Cocaine Le Junk's Cocaine Purification Megathread v. The Final Word

[dogbeach]

First, a big thanks to all who have spent their considerable time and effort posting information and imparting knowledge on this subject. Second, a quick question: while looking for someplace local to purchase ACS grade acetone I noticed an Onyx Brand 100% pure acetone (which i can buy nearby). Anyone have any history with this one? I don't believe it is ACS grade, but does claim to be 100% pure acetone. Anyone?

Thanks,

dogbeach

 

[Le Junk]

First, a big thanks to all who have spent their considerable time and effort posting information and imparting knowledge on this subject. Second, a quick question: while looking for someplace local to purchase ACS grade acetone I noticed an Onyx Brand 100% pure acetone (which i can buy nearby). Anyone have any history with this one? I don't believe it is ACS grade, but does claim to be 100% pure acetone. Anyone?

Thanks,

dogbeach

You should be able to pull up the particular item in questions spec. sheet which shows all other substances in it. 100% is very hard to find. I have 99.8%, but it still contains .5% water. And water is, of course, bad!

But, if you can get 100%, then definately get it! That's awsome!

Le Junk

 

[loudaudio]

refer to the process at beginning of thread... my money would be on ethanol alcohol.... melt in ..... stir .... filter....... when ready to get yay back ... dump in pie pan or some such let dry...overnight.... will look better also...but read the whole process... its worth the time

 

[Le Junk]

Thanks alot for all that top info le junk it was the first thread i have read and am amazed to read such informative & helpfull info...
i am very keen to give it a go...
You may be able to help me on another question i am wanted to find a liquid that cocaine can be disguised in and then turned back to coke when wanted??

would ether do this or does it just sit at the bottom of the bottle??

Cheers
Jonny

First off, your welcome. The pleasure was indeed all mine!

Secondly, ether is one of the three worse choices you could make if you want to dissolve your coke for a period of time, and then eventually let it evaporate back to crystals, which is what I presume your looking to do.

That is due to the fact that cocaine hydrochloride is completely INSOLUBLE in acetone, benzene, and yes, ether.

The substance your looking for is 95-99%, 190 proof, ethanol alcohol. That will entirely dissolve all of your cocaine, minus speed, and then you can later filter it back out onto a 9 inch glass pie plate, let it air dry overnight, and wake up to beautiful cocaine hydrochloride crystals.

Hope this helps.................

Le Junk

 

[Le Junk]

refer to the process at beginning of thread... my money would be on ethanol alcohol.... melt in ..... stir .... filter....... when ready to get yay back ... dump in pie pan or some such let dry...overnight.... will look better also...but read the whole process... its worth the time

If your going to go as far as using the ethanol, then I must insist you use the type of ethanol I describe on the first page of this thread. Pour all of your cleaned up cocaine into it. If after stirring, there are particals still remaining undissolved, their not cocaine and most likely some low grade speed. Simply filter the ethanol thru a medium flow filter paper (not a coffee filter paper), onto an awaiting 9 inch glass pie plate. Glass vs. metal will be much easier to scrape your final product off of.

later, Le Junk

 

[jrEwing]

it really works...kleenstrip from HD is OK

No store I went to listed the actual content of acetone in their product. I checked the website for Kleenstrip (Home Depot carries this brand) before I used it. It states "100-95%" acetone. This wasn't encouraging so I started with a small amount (2g). After the process I was left with the best 1.6g I've ever come across! It was good before I cleaned it (I tested) but after about 1hour (3rd line) I was feeling that anxious, generally unpleasant "I need more" feeling. Not so after cleaning. I did a couple lines this afternoon, felt great, and then just decided I was done for the day! Let me tell you, like most of the people probably reading this I usually do it 'til it's gone and then regret it. Anoyone considering doing this at least try it once. What have you got to lose? Thanks again Le Junk.
Another MAJOR benefit for me personally is that after the process is done, sniffing is pleasant and doesn't plug up my nose after the first 3 lines. This is one of the things I hate about coke usually and finding a way to remedy this is a godsend.

 

[xxl]

i am wanted to find a liquid that cocaine can be disguised in and then turned back to coke when wanted??

First of all water since coke is extremely soluble in water. There may be a conservation issue though. Imagine dissolving you coke in water, then pouring the solution into an ice box and put the ice-box into the freezer. When you want a line you push out one of the ice cubes then *gently" heat it until the water has evaporated, there's your original coke. But again, I don't know about how quickly coke degrades in water/ice. Common sense suggests it would degrade less in ice than in water. Even magic mushrooms keep much of their properties for months when deep-frozen. Neither do I know whether sniffer dogs would still sniff it if it's deep frozen.

I remember a headline years ago about a huge consignment of Colombian coke smuggled in whisky bottles. It may have been in the form of crack for crack is, I think, even more soluble than blow in alcohol.

 

[Le Junk]

First of all water since coke is extremely soluble in water. There may be a conservation issue though. Imagine dissolving you coke in water, then pouring the solution into an ice box and put the ice-box into the freezer. When you want a line you push out one of the ice cubes then *gently" heat it until the water has evaporated, there's your original coke. But again, I don't know about how quickly coke degrades in water/ice. Common sense suggests it would degrade less in ice than in water. Even magic mushrooms keep much of their properties for months when deep-frozen. Neither do I know whether sniffer dogs would still sniff it if it's deep frozen.

I remember a headline years ago about a huge consignment of Colombian coke smuggled in whisky bottles. It may have been in the form of crack for crack is, I think, even more soluble than blow in alcohol.

My prefered method when traveling, and bringing back some product, is to take some 91% rubbing alcohol with you. Since cocaine and most all other cuts are soluble in either water and/or alcohol, you simply pour your coke in the bottle (filled about 1/4 of the way for less evaporation time when you get where your going), shake to dissolve all the ingredients, and then your set!

Carrying rubbing alcohol with you on vacation is totally normal in case of a medical emergency etc., plus the smell should throw the dogs off into another direction.....................

Just my .02.........................

Le Junk

 

[xxl]

Colouring agents?

Before having a crack session with a first-timer, colour your crack bright blue, bright red or bright green with a colouring agent that doesn't yield toxic fumes when heated. When she (the naive first-timer) tells her folks back home about smoking some "bright green stones", they'll discount crack because there's no way crack can be anything but white or yellow is there?

Same strategy if you leave your crack lying about in a drawer.

 

[thegreendreamteam]

Hi Le junk & all, finding it tricky to find anhydrous acetone in uk, anyone know where to get over the counter??although i read on an earlier post that it is controlled.
If so you mention sodium hydroxide,100 ml...having read a little sounds like your talking also about caustic soda which comes in pellets etc.. how do i mix the solution to end up with my 100ml to add to the 99% acetone from the hardware shop.? will that work
cant wait to give it a gojust need correct products..
cheers
Jonny

 

[Le Junk]

Hi Le junk & all, finding it tricky to find anhydrous acetone in uk, anyone know where to get over the counter??although i read on an earlier post that it is controlled.
If so you mention sodium hydroxide,100 ml...having read a little sounds like your talking also about caustic soda which comes in pellets etc.. how do i mix the solution to end up with my 100ml to add to the 99% acetone from the hardware shop.? will that work
cant wait to give it a gojust need correct products..
cheers
Jonny

Go to your local hardware or home store and get a 1 liter can of acetone. You should be able to find it in the paint section. Do not use finger nail polish remover, okay?

While at the hardware/home store, also get a bag of epsom salt.

When you get home, pre-heat your oven to 200 degrees celcius. Take out a baking pan and cover with aluminum foil. Once the oven is pre-heated to 200 C., take a handful of epsom salt and spread it out over the foil. bake the epsom salt for 2 hours. Your final product should resemble that of ash.

Remove from oven and let cool. Once cool, take about two grams of the now anhydrous magnesium sulphate (formerly the epsom salt) and add it to your 1 liter of acetone. Shake well and filter into a seperate, non-plastic container. Discard filter. If your new container has an airtight lid, then your done. If not, simply pour your now anhydrous acetone back into it's original 1 liter can.

Now proceed with the directions......................................

Le Junk

 

[Fight Club]

Go to your local hardware or home store and get a 1 liter can of acetone. You should be able to find it in the paint section. Do not use finger nail polish remover, okay?

While at the hardware/home store, also get a bag of epsom salt.

When you get home, pre-heat your oven to 200 degrees celcius. Take out a baking pan and cover with aluminum foil. Once the oven is pre-heated to 200 C., take a handful of epsom salt and spread it out over the foil. bake the epsom salt for 2 hours. Your final product should resemble that of ash.

Remove from oven and let cool. Once cool, take about two grams of the now anhydrous magnesium sulphate (formerly the epsom salt) and add it to your 1 liter of acetone. Shake well and filter into a seperate, non-plastic container. Discard filter. If your new container has an airtight lid, then your done. If not, simply pour your now anhydrous acetone back into it's original 1 liter can.

Now proceed with the directions......................................

Le Junk

LJ - Great directions for the chemistry challenged among us! I know "Epsom Salts" by that name here in the US. Do you know if it is called the same thing in the UK and elsewhere? The poster above mentioned "caustic soda" and I don't think that is the same thing at all. Any thoughts?

FC

 

[Le Junk]

LJ - Great directions for the chemistry challenged among us! I know "Epsom Salts" by that name here in the US. Do you know if it is called the same thing in the UK and elsewhere? The poster above mentioned "caustic soda" and I don't think that is the same thing at all. Any thoughts?

FC

I would think it would be called the same universally. Try and locate epsom salts. If not, you could probably just order magnesium sulphate online. You can here..................

Le Junk

 

[fungal_one]

In a pinch, could a coffee filter be used instead of the medium to high flow filter papers?

 

[Le Junk]

In a pinch, could a coffee filter be used instead of the medium to high flow filter papers?

Yes.

 

[timbuck2]

Nice thread, Le Junk. Very interesting information, and you've kept it well maintained.

Have you considered posting a tread about how to change crack back into powder (base into HCL) using any similar easy-to-follow method?

 

[Fight Club]

Nice thread, Le Junk. Very interesting information, and you've kept it well maintained.

Have you considered posting a tread about how to change crack back into powder (base into HCL) using any similar easy-to-follow method?

Keep reading Tim - it's in here . . . somewhere.

FC

 

[Le Junk]

Nice thread, Le Junk. Very interesting information, and you've kept it well maintained.

Have you considered posting a tread about how to change crack back into powder (base into HCL) using any similar easy-to-follow method?

I just PM'd someone that exact info yesterday, and I'm sure it's still in my sent items folder. Just PM me, I'll cut and paste and send it to you as well.

He was wanting to take crack, clean it, then turn it back into cleaner crack. So, I'll note the change for you. Your's will be a little easier to perform.

Le Junk

P.S. You'll be performing an A/B extraction, so you'll be needing (2) 50 ml. glass Pyrex beakers, a 6 inch glass stir rod, 16 cm. medium flow filter papers, anhydrous acetone, and 31% or slightly higher muriatic acid.

Le Junk

 

[loudaudio]

sorry thats other method nevermind

I just PM'd someone that exact info yesterday, and I'm sure it's still in my sent items folder. Just PM me, I'll cut and paste and send it to you as well.

He was wanting to take crack, clean it, then turn it back into cleaner crack. So, I'll note the change for you. Your's will be a little easier to perform.

Le Junk

P.S. You'll be performing an A/B extraction, so you'll be needing (2) 50 ml. glass Pyrex beakers, a 6 inch glass stir rod, 16 cm. medium flow filter papers, anhydrous acetone, and 31% or slightly higher muriatic acid.

Le Junk

don't forget they will also need some bobwire, an old tire iron, a lenth of scrap rope, some bandaids and 1 dead rattlesnake....oh nevermind thought he was making fresh pasta....nevermind....

 

[timbuck2]

I just PM'd someone that exact info yesterday, and I'm sure it's still in my sent items folder. Just PM me, I'll cut and paste and send it to you as well.

He was wanting to take crack, clean it, then turn it back into cleaner crack. So, I'll note the change for you. Your's will be a little easier to perform.

Le Junk

P.S. You'll be performing an A/B extraction, so you'll be needing (2) 50 ml. glass Pyrex beakers, a 6 inch glass stir rod, 16 cm. medium flow filter papers, anhydrous acetone, and 31% or slightly higher muriatic acid.

Le Junk

Ooops!
I tried, but I guess I still don't qualify for P/M status, yet.
I just got this message when I hit the "send" button:

"Sorry, but you may only send Private Messages to members of staff until you reach Bluelighter status."