• BASIC DRUG
    DISCUSSION
    Welcome to Bluelight!
    Posting Rules Bluelight Rules
    Benzo Chart Opioids Chart
    Drug Terms Need Help??
    Drugs 101 Brain & Addiction
    Tired of your habit? Struggling to cope?
    Want to regain control or get sober?
    Visit our Recovery Support Forums
  • BDD Moderators: Keif’ Richards | negrogesic

Opioids Using a small spray bottle to nasally administer your doc

Absolutely @Larimar no probs. I couldn’t possibly comment @F.U.B.A.R that’s your business ????.

For you @Larimar, I have/buy a decongestant spray (as shown) then simply powderise my Oc’s in the same manner I would for insufflation. Then add some nasal wash solution (salt water essentially) until it dissolved. Put it in the bottle and spray up each nostril as required. Hope this helps!
 
How are you able to do volumetric dosing with this method? I have been wanting to do this with micron-filtered adderall. But I dont know how much liquid is released per pump.

What's your method?
 
Not sure it’s possible really @Mr.Deeds mate, maybe in a lab setting or with specific planning.

I only use this method to keep withdrawals at bay for a few days really. I tend to fill the bottle just over half full with boiled water that’s cooled, or nasal wash saline. I could probably get away with 80mg Oxy dissolved like shown below, but I find 160mg to be adequate a light buzz and for my needs if I can afford to do so. Hope this helps.14841
 
Last edited:
First you need to decide how much water you'll use. This bottle is 15 ml but I would probably just use 10 ml. Just put the 1 ml water into the bottle and count how many times it takes to empty it. Let's say it takes 10 pumps to empty it (0.1 ml/ pump) just like this one: https://www.medisca.com/Pages/ProductDetails.aspx?StockCode=7535&C=DEV&C3=3
Since I'll use 10 ml, it will take 100 pumps to empty the whole bottle. Let's say that we're going to use 80 mg Oxy with 10ml water. This means that every pump will deliver 0,8 mg Oxy. Knowing this, you can titrate yor dose by 0,8 mg intervals.
1 pump 0,8mg
2 pumps 1,6 mg and so on.
Don't forget to filter your solution with cotton just like you do before shooting, otherwise the particles may clog the pump and shake the bottle before spraying. You don't need to do this if you do it with cocaine. This works with pretty much all substances in salt form like MDXX, ketamine, ...
 
I was just looking at nasal spray info last night. It seems the volume of the most varies between .1ml-.12ml. That being said, I can micron filter my adderall and use a .1ml mist tip and get an average of about 7.5mg per spray. 2 sprays in each nostril and I'm good to go! Gonna try this in a day or two. I'll update at that time.
 
Good man, yeah keep us posted. Even without this method, I would urge anyone to “pre-wet” there nasal membranes when insufflating. I find there is a marked difference in absorption ?
 
So I attempted this just a little while ago.

•Crushed 5 30mg pills of generic adderall mixed salts, total 150mg amphetamine salts.
•Added 2ml of water to the powder and stirred until thoroughly mixed.*
• I drew up the thick paste into the oral syringe, difficult to do but managed to get it all in there.
• Cut off a few .5 X.5cm squares from a sheet of ~.02 micron paper, stuffed them into a ~3in piece of medical tubing and put the tubing onto the tip of the oral syringe, making sure that it was air tight to prevent leaking.
• Pushed the thick paste through the micron paper stuffed tubing, a slow process requiring the intense pressure but not enough to break the filter paper.
•After about 15min I had squeezed almost every last drop out of the paste, leaving behind sandy orange filler.
• Drew filtered solution into a separate oral syringe and then squirted the solution into a cleaned oxymetazoline mist bottle that releases .1-.12mL per spray.**

RESULTS:
2 sprays of ~7.5mg/0.1mL in each nostril provided a rapid onset, feeling the effects within 10min and peaking at 45min. Very smooth come-up. Nose is clean even though filtering process did not remove everything I wanted (my micon paper is meant to be spun under pressure in order to work correctly, a completely different topic). The only problem is the that 2mL is a very small amount of liquid for a 15mL bottle, I will have problems within the next day or two when it starts to run low.
A larger size of 750mg/10mL will be necessary for this to be of use to me for portable use. But it is a convenient ROA and storage method. Thanks @Shortec Stublue!!


*Amp has water solubility of 50-100mg/mL, so I used the median (75mg/mL) for this experiment.
**Using 75mg/mL as my amp solubility, a .1mL spray should deliver 7.5mg of amp. 2 sprays in each nostril should equal 30mg for my dose.
 
they sell bottles that squirt an exact amount per go, i've researched this heavily for yay or coke if you will, but i always come back to the conclusion that i don't give a shit if i have to carry my crack pipe with me and smoke up wherever i can, in the hospital my mom underwent surgery i'm sure i smoked in every bathroom they had =p i'll send links from my other PC to the "special" squirt bottles of all sizes/most squirt 1ml / 0.5ml or 0.25ml and are 20-30ml in size
 

Nasal Sprayer - XJT Sprayer

XJT Product Advantage (Nasal Sprayer) Food safe materials. Leakage proof. Dosage assured. Feature Nasal Sprayer, also called as Nasal Spray Pump, Nose Sprayer, Nasal Mist Sprayer, Nasal Mist Spray Pump, etc., is a pharmaceutical packaging or tool to deliver medical liquid into the nose as mist...
www.xjtsprayer.com
 
My bottle only gets brought out upon withdrawal avoidance days close to script renewal. It did minimise discomfort quite effectively indeed this past month.

Did you see my mention of the”Oxylan” I had tossed my way this morning? Not bad at all young gun not bad at all ?
 
Sertürner said:
So I attempted this just a little while ago.

•Crushed 5 30mg pills of generic adderall mixed salts, total 150mg amphetamine salts.
•Added 2ml of water to the powder and stirred until thoroughly mixed.*
• I drew up the thick paste into the oral syringe, difficult to do but managed to get it all in there.
• Cut off a few .5 X.5cm squares from a sheet of ~.02 micron paper, stuffed them into a ~3in piece of medical tubing and put the tubing onto the tip of the oral syringe, making sure that it was air tight to prevent leaking.
• Pushed the thick paste through the micron paper stuffed tubing, a slow process requiring the intense pressure but not enough to break the filter paper.
•After about 15min I had squeezed almost every last drop out of the paste, leaving behind sandy orange filler.
• Drew filtered solution into a separate oral syringe and then squirted the solution into a cleaned oxymetazoline mist bottle that releases .1-.12mL per spray.**

RESULTS:
2 sprays of ~7.5mg/0.1mL in each nostril provided a rapid onset, feeling the effects within 10min and peaking at 45min. Very smooth come-up. Nose is clean even though filtering process did not remove everything I wanted (my micon paper is meant to be spun under pressure in order to work correctly, a completely different topic). The only problem is the that 2mL is a very small amount of liquid for a 15mL bottle, I will have problems within the next day or two when it starts to run low.
A larger size of 750mg/10mL will be necessary for this to be of use to me for portable use. But it is a convenient ROA and storage method. Thanks @Shortec Stublue!!


*Amp has water solubility of 50-100mg/mL, so I used the median (75mg/mL) for this experiment.
**Using 75mg/mL as my amp solubility, a .1mL spray should deliver 7.5mg of amp. 2 sprays in each nostril should equal 30mg for my dose.
Click to expand...
So question.. will this work on Alvogen dextroamphetamine? (And possibly extract the nasty taste??) I just got my script and so far they are crap. However it could be bc I’m not taking as much and as often due to the awful taste. Any info appreciated!
 
You must log in or register to reply here.
Top