not a good idea either.
Best way to get the purest shards is to let it evaporate slowly. Don’t move it or have air flowing over to help evaporate the alcohol. It disrupts the crystal structure from forming. Let it cool down in the pot of hot water.
If done correctly you will have a film that forms on the alcohol. Add alcohol by the drop until that goes away. Now you have a supersaturated solution ready to crystallize as it cools.
If you are having an issue with the crystal not wanting to form. Add a small shard. Like a sliver of the meth as a seed for the crystals to form off of. Or scrape the sides of the Pyrex with a glass rod.
Then once you have your crystallization done. Pour off the rest of the alcohol and meth. Save that for the next bag you wash.
Let your shards dry completely before consuming or washing with acetone again.
Most of the impurities will be on the outside of the crystalline surface. So no need to powderize again. Unless you sniff it.
