Opioids MScontins

[BackSeatSuicide]

I posted a question about this a week or so ago, but never really got a reply, except one person who said he would like to kno as well. I've googled it, and have heard mixed things, and that some brands work better then other. THe ones I just got are the MScontin 60mg with an M inside a square on the back. I really want to try IV'ing these, I've wanted to IV morphine for awhile, but the kind that I am prescribed are the Kadians, the ones that have the small white, wax beads inside a capsule, and I was told that you Can snort, smoke, IV, or even plug if you wanted to (which i refuse to ever plug anything, i dont care how good of a high it is lol) so can someone please give me a good answer, or a link to a good answer that shows me how to go about prepping MScontins for IV. Thank you in advance for any helpful replies.

 

[ONandOFF777]

The ones you have will not prep well for IV. The only ones that I have had any success with are the Ethics brand with Exxxx on one side and the dose on the other. The ABG and M box both produce a very oily waxy liquid that does not seem to produce the same effects as the Ethics.

The method can be found all over bluelight as I know I have personally posted it many times however I would not suggest doing this with the pills you have and without a micron filter.

I have had success with Kadians though. All you have to do is crush up the little balls add cold water and micron filter.

Hope this helps.

 

[BackSeatSuicide]

Yea, i dont have a micron filter, and the only place i kno where to get one is online, so I am going to have to get one soon. I dont IV all that much, just once in awhile, when I feel like getting fucked up. I do like IV'ing those Exalgo ER's tho (the ER Dilaudids) but you have to add a lil extra water and filter it twice through cotten to get it so its not so sticky, but if you do it properly, they give you that awesome Dilaudid rush, but I wanted to try IV'ing morphine cause I wanted to IV Something that has a high that last awhile. Dilaudid is all rush, which its an awesome rush, but after the rush is gone you only feel high for like 5-10min. DO you think that if I used the method of "Cripsing" the MScontin i have, then it would work for shooting. Cause I heard that works for the new Oxycontin OPs. I havent done it mysef, but I've watched people do it with the new Oxy OP's, and they got hella high off em. I also Have some Oxycodone 30's (the ones with out tylenol or anything) and i heard that if you crush those up that they are good for IV'ing, since they are IR's and theres not ER/SR stuff in them. Obviously tho, with any pill you would have to filter it properly.

 

[rxpirate]

The M boxes can be IV'd I did them for about 4 years. Just take the coating off, crush the pill, put in 1cc of water and a pinch of epsom salt and cook till boils. Because of the wax it melts together but unlike the ABG's which turn the whole cooker into a waxy mess the M's stay in one chunk of wax but the salt extracts the morphine out. People always say you shouldn't cook pills, but I did this method for years and it works. I read on here some time ago that you can just mix with cold water and do it which works too but you don't get as strong of dose that way.

 

[ONandOFF777]

If you have 30mg Oxy IR’s and looking to IV something go with those. These are easy to do with just cold water and a cotton filter.

I have never tried the crisping method with the morphs, but I would stay away from it as I personally do not think it works and is not worth the risk without a micron filter.

For the MS Contin, crush the pill to a fine powder, heat about 150 units of water in spoon to a rolling boil, dump in powder and stir quickly, add a little more heat, drop in cotton and suck up quickly. Let the solution cool completely and then re filter with a micron filter.

That’s the best I can tell you but again with the brand you have it does not work very well and I have never had much success.

Just stick with the oxys.

 

[IndustrialStrength]

If you have 30mg Oxy IR’s and looking to IV something go with those. These are easy to do with just cold water and a cotton filter.

I have never tried the crisping method with the morphs, but I would stay away from it as I personally do not think it works and is not worth the risk without a micron filter.

For the MS Contin, crush the pill to a fine powder, heat about 150 units of water in spoon to a rolling boil, dump in powder and stir quickly, add a little more heat, drop in cotton and suck up quickly. Let the solution cool completely and then re filter with a micron filter.

That’s the best I can tell you but again with the brand you have it does not work very well and I have never had much success.

Just stick with the oxys.

I'd agree with this post from personal experience.
I've IV'd pretty much every brand of MS Contin available in the US with varying degrees of success.
The method posted in the quote above works, though I don't stir after dumping in the powder.
I also after sucking up the solution, do a second cook with another 150 units that I put into a 2nd needle.
I then micron filter both the solutions & end up with 2 - 3 micron filtered shots.
2 - 3 shots using 1ml insulin syringes that is.
If I have the proper points for my luer locks I'll just use a 3ml rig & a 31 tip to do it all at once.
It really just depends on tolerance, as IIRC Morphine is soluble at 65mg per ML.
Thus depending on the amount of Morphine involved the amount of water needed & the size of the resulting shot would vary.

As stated by the above poster, be sure to let the solution cool completely before micron filtering.
If you do not cool the solution completely, even with a micron it seems you end up with a slightly "foamy" solution.
So be sure to cool the solution before micron filtering.
I've had decent success with this method but it is slightly hit or miss.
As sometimes the filter does seem to clog or some particulates seem to get through.
In which case I usually just micron filter a second time with another filter.

Again though as the above poster mentioned 30mg IR Oxycodone's are easier to IV.
I myself just crush, backload in a 3ml Luer Lock, suck up water, shake, attach micron, filter & have at it.
Relatively easy compared to working with ER Morphine.

Hope the above information helps you & also helps to confirm the above post.

 

[BackSeatSuicide]

I have a really small mesh filter i found that was used for tea bags, the holes in it our about as tiny as the ones I see on the micron filters i've seen online. But I'm not quite sure how to use one. so once i suck teh solution up into the syringe, do i just spray the contents through the micron filters back onto the spoon ?

 

[sekio]

That's not a micron filter. It's a tea bag. There is no homemade substitute for micron filters.

I think you've got your "good answers" and a few bad ones.