IVing opana ER?

[cj]

If you simply try to crush opana and mix it with water you will end up with sludge that is as thick as molasses. The correct way to IV opana is as follows:
1) remove coating with wet cloth i.e. a t-shirt
2) crush pill into fine powder
3) mix powder with 10ml isopropyl alcohol in a shot glass
4) filter liquid the easiest way is to stuff a piece of cotton into a 10ml syringe fill syringe then squirt liquid into separate shot glass not the one swiy used in step 3
5) now the alcohol must be boiled off slowly a stove works great as well as a candle don't worry the vapors will NOT explode or anything like that.
6) swiy should now have a layer of waxy residue at the bottom of glass now add 100 - 110 units of water use the cap of the syringe to break up the residue and mix it all up then gently reheat for about 30 secs the wax will not dissolve then drop in a piece of cotton and draw it up into the syringe.
This tech was originally posted by spoonbender420 and it is very effective if swiy tries this be EXTREMELY careful swiy could very easily make a LETHAL hit start with 1/8 of a 40 mg pill or less. If swiy really wants to IM it any large muscle will work just find a nice firm spot on the thigh or arm just above the bicep opposite the arm pit but be warned it will burn like hell swiy is much better off IVing it.

I found this guide using TMFSE but its from 2009 is this still an effective strategy?

 

[NeighborhoodThreat]

This is more of Other Drugs' forte.

I'll move it over there for ya.

BDD --> OD

 

[cj]

Theres another guy in the ame thread saying that he crisped the pill by heating the powder alone in a spoon then adding water and sucking it up real fast. That seems way simpler but pretty sketchy as wouldnt the heat damage the oxymorphone?

edit I realize all methods have inherant risk involved but im dead set on doing this.

 

[tricomb]

If you're going to do this, that guide needs to be revised for safety.

For example:
Step 1, do not use a T-shirt, use a sterile alcohol swab.
Step 4, do not use a cotton swab, use a micron filter
Step 5, do not use open flame, it may not "explode" but this is a fire hazard. I recommend using the heating element on a coffee maker.
Step 6, do not use a cotton swab, use a micron filter.