• Psychedelic Drugs Welcome Guest
    View threads about
    Posting RulesBluelight Rules
    PD's Best Threads Index
    Social ThreadSupport Bluelight
    Psychedelic Beginner's FAQ
  • PD Moderators: Esperighanto | JackARoe | Cheshire_Kat

The Big and Dandy DMT Thread - The Fourth Dimension

Status
Not open for further replies.
Is it ok to freeze DMT for 3-4months?. It doesnt lose any potency in the fridge right?. is it ok to use a regular ziplock bag?.

And can dmt last more then a year in room temp?.
 
Last edited:
Haha yah get a cool lookin' amber vial. And print out a custom label for it with esoteric numbers and letters and such that reads like SAMPLE # 45A922B. When your friends are over, refuse to touch the vial without full protective gear on -- lab coat, goggles, neoprene gloves, etc.
 
Gaian Planes said:
hey I've done a few different acid-base teks. Honestly, your best bet is doing a 'straight to base' extraction. Search for that...its so simple. When you get a finished product, if its a little dirty (yellowish with tannins), you just do a recrystalization (takes only a few minutes). You end up with a very clean product (pure white or even translucent) with only a little work and no need to muck around with acidifying the solution, etc.

just load that shit up with base (a LOT of NaOH!). Make it basic as FUCK, it will strip a ton of alkaloids out of the plant and then you just use naptha to extract it (then evap voila).
Click to expand...

Gaian Planes, the way you do it, do you evap in the freezer?

Or do you evap the total volume of naptha down to, say 10%, and then stick that in the freezer to precipitate and evaporate?

Because it takes quite a long time to evap in the freezer and it seems to me that evaporation in room temperature will give you goo not crystals...

care to clarify? When your ban runs its course of course =D
 
BLUEDOLPHIN: i don't know how he does it but heres a few ways of doing it that yield different results:

evap total volume down to extremely low at 'room temp', then stick it in the freezer for 2 to 24 hours. depending on how much you evaporated at first you can get all the dmt to 'snow' out of solution real fast. throw out the remaining naphtha and dry out your crystals. very clean very small crystals. dont let there be alot of naptha when your drying your crystals or eles they will melt back down kinda and make an icky mixture of gooey crystal gunk/ oil. wash off your naptha before you dry. this is the best and easiest way to do it for crystals.

evap all the way at room temp. this will leave you with two diferent outcomes: either you will get a dmt oil or you will get reletivly large crystals. i think it has to do with the tempurature/pressure in the room/outside and how pure the dmt was. after this i usualy recrystalize. and its usualy by mistake that i leave out a dmt/naptha tray or something.

dont try to evaporate in your freezer thats like trying to evaporate water in your fridge. unless you can drop the pressure in your freezer to near vacuum. i actualy want to do an experiment where you lower the pressure alot but keep it real cold.

what you can do is also extract with real hot naptha and just let it slowly reach room temp then put it in the fridge then finaly the freezer for real large crystals. ive done this and just after the room temp step i got some of the largest yeilds as well as crystals ever. it was ridiculous how clear the crystals were too.
 
bluedolphin said:
Gaian Planes, the way you do it, do you evap in the freezer?

Or do you evap the total volume of naptha down to, say 10%, and then stick that in the freezer to precipitate and evaporate?

Because it takes quite a long time to evap in the freezer and it seems to me that evaporation in room temperature will give you goo not crystals...

care to clarify? When your ban runs its course of course =D
Click to expand...

Hey BD,

Evaping at room temp under a slow fan will give you large crystals.

My favorite method is evaping ~60-75% of the naptha then sticking it in the freezer. As IGNVS mentioned, that just makes the DMT drop to the bottom and and sides of the container you're using and just stick to it.

And the Naptha can actually be reused in future extractions.=D
 
I want some DMT again.

WANT, not need. But I would realy like to go hyper space if I could manage a perfect set and setting IMO.
 
The perfect set and setting for DMT hyperspace is when you are already on some Ketamine. They love each other.
 
bluedolphin said:
Because it takes quite a long time to evap in the freezer and it seems to me that evaporation in room temperature will give you goo not crystals...
Click to expand...

hey bluedolphin I used to think that when you evap at room temperature all you get is goo too. This is incomplete evaporation, just leave it out longer. I live in a hot climate and it takes 1-3 days for a shot glass to evaporate to goo and another 3-5 days to form the completed crystals. They will form, its just a matter of time, try it.

Aaaah all the extractions where ive thought i failed and had to scrape up the goo mess and transfer to the smoking vessel! So much lost DMT !! :(
 
Which Plant contains the most DMT?

which of the following is best to extract DMT from

psychotria viridis
Psychotria carthaginensi
Psychotria alba
Justicia pectoralis
Delosperma...
or any other ones?

i couldnt find any information about this in Search Function.
 
Last edited:
i just tried a half and half mix of my red DMT (from a xylene extraction) and normal yellow DMT.

I know there is a thread somewhere here on the red DMT i havent read it yet but its definitely very different to the other stuff im used to. More uh enveloping with a slightly darker overtone which could just be my interpretation of it (probably).

Anyway back to it. IT WAS PERFECT. surely there are other people who have tried this??

I did test each one by itself before mixing together(all a couple days apart, i dont dose more than once on any day), and got very little effect from the yellow normal stuff. I classified it as a shotty job by myself as it was very weak DMT, wich i didnt expect because i do it the same everytime and i have good equipment. But mix a little of the red stuff and its like 10 times more potent. Got surprising results from just one large hit.

Its like its got that astonishing clarity of the yellow DMT but 10x more potent than the yellow stuff on its own. And none of the effects the red stuff has.

AHA jungle dmt thats what its called.
Im still feeling decent after effects as i finish typing this.
 
dtasrt_lk said:
hey bluedolphin I used to think that when you evap at room temperature all you get is goo too. This is incomplete evaporation, just leave it out longer. I live in a hot climate and it takes 1-3 days for a shot glass to evaporate to goo and another 3-5 days to form the completed crystals. They will form, its just a matter of time, try it.

Aaaah all the extractions where ive thought i failed and had to scrape up the goo mess and transfer to the smoking vessel! So much lost DMT !! :(
Click to expand...

and ive had a sample that turned to goo thats stayed goo for the past 3 months. last dose i own. :(


it realy depends on the temperature and pressure and the purity of spice. with a fan on your changing the pressure remember.
 
Youkai said:
I want some DMT again.

WANT, not need. But I would realy like to go hyper space if I could manage a perfect set and setting IMO.
Click to expand...


do you foresee you self using psychedelics again?
 
Status
Not open for further replies.
Top