One way to smoke DMT:
The bottle method.
I'm not saying it's the best, but it might be the easiest, cheapest and it works every time for me.
What you will need:
1x bottle (clear so you can see into it easily and also with wide mouth piece) 1-1.5 liters
1x scissors or knife to cut the bottle
1x lighter (blow torch lighters are too hot, you want a small flame)
1x sheet of tin foil
Simple.
Idea taken from the 'how I've smoked DMT' youtube video http://www.youtube.com/watch?v=QtckVptu4I4
................................................................................................................................
http://www.youtube.com/watch?v=QtckVptu4I4
https://docs.google.com/viewer?a=v&...Jl6rKu&sig=AHIEtbSXqALXa_zrbX5nAyS1WkI6E5rVyg
https://www.google.co.uk/search?q=d....57j0l2j62l2j61.3585&sourceid=chrome&ie=UTF-8
DMT Workshop:
http://dmt.20m.com/
http://www.dailymotion.com/video/xw3...e-dmt-workshop
DMT Hand Book:
https://www.google.co.uk/url?sa=t&rc...vCCHWBIrCDky1w
The bottle method.
I'm not saying it's the best, but it might be the easiest, cheapest and it works every time for me.
What you will need:
1x bottle (clear so you can see into it easily and also with wide mouth piece) 1-1.5 liters
1x scissors or knife to cut the bottle
1x lighter (blow torch lighters are too hot, you want a small flame)
1x sheet of tin foil
Simple.
Idea taken from the 'how I've smoked DMT' youtube video http://www.youtube.com/watch?v=QtckVptu4I4
One clear bottle with wide mouth piece so the smoke will be sucked out quicker. I find 1-1.5 liter perfect. Not too big (remember you have to empty it in one) and not too small as I find it best to have your lungs full to the max just as you empty it:
(phone for scale)
I tape foil on to the bottom just to make the cut edges smoother - though not necessary:
Foil. Run a flame arround it first to burn off any chemicals.
Create a 'well'. This I find to be very important, due to the fact you want a controlled burn and when DMT mealts and heats it runs about all over the place and when the bottle is full of smoke you wont be able to see shit and know exactly where the DMT is, more than than likely some will be hiding in one of the many creases in the foil. When you create a 'well' the DMT stays put, it doesnt move around, you know where it is and therefore where to direct the flame. It works a treat, very cost effective, trust me on this!
To create a 'well', place foil over the top of the bottle top (or anything else circular eg small roll of electric tape) so it is in the center of the foil:
Mold the foil by pressing it down into and around the bottle top that is underneath:
I have flipped it over here so you can see the blue bottle top underneath:
Cover with your 1-1.5 liter bottle:
View from above looking down, you can clearly see the 'well' you have created now inside the bottle:
Fold up the edges (not to tight, just to get a rough, LOOSE mold, we still need to add the product and if its molded too tight now, it can be cumbersome to remove and replace the bottle on and off the foil later, for now a loose fit is fine ~ though I'm being pedantic here):
Birds eye view:
Remove bottle top from underneath and screw back on the top of the bottle (though you could leave it in place untill you have added the product, maybe safer):
View from underneath (it will hold it's shape, for many hits and easy to remold):
View from the side:
Add product (I use a straw cut with scissors at an angle for accuracy etc- I picked this tip up from how Thai's handle Crystal methamphetamine on the streets and rooms of Bangkok):
10mg of product. You probably want five times as much as this and then some, its always better to overdose than under-dose (get that DMT switch flipped, you can't over do it, once its flipped its flipped and having overdosed won't make much difference. Equate it to kick starting a motorbike, you can never use too much force to fkick it over, once the engines running its running, but you can use too little a force and be kicking away at air all day, going nowhere - but still having fun sitting on a bike). Though using this method I have broke through on 20mg* (with good product):
Fold up the edges of the foil around the bottle, mold it around so it is tight. On the youtube video 'ways I have smoked DMT' http://www.youtube.com/watch?v=QtckVptu4I4 the guy tapes the bottle closed. Personally I find you do not need to to this, molding it is find and smoke rises so as long as you have the bottle top screwed on it will stay in the bottle. Also when its taped shut you cant reuse the same foil as you need to rip it open everytime to get fresh DMT in, with is a waste of time and effort.
Make sure the bottle top is screwed on the top. Burn from below with a small flame, take your time nice and slow so as not to frazz the DMT, fill with A LOT of THICK milky smoke, surprisingly it can take some time, empty your mind (though it wont matter), unscrew top, big breath - down in one, hold breath as long as you can, BOOM, switch is flipped - welcome to that idiosyncratic, HD pattern-y-jarring-madness.
Good luck
(phone for scale)
I tape foil on to the bottom just to make the cut edges smoother - though not necessary:
Foil. Run a flame arround it first to burn off any chemicals.
Create a 'well'. This I find to be very important, due to the fact you want a controlled burn and when DMT mealts and heats it runs about all over the place and when the bottle is full of smoke you wont be able to see shit and know exactly where the DMT is, more than than likely some will be hiding in one of the many creases in the foil. When you create a 'well' the DMT stays put, it doesnt move around, you know where it is and therefore where to direct the flame. It works a treat, very cost effective, trust me on this!
To create a 'well', place foil over the top of the bottle top (or anything else circular eg small roll of electric tape) so it is in the center of the foil:
Mold the foil by pressing it down into and around the bottle top that is underneath:
I have flipped it over here so you can see the blue bottle top underneath:
Cover with your 1-1.5 liter bottle:
View from above looking down, you can clearly see the 'well' you have created now inside the bottle:
Fold up the edges (not to tight, just to get a rough, LOOSE mold, we still need to add the product and if its molded too tight now, it can be cumbersome to remove and replace the bottle on and off the foil later, for now a loose fit is fine ~ though I'm being pedantic here):
Birds eye view:
Remove bottle top from underneath and screw back on the top of the bottle (though you could leave it in place untill you have added the product, maybe safer):
View from underneath (it will hold it's shape, for many hits and easy to remold):
View from the side:
Add product (I use a straw cut with scissors at an angle for accuracy etc- I picked this tip up from how Thai's handle Crystal methamphetamine on the streets and rooms of Bangkok):
10mg of product. You probably want five times as much as this and then some, its always better to overdose than under-dose (get that DMT switch flipped, you can't over do it, once its flipped its flipped and having overdosed won't make much difference. Equate it to kick starting a motorbike, you can never use too much force to fkick it over, once the engines running its running, but you can use too little a force and be kicking away at air all day, going nowhere - but still having fun sitting on a bike). Though using this method I have broke through on 20mg* (with good product):
Fold up the edges of the foil around the bottle, mold it around so it is tight. On the youtube video 'ways I have smoked DMT' http://www.youtube.com/watch?v=QtckVptu4I4 the guy tapes the bottle closed. Personally I find you do not need to to this, molding it is find and smoke rises so as long as you have the bottle top screwed on it will stay in the bottle. Also when its taped shut you cant reuse the same foil as you need to rip it open everytime to get fresh DMT in, with is a waste of time and effort.
Make sure the bottle top is screwed on the top. Burn from below with a small flame, take your time nice and slow so as not to frazz the DMT, fill with A LOT of THICK milky smoke, surprisingly it can take some time, empty your mind (though it wont matter), unscrew top, big breath - down in one, hold breath as long as you can, BOOM, switch is flipped - welcome to that idiosyncratic, HD pattern-y-jarring-madness.
Good luck
http://www.youtube.com/watch?v=QtckVptu4I4
https://docs.google.com/viewer?a=v&...Jl6rKu&sig=AHIEtbSXqALXa_zrbX5nAyS1WkI6E5rVyg
https://www.google.co.uk/search?q=d....57j0l2j62l2j61.3585&sourceid=chrome&ie=UTF-8
DMT Workshop:
http://dmt.20m.com/
http://www.dailymotion.com/video/xw3...e-dmt-workshop
DMT Hand Book:
https://www.google.co.uk/url?sa=t&rc...vCCHWBIrCDky1w
Last edited:
