• Welcome Guest

    Forum Guidelines Bluelight Rules
    Fun 💃 Threads Overdosed? Click
    D R U G   C U L T U R E
  • DC Moderators: ghostfreak | VerbalTruist

Improving my freebase....

sigmond said:
What happens if I add ammonia to crack?

Does this only work with powder?
Click to expand...
Çould you please walk me through the process. I'm starting out with 2 gr. Excellent powder and have the proper ammonia.... please ?
 
0bad0boy7 said:
Let me clarify my question. To make the the salt form of coke, cocaine HCL to a free base cocaine, crack, the best method is with no heat and ammonia added dropwise. However, that is starting with coke HCL, where would you start with bicarb crack.
Click to expand...
 
Can you walk mé through your process please, no heat,dropper,etc.I have 2gr excellent powder to start
Thanks
 
Soccertrendy said:
So I'm in the UK, The cocaine isn't as good as other places.
So right now I have 3 sources for what I'd class as decent. Above average.
Anyway the way 95% of people here "washes up/rocks up" cocaine is to put bit on a spoon say up to a gram add 9.5-11% ammonia put a lighter underneath till it splits or separates not sure how best to describe it. Then stirr till it comes back to something hard drain it and then rinse with water in same spoon then smoke.
My quickfire questions for now are
What's best way to know you have heated it enough? Is there a tell tale sign? Can you heat it for too long and be detrimental to quality of end product?
One of the sources stuff goes hard almost as soon as the ammonia touches it sometimes other times if heated just right it may do the oil/split kinda thing but also when it does turn to rock its very difficult to melt again like all other stuff usually does, i mean in Ammonia or water it just dances about in near boiling ammo or water what could this be? Good or bad sign?


When I put my crack/rock/freebase into water to melt/water wash it what do I need to watch for? Is most of the stuff that hardens back good?
That's all for now I know there are far better ways to do things but I have experienced good results from other people (and myself) using this method so right now I want to use this due to circumstance when I have more time and product I'm going to attempt some other more advanced methods.
Any help is greatly appreciated also I have a little bit here and I don't Want to rock it till I have heard your answers.

P.s I can already do it, just want to make sure there's not something I could be doing better as I'm pretty much self taught. Never done it infront of anyone else who could advise me


Thanks in advance
Click to expand...
Ammonia whip
 
negrogesic said:
I've never heard of people making freebase by heating ammonia and cocaine in a spoon, but it sounds a little sketchy. Heating ammonia (ie, ammonium hydroxide) produces ammonia gas, which is pretty nasty stuff. Granted, one can't fit that much ammonia on a spoon, so it won't generate much, but considering how often times one cooks many batches during a crack binge, the exposure could add up and might be harmful (especially since that exposure will be followed by significant additional stress to the lungs through the crack smoking process itself). The other concern would be residual ammonium hydroxide contamination of the crack if not properly washed.

Why not stick to the baking soda method?
Click to expand...
This is one of the best ways to make freebase. Male sure you're using only ammonia, in a 10% ammonia 90% water formula. Its dummy proof and extremely pure freebase cocaine. It's spoiled me and I hate bicarb rock now
 
DQO94 said:
This is one of the best ways to make freebase. Male sure you're using only ammonia, in a 10% ammonia 90% water formula. Its dummy proof and extremely pure freebase cocaine. It's spoiled me and I hate bicarb rock now
Click to expand...
My friend uses a spoon, ammonia and a nickel. Ive been spoiled and my.plug always rocked it up for me, but he got caught recently. My friend then showed me this process, but I seem to keep fucking it up. What do I look for? Do I burn the ammonia til it's been evaporated? I burned the ammonia away, and I was left with like oily slimy looking stuff and when it hardened it turned white. Is that what I want? I know these are amateur questions, but like I said I never had to rock it up mysel
 
trevrett said:
Because ammonia is, as far as I'm concerned, far superior, stronger, cleaner. The ammonia you use is only household ammonia, 10%/ammonia 90%/water. You never bring it to a boil, you only warm it, slightly. Fumes are negligible to virtually nonexistent, and ammonia is NOT flammable at 10% solution. The rock that forms is immiscible with ammonia (cannot chemically mix, like oil and water) so the only remaining ammonia is easily rinsed off. Some people do several rinses to be extra cautious. However, because ammonia is a gas, it evaporates completely, and quickly, which is why it's the predominant ingredient in window cleaner. A thoroughly dried rock cannot retain ammonia. People who have used bicarb for years will argue furiously, terrified to be wrong, but there is no doubt to me it is much stronger, hits you harder. Bicarb rock is bulkier, because the cocaine molecule binds to the bicarb molecule (which street dealers love for you to see.) No matter what you do, soda cook WILL contain bicarb, which you WILL smoke. If you use slightly too much soda, which many, many people do, it will be in there. Moreover, especially for newer users, there is 1001 ways to screw up a soda cook. Ammonia takes me (literally) under 3 minutes to complete (though you need to dry it.) There is virtually no way to screw it up. I could do it on a moving bus. It often returns 90%-95% + weight, if you're original product was good. It is, IMHO, simply a finer, easier, more productive end product. I would never use bicarb again, nor, I may point out, will anyone else I know who's tried this method. When I learned the process I was FURIOUS nobody had known/mentioned it to me before.
Click to expand...
Sadly I'm one of the people who've screwed up doing this method. I don't know what I did wrong. Idk how much ammonia I'm supposed to put on the spoon, and how much coke. I'm not supposed to use a torch? It kept bubbling and burning me. Lol my plug always rocked it up for me, so Im super spoiled and never had to do this myself.
 
jamaica0318 said:
My friend uses a spoon, ammonia and a nickel. Ive been spoiled and my.plug always rocked it up for me, but he got caught recently. My friend then showed me this process, but I seem to keep fucking it up. What do I look for? Do I burn the ammonia til it's been evaporated? I burned the ammonia away, and I was left with like oily slimy looking stuff and when it hardened it turned white. Is that what I want? I know these are amateur questions, but like I said I never had to rock it up mysel
Click to expand...
This is the best way to make free base- take a couple grams of powder, put it in a Mason jar with warm, not hot but warm water and mix. Let it dissolve. Get 10%/90% ammonia/water mix (10% ammonia) is hard to find so you can use off the shelf stuff but make sure you get the fragrance and additive free ammonia. Take an eye dropper and add drops to the water mixture. You'll see a white cloud in the water. Use a glass stirring spoon or rod and stir slowly not touching the jar. Add ammonia slowly, use a few drops at a time. You'll get a white sticky ğoo on your spoon which are the additives to the c*key you don't want. Keep up the process until you see bright white rocks forming on the utensil. Note your ready to rock and roll. Add more ammonia and mix well. Add ammonia until the water no longer produces white clouds. Let it settle. Take another Mason jar and put 2 coffee filters on it and strain the water/ ammonia mix into jar. Rinse the fine rocks 3-4 times to make sure all ammonia is off. Pick up filters and gently squeeze access water, use a spoon and make sure all the fine rocks are in the middle of the coffee filters. Gently squeeze it together making sure not to rip the filters. Transfer your fine powder rocks to a new filter and let dry. I've used a hair dryer on low and wrapped the coffee filter around itself a few times to make sure you don't blow your shit out of there. It's not going to be in regular rock form but it'll be a fine powder of freebase. Better to vaporize and smoke this way. This is clean, professional way and pretty pure if you do it right. Happy smoking guys and make sure you do it in moderation, it's can get away from you quickly so have discipline and don't ruin your life. Peace
 
Thank you so much. So with the mason jars, do I use like a low heat? I'm so sorry, I know am asking such basic questions but I've already ruined 3 grams of my shit (because I didn't know the sticky shit on the bottom of the spoon was shit I didn't want) and the friend who's made it for me left his ammonia with me, but in all the times I watched him, he never rinsed it.
 
jamaica0318 said:
Thank you so much. So with the mason jars, do I use like a low heat? I'm so sorry, I know am asking such basic questions but I've already ruined 3 grams of my shit (because I didn't know the sticky shit on the bottom of the spoon was shit I didn't want) and the friend who's made it for me left his ammonia with me, but in all the times I watched him, he never rinsed it.
Click to expand...
All good! No heat at all. Rinse for sure. Just pour water over the coffee filters a few times
 
prolific-universe said:
This is the best way to make free base- take a couple grams of powder, put it in a Mason jar with warm, not hot but warm water and mix. Let it dissolve. Get 10%/90% ammonia/water mix (10% ammonia) is hard to find so you can use off the shelf stuff but make sure you get the fragrance and additive free ammonia. Take an eye dropper and add drops to the water mixture. You'll see a white cloud in the water. Use a glass stirring spoon or rod and stir slowly not touching the jar. Add ammonia slowly, use a few drops at a time. You'll get a white sticky ğoo on your spoon which are the additives to the c*key you don't want. Keep up the process until you see bright white rocks forming on the utensil. Note your ready to rock and roll. Add more ammonia and mix well. Add ammonia until the water no longer produces white clouds. Let it settle. Take another Mason jar and put 2 coffee filters on it and strain the water/ ammonia mix into jar. Rinse the fine rocks 3-4 times to make sure all ammonia is off. Pick up filters and gently squeeze access water, use a spoon and make sure all the fine rocks are in the middle of the coffee filters. Gently squeeze it together making sure not to rip the filters. Transfer your fine powder rocks to a new filter and let dry. I've used a hair dryer on low and wrapped the coffee filter around itself a few times to make sure you don't blow your shit out of there. It's not going to be in regular rock form but it'll be a fine powder of freebase. Better to vaporize and smoke this way. This is clean, professional way and pretty pure if you do it right. Happy smoking guys and make sure you do it in moderation, it's can get away from you quickly so have discipline and don't ruin your life. Peace
Click to expand...
I don't have Ammonia. What house hold cleaners and exact process step by step to do this. I do mmine the Bio way but would like to do the Freebase way.
I'm currently using about a zip a Day and need to increase my potency
 
You must log in or register to reply here.
Top