Rivercitybandit
Greenlighter
- Joined
- Aug 5, 2018
- Messages
- 17
Recently ive come across alot of these modified release oxys. These are not the golden coloured ones (targen) that you cannot mix up so if your looking for that look elsewhere. The 80mgs are green and the 40s are yellow although they contain layers of wax in them. I learnt some of this info online and most of it on the street. I have mixed up as many as 4 times 80mg in one shot with no problems.
Firstly you need: a soft drink can any will work, scissors or knife, lighter, plenty of swabs, filters, sterile water, at least 5ml barrels, tips or if you prefer (personally i do) butterfly clips, drawing up tips (19g) or wheel filters (optional)
Steps 1: cut the bottom of the can halfway across in a semicircle. Then push the metal inwards so if flipped upside down it should be stable and the bottom exposed for heating like a big cooker. Now clean the bottom of the can with a swab to remove the ink stamp
Step 2: use swabs to clean the coating of thr pills off, then put them in the can cooker and crush them with the base of a lighter or crush them between 2 spoons and empty powder into the can cooker. Then depending on how many pills i say 2ml per pill and add to the mix
Step 3: get 2 swabs and rip them in half but leave the swabs in their packets then roll into a cylinder then light thrm up like a candle and use that to cook the pills until it completely dissolves and you can see the wax layer looks like oil seperated from water and mix it around with the bottom of a needle barrel.
Step 4: using cold water preferably even water kept in fridge add 1 to 1.5ml of cold water and you should see all the wax solidify immediately.
Step 5: throw a filter in and draw it up using drawing up tip (19g). Once its all drawn up clean the cooker out andwash all the junk out of it then squirt the mixtute back into the clean cooker and throw a new fresh filter in and draw it up a second time just to be sure its free of any chalk or wax that can block it. Alternatively and preferably if you have a wheel filter firstly squirt water through it then after drawing up the mixtute initially from the can then squirt it through the wheel filter
Step 6: attach butterfly clip or IV tip (26-28g) and squirt out air bubbles and shoot away.
Please note its always reccommended and preferred people don't shoot pills but this is a guide for people who do and are having trouble with modified wax release pills
Firstly you need: a soft drink can any will work, scissors or knife, lighter, plenty of swabs, filters, sterile water, at least 5ml barrels, tips or if you prefer (personally i do) butterfly clips, drawing up tips (19g) or wheel filters (optional)
Steps 1: cut the bottom of the can halfway across in a semicircle. Then push the metal inwards so if flipped upside down it should be stable and the bottom exposed for heating like a big cooker. Now clean the bottom of the can with a swab to remove the ink stamp
Step 2: use swabs to clean the coating of thr pills off, then put them in the can cooker and crush them with the base of a lighter or crush them between 2 spoons and empty powder into the can cooker. Then depending on how many pills i say 2ml per pill and add to the mix
Step 3: get 2 swabs and rip them in half but leave the swabs in their packets then roll into a cylinder then light thrm up like a candle and use that to cook the pills until it completely dissolves and you can see the wax layer looks like oil seperated from water and mix it around with the bottom of a needle barrel.
Step 4: using cold water preferably even water kept in fridge add 1 to 1.5ml of cold water and you should see all the wax solidify immediately.
Step 5: throw a filter in and draw it up using drawing up tip (19g). Once its all drawn up clean the cooker out andwash all the junk out of it then squirt the mixtute back into the clean cooker and throw a new fresh filter in and draw it up a second time just to be sure its free of any chalk or wax that can block it. Alternatively and preferably if you have a wheel filter firstly squirt water through it then after drawing up the mixtute initially from the can then squirt it through the wheel filter
Step 6: attach butterfly clip or IV tip (26-28g) and squirt out air bubbles and shoot away.
Please note its always reccommended and preferred people don't shoot pills but this is a guide for people who do and are having trouble with modified wax release pills