• Psychedelic Drugs Welcome Guest
    View threads about
    Posting RulesBluelight Rules
    PD's Best Threads Index
    Social ThreadSupport Bluelight
    Psychedelic Beginner's FAQ
  • PD Moderators: Esperighanto | JackARoe |

Proposed NBOMe laying plan (Start to finish)

C

Crack Wizard

Greenlighter
Joined
Nov 16, 2012
Messages
19
Someone i know proposed this method of laying blotters, he's never done it before and has been preparing tek and learnin everything he possibly can.

Heres his tek:
-1G 25c-NBOMe Hcl
-Lab grade micropipette capable of measurements 50-250 ul (microlitre)
-500ml 90% Ethanol
-900 7.5mm water absorbing blotter
-Jewelery scales capable of milligram measurements
-Necessary measuring beakers


Step 1: Test blotter paper for water retention, aiming to confirm 1 7.5mm square can hold 100 microlitres

Step 2: Mix NBOMe with ethanol at a ratio of 10mg/1ml (To yield 1mg per 100ul drop)

Step 3: Heat up solution slightly and stir/shake bottle until fully dissolved

Step 4: Place sheet of blotter suspended over a surface (Possibly using upside down bottle caps, so the bottom side of the blotters arnt touching a full surface.

Step 5: Proceed with the micropipette to drop 1 drop on each square

Thoughts?
 
Last edited:
You aren't fooling anyone, nor taking away blame from yourself. We don't allow SWIM, or other synonymous terms, because everyone knows the the person you are talking about it you.

Good luck though OP I wish I could help with your problem <3
 
Preface: i'm posting this for HR purposes... clearly guy is going to do this no matter what. and clearly he visits other sites so who knows what questionable advice he might read. might as well minimize the damage.

OP, here is some feedback for your plan. you must have been really fucked up on drugs to think you were talking to a house fly.
please do not distribute these blotter as LSD. in fact, please do not distribute this stuff at all unless you have fully explained the risks to the user (be sure to use the phrase "already associated with at least one death")

Step 2: you should make a the solution much more dilute. you need reasonable dosage increments. no one should start with 1 mg, and no one should jump from 1 mg to 2mg. and you don't want to be fucking around cutting tiny pieces of paper in quarters when you could just make reasonable strength blotters at the start.
step 3: heat is not necessary
step 4: separate all the tabs so you don't have to worry about capillary action during evaporation. spread them out on a plate or something you can wash afterwards.

other than that you are in okay shape assuming your pipette is truly lab grade (ie not something in the $10 - $20 range).
you did not indicate how you plan to calculate the solution strength. here you go:

(25 mg)/(1250 mL) = 20 ug/mL = (200 ug)/(100 uL)
 
Ok, I've edited the original post. As it may have come to light that the 3rd person shit they pull on drugs-forum is of no use.

But the point still stands, whether you deem that i'm "in it for the $$$" or not. Trust me, i am not reckless with NBOMe, i am not stupid. Please dont make assumptions based purely on me using the 3rd person approach. There is certainly no slacking on my part. If something in my technique is dangerously wrong, then please, let me know, that is why im here. I know given the nature of nbome care needs to be taken, but you have no reason to assume care is not being taken
 
They tek you have stated will work, it's how I do it and works very well. But as Twelve stated, you should lay each tab at a lower dose. You never know if these will get into the hands of someone thinking it is LSD. Harm reduction is key... Some artist's have taken to making "25i/c/ect" blotter paper, Always a thought.
 
1mg of 25I would be a hefty dose for many people, and 25C is even more potent than 25I. I'd shoot for 300-400ug per blotter, so that one blotter would be a threshold or light trip, two or three would be a stronger one, and four would be heavy but still manageable.

I'm guessing you're doing this for distribution and not just for personal use, since you're laying an entire sheet. Once this gets passed on to friends of friends of friends you will have little control over the usage patterns of people three or four links away from you, so plan ahead for the inevitable hardheads and morons that will gain access to this material. The dosage you choose is a form of communication, and it's better to err on the side of caution here, especially with substances that have so little margin of error.

Also, please clearly indicate on these blotters the substance laid on them and the exact dosage.
 
Crack Wizard said:
Step 1: Test blotter paper for water retention, aiming to confirm 1 7.5mm square can hold 100 microlitres
Click to expand...

Forgive me if I'm way off here, I am entirely novice with the subject. How could a blotter of said size possibly hold more than its own volume? Assuming a common blotter is what, 0.3mm thick? That leaves us with 7.5*7.5*0.3 = 16.875. Are you saying you want 100µl to fit inside 16.875µl? No...
 
You must log in or register to reply here.
Top