Here is my success story, sorry for being so lengthy...
*****This process is for snorting(or plugging). I have NOT tried to IV this method*****
I just got done railing a nice line of extracted oxycodone from an OP 80 and I didn't use any crazy solvents or have to take any drastic measures. Before I tell you just let me take you through my reasoning behind what I did.
First, all the Purdue experiments were trying to prove the effectiveness of fast extractions with different solvents. But, if you have a little patience and can stand to wait 12-18 hours for the pill to soak then your options become much more reasonable. So, while reading through the multiple mega threads I came across a link to a Purdue document stating that it was possible to ingest the new OP pills and then later see the pill (whole and intact) in your feces. But they also said that the oxycodone would have still been released into your system and what was left behind was simply the time-release matrix. This gave me an idea, so here is what I did..
Step 1: Took a 2 oz shot glass and filled it 1/3 - 1/2 way full and dropped in an 80 mg OP with the coating still (Didn't chop it up or anything like that).
Step 2: I let it sit in there overnight. After even an hour or so the pill had expanded to 2-3 times its normal size and the green/blue coating disappeared almost right away.
Step 3: I poured the liquid onto a flat glass plate and set it by the window to evaporate in the sun. I also ate the blob of a pill at this time just because I didn't want to waste anything if for some reason this didn't work. In retrospect, I should have let the pill soak longer (like probably 15 hours instead of the 10 hours I had it soaking) but I still had plenty of success. It is important that you don't touch the pill or shake the solution. Basically we are just letting the oxy work its way out of the matrix and as long the matrix is disturbed too much in the process then we can leave most of that stuff behind.
Step 4: Window was taking too long so I put the plate in the oven at the lowest temp. possible and let it dry that way. I had felt a little bit from the pill blob I ate earlier in the day so I knew I hadn't gotten 100% extracted but I wasn't even close to what I should have felt like had I taken an entire 80 OP.
Step 5: Once the liquid is gone, scrape the residue with a razor blade then dice it up to a nice powder and snort the shit out of it.
When I did it the powder was completely white and not all flaky like what you would get with the microwave/oven method. When I snorted it I felt a nice burn instantly (which was a very good thing) and could taste that drip almost instantly. As the water was almost finished evaporating I did notice that it was kind of getting some what slimy so I was worried that what I was going to snort would gel up in my nasal cavity but it didn't one bit! I had been doing the toaster oven route pretty exclusively and even that way would leave my nostrils sticky and slimy from time to time, but not this way. Yeah you have to wait a little while but you only need to use straight H2O, not all these harsh chemicals. Hell, you don't even have to remove the damn coating to do it this way. I'm just trying to wrap my head around why nobody has posted this on here yet.
This is only the second time I have ever posted on one of these forums so I don't check up on them too much but I will try to keep up with this post if you guys need anymore specifics. Worst case scenario with this method is you just eat everything!
*****This process is for snorting(or plugging). I have NOT tried to IV this method*****
I just got done railing a nice line of extracted oxycodone from an OP 80 and I didn't use any crazy solvents or have to take any drastic measures. Before I tell you just let me take you through my reasoning behind what I did.
First, all the Purdue experiments were trying to prove the effectiveness of fast extractions with different solvents. But, if you have a little patience and can stand to wait 12-18 hours for the pill to soak then your options become much more reasonable. So, while reading through the multiple mega threads I came across a link to a Purdue document stating that it was possible to ingest the new OP pills and then later see the pill (whole and intact) in your feces. But they also said that the oxycodone would have still been released into your system and what was left behind was simply the time-release matrix. This gave me an idea, so here is what I did..
Step 1: Took a 2 oz shot glass and filled it 1/3 - 1/2 way full and dropped in an 80 mg OP with the coating still (Didn't chop it up or anything like that).
Step 2: I let it sit in there overnight. After even an hour or so the pill had expanded to 2-3 times its normal size and the green/blue coating disappeared almost right away.
Step 3: I poured the liquid onto a flat glass plate and set it by the window to evaporate in the sun. I also ate the blob of a pill at this time just because I didn't want to waste anything if for some reason this didn't work. In retrospect, I should have let the pill soak longer (like probably 15 hours instead of the 10 hours I had it soaking) but I still had plenty of success. It is important that you don't touch the pill or shake the solution. Basically we are just letting the oxy work its way out of the matrix and as long the matrix is disturbed too much in the process then we can leave most of that stuff behind.
Step 4: Window was taking too long so I put the plate in the oven at the lowest temp. possible and let it dry that way. I had felt a little bit from the pill blob I ate earlier in the day so I knew I hadn't gotten 100% extracted but I wasn't even close to what I should have felt like had I taken an entire 80 OP.
Step 5: Once the liquid is gone, scrape the residue with a razor blade then dice it up to a nice powder and snort the shit out of it.
When I did it the powder was completely white and not all flaky like what you would get with the microwave/oven method. When I snorted it I felt a nice burn instantly (which was a very good thing) and could taste that drip almost instantly. As the water was almost finished evaporating I did notice that it was kind of getting some what slimy so I was worried that what I was going to snort would gel up in my nasal cavity but it didn't one bit! I had been doing the toaster oven route pretty exclusively and even that way would leave my nostrils sticky and slimy from time to time, but not this way. Yeah you have to wait a little while but you only need to use straight H2O, not all these harsh chemicals. Hell, you don't even have to remove the damn coating to do it this way. I'm just trying to wrap my head around why nobody has posted this on here yet.
This is only the second time I have ever posted on one of these forums so I don't check up on them too much but I will try to keep up with this post if you guys need anymore specifics. Worst case scenario with this method is you just eat everything!
Last edited: