• 🇳🇿 🇲🇲 🇯🇵 🇨🇳 🇦🇺 🇦🇶 🇮🇳
    Australian & Asian
    Drug Discussion

    Welcome Guest!
    Posting Rules Bluelight Rules
  • AADD Moderators: andyturbo

Nitrous oxide, whippits, nangs, johnny gas, N2O FAQ

thanks splatt ill keep that in mind. I thought the lsd had nothing to do with it, and it was some kind of reaction to the nangs alone. fortunately i still got to enjoy the general experience despite the messy feeling in my face and side :P
 
I just had my first bulb proper bulb. Wierd, mind/thought pattern was completely normal, my body went numb, i was stuck to the sofa, I heard a ringing/buzzing sound, and my mouth tasted kinda metallic. Over in about 30 seconds I'm guessing.
Maybe I'll try it when stoned and see if it's anymore exciting!

I'm using a ISI charger - can you just suck it out of the nozzle? I've been using a balloon, was worried the gas would be too cold to inhale directly. How do you seasoned nang heads do it?
 
Straight from the charger is fine. You may find some small ice particles will come through the nozzle if you haven't dried it out completely after cleaning .

Nangs by themselves are quite tame, but when added with other substances, they add a complete new dimension to the experience. :)
 
Nangs by themselves can still be intense if you black out.
Also those ice particles could also be small metal bits from the opening on the nang.

Shoot it against yoiur tongue or the side of your mouth so you dont swallow it or shoot it down your lungs.
 
Splatt said:
Also those ice particles could also be small metal bits from the opening on the nang.
Click to expand...

Interesting point Splatt. :)

Have you ever actually seen these metal particles or do you just believe that this could occur?
 
I don't think it's a good idea to be taking it straight from the charger due to the pressure and cold temperature it can come out at.

I have also seen those tiny metal bits, I have always used newish ISI chargers so I don't think it's the charger. Actually I have seen a mate spit a metal fragment out of his mouth after having a nang.
 
lil angel, with clover bulbs ive shot them onto A4 paper.... along with machine oil.

iSi/sparkwhip seem to me made better (wider hole) so i never saw it with them.

harm reduction tip for nangers: pretened your a business ands goto a warehouse, dont buy from supermnarkets, service stations or convenience stores.. tyhey sell them as drugs. Clovers are made exclusively to abuse. They are not considered food grade. A cafe or restaurant will not touch them
 
Using iSi chargers and an iSi whipper I have never noticed any metal particles. This includes using fabric filters for entire sessions and even then there is only minimal, if any, residue.

It seems you should pay just that little bit more for a quality charger if you value your health and welfare. :)
 
Actually costs less if you do it my way, you also avoid taxes ;)
I like to Put Enlightenment Catering or Nang Nang Cafe on my invoice, check em a dodgey ABN.

I never use filters, just dont aim it down my throat. block it with ya tongue kind of thing. doing 6 or 7 in a row would be hard with a cloth or something, you'd be trying to screw a cloth into the bulberator :)
 
So last night I was pretty stoned and decided to give them anothet shot - loaded two and my vision dissapeared - i could just see a pure white, headspace was fairly lucid but maybe a little more introspective. Lasted alot longer when stoned, and seemed to go a bit "deeper". No sense of panic or anxiety. I then crawled to the toilet and vomited. Ha! 4/10
 
try it on a MDMA come down mate, stoned to hell.. then try and realise whaqt tyouve just done after 3 bulbs in a row.. preferbably around people so the group paranoia gets to you.. only way to bulb bro.

tip: control the seizure.. its not really a seizure.. its complete muscle control.. music works good for it as u can tune the muscle control with the music.. dont let others laughs get to you

i hope you crack soon, its the only way to know the truth... the truth on insanity. hope u got a strong mind :)
 
Mind is fairly strong - had plenty of deep and twisted sleep deprived k-holes. I'm just struggling to see what fuss is with nitrous. I'll save the rest for when other substances are knocking around I think.

Cheers for the info guys! :D
 
stop thinking so much.. go into a subconscious trance somehow.. or just become physical only if ytou can until you go somewhere..
most important.,. hold the stuff in.... use circular breathing to keep the n2o in while still breaking oxygen and load some more...
 
This one is for the Nang conneisseur;

Why does one MOSA nang in the box, during use, sometimes look like an ISI?







When they're still frozen they slowly go back to looking like chrome but pass through a phase that looks IDENTICAL to an ISI bulb in colour.

Can anyone answer these for me;
why do MOSA bulbs freeze up a soda syphon to the point where it has to be "rested" or switched for another syphon or creamer where ISI don't do this?

Which is is stronger out of ISI and MOSA or do you think they are the same? I think MOSA taste better but haven't found any difference otherwise and with the MOSA freezing issue the ISI's are definitely the best option.

Is the occasional MOSA miss fire due solely to misuse/over freezing or are some of them duds?

Anyone else fine the Neo/Nang combo absolutely amazing? (but rather expensive) :)

Finally, yes I have done far too much "research" into this subject :)


If any of this is inappropriate, in any way, Mods please feel free to delete.
 
Last edited:
Verybuffed said:
This one is for the Nang conneisseur;

Why does one MOSA nang in the box, during use, sometimes look like an ISI?



When they're still frozen they slowly go back to looking like chrome but pass through a phase that looks IDENTICAL to an ISI bulb in colour.
Click to expand...
i think it's just the condensation of water on the shiny metalic surface causing it to dull to a simillar appearance to the silver painted/coated isi chargers.
the reason condensation appears on it is because the bulbs low temperature is below the dew point of the room. And because the bulb is at a temperature below freezing, this condensation freezes, causes that icey grey painted look.
next time, rub it with your finger and you'll see.

Verybuffed said:
Can anyone answer these for me;
why do MOSA bulbs freeze up a soda syphon to the point where it has to be "rested" or switched for another syphon or creamer where ISI don't do this?
Click to expand...
i have not found this, but it may be because the MOSA's may discharge quicker, giving the air in the syphon a quicker rush of cold gas, and therefore 'freezing' the syphon quicker.


Verybuffed said:
Is the occasional MOSA miss fire due solely to misuse/over freezing or are some of them duds?

.
Click to expand...
my recent batch are MOSA, and i think they are CRAP. the needle on my syphon cracker must not be sharp enough because the soft metal on the bulb actually gets pushed in a little bit so that the gas escapes around the ring of the soft metal, rather than the punctured hole in the soft metal. this usually results in lost gas. i have a modded bike pump cracker that works better though with the MOSA's probably because the needle looks sharper
 
MOSA chargers vs ISI

MOSA chargers vs ISI

My first batch were ISI chargers.
after several hundred, the (ISI) soda siphon seemed quite clean.
the gas seemed clean, and they would only stuff up occassionally. (i.e. the gas would leak out without entering the siphon. i think this actually happened when unscrewing the bulb which is quite odd though memory doesn't serve me too well on this)

my second batch are MOSA chargers.
i swear i can feel particles hitting my tongue and throat as inhale.
i looked inside the siphon after it had been used for several hundred bulbs (obviously not in the one session lol), and i could see this rank grey metalic dirty residue on the plastic insides. not a lot, but very noticeable.
there was also this dirty stinky oil all inside which looked brown, but when i swabbed the inside with a tissue, it came out grey/black.
MOSA claim a higher grade than ISI, but i heavily doubt this.

One other significant problem i have found with the MOSA ones, are that at least with my ISI soda siphon, the soft metal on the bulb gets pushed in slightly before it is punctured properly by the needle in the siphon. this results in most the gas escaping to atmosphere, unless you are quick enough to screw it up. this happens quite reguarly i find.


Thoughts?
 
filtering nitrous whippits

Ive never tryed mosa chargers but ive tryed about 6 other brands including ISI and they all seem to have identical oily residue with for some reason shiny metallic particles. So it would seem smarter to just go ahead and get the cheapest ones you can get sparring those clover ones of course and find some way of filtering them. That is of course if you dont have access to medical grade. There is a device out there called nitrokit, look it up, that works on the whip cream whippers that has a provision where you can put a small carbon filter which they also sell, to filter the nitrous. But i just recently bought a brand of whippits on ebay that arent working well in the nitrokit, ill screw it down and the whippit pierces prematurely wasting more than half of it out the side instead of going down into the whipper canister. So now ive went back to my "tire" inflator cracker with a "organic" coffee filter over the top and then the balloon over the filter. It looks like it filters a bit better but is more of a pain in the ass and hard, but possible, to do two at a time in the ballon if your dexterity is good on nitrous!

nk-function.jpg
 
airscape said:
don't know if i'm allowed to ask, but are crackers available somewhere in sydney?
Click to expand...


but as for asking the question in regard to using it for the purposes of inhaling nitrous, which is an offense by the way if not medically supervised then the answer is no :)

[EDIT: mod got a spanking ;) hoptis]
 
Last edited:
You must log in or register to reply here.
Top