Heroin How do YOU smoke your heroin?

[Vein Melter]

I'm a smoker of heroin (now only brown #3 as I'm in Europe and sadly don't have access to lovely Asian #4).

My technique is what I assume to be pretty normal - tube of rolled up foil as a pipe, a foil plate to run the gear on and an adjustable low flame lighter.

But I got to thinking, does everyone actually do it this way? Does anyone here have any other preferred smoking methods?

 

[Zopiclone bandit]

does everyone actually do it this way?

Yes

 

[BadBoy377]

Yep, how else would you do it?

 

[Zopiclone bandit]

Yep, how else would you do it?

Some people make a kind of Cup / Pot out of foil, dumb the whole load of powder into it & then heat it up from the bottom & suck up the smoke.
Imagine a cross between the classic looking Meth Pipe & you get the idea.

It is rare people do it this way, 99% of people "run" the Heroin on foil & smoke lines but I have heard of people smoking Heroin the way I posted about at the start.

 

[Bleaney]

I used to smoke MDPV out of those tea candle holder foil cups. They were ideal for the purpose! Balanced off the edge of my desk with a pencil holding it in place, with enough of the foil cup sticking out to be able to heat it.

They were great for that. But PV was so cheap and so little would go a very long way, that I'd just gently heat the PV until I saw vapour rising, and then simply take a deep breath to breathe it all in, no straw devices etc.

When a heroin user saw my technique and method, which I had tried to adapt my PV method to the 'foil plate' they were quite horrified as to how wasteful it seemed. I don't know, it always seemed effective to me with PV. And I must have caught something with the heroin vapour.

But I must defer to that other person as they were a great deal more experienced than me, when it came to smoking heroin.

 

[PenguinWithNapalm]

I just take a rectangle of foil and put a piece of H like a little smaller than a pea and chase it with a hollow pen

 

[Perkins : Reborn]

That's a good way to end up breathing molten plastic if you're not careful.

I hate the rigmarole of smoking. I find it's more tolerable by using a Clipper and holding it (significantly) further away from the foil. But I'll use a small flame if necessary.

 

[BadBoy377]

I think the advantage of having a foil tooter is after a sesh or two you can unroll it and vaporise then purer stuff that's built up on the inside.

 

[Perkins : Reborn]

I think the advantage of having a foil tooter is after a sesh or two you can unroll it and vaporise then purer stuff that's built up on the inside.

I think I've told this one before, but we used a car aerial. We were newbies, didn't know any other (open) users and didn't realise that there'd be pure smack on the inside.

One day, I discovered this. That was a mad couple of days.

 

[PenguinWithNapalm]

I think the advantage of having a foil tooter is after a sesh or two you can unroll it and vaporise then purer stuff that's built up on the inside.

i use an empty Bic pen and I can usually get the resin out really well. I just use a flathead screwdriver and twirl it through it. If there’s a lot of resin I can easily get enough resin to make 2 big foils. If I’m really desperate I can get the tiny bit left in there by putting some water in and shaking it up and then boiling it off. Just typical junkie stuff

 

[BadBoy377]

i use an empty Bic pen and I can usually get the resin out really well. I just use a flathead screwdriver and twirl it through it. If there’s a lot of resin I can easily get enough resin to make 2 big foils. If I’m really desperate I can get the tiny bit left in there by putting some water in and shaking it up and then boiling it off. Just typical junkie stuff

I get you. The stuff out the tooter is always worth rescuing.

Yeah typical. Currently trying to come up with the best way to collect the dregs of oil out my vape carts. That stuff is wild when you coat a spliff in it.

 

[PenguinWithNapalm]

I get you. The stuff out the tooter is always worth rescuing.

Yeah typical. Currently trying to come up with the best way to collect the dregs of oil out my vape carts. That stuff is wild when you coat a spliff in it.

Oh yeah I remember when I was a teenager this guy randomly sold me these capsules of hash oil for like 5$ each and I would poke a hole in the top and put it on joints and bowls etc. gets you so ripped. I remember chain smoking a bunch of it with my friend and looking out the window with my vision looking like I took half a tab of acid. Good times. Can you just crack them open?

 

[axe battler]

If you have really good no.3 you can also use a glass meth pipe with a small flame and good technique for bigger wallops of smoke, but safety foil from needle exchanges is best imo. Of course you should be mindful that you are a bit more likely to OD if nitazenes etc are in it.

 

[chippermonk]

I think I've told this one before, but we used a car aerial. We were newbies, didn't know any other (open) users and didn't realise that there'd be pure smack on the inside.

One day, I discovered this. That was a mad couple of days.

We used to use car antennas ( aerial's I assume) to smoke crack. I forgot all about that. Anyhow there was a local epidemic of broken antennas for awhile there in my area. Pretty annoying when it was your own car and you weren't even doing the smoking

 

[axe battler]

Lol, is thag what you'd use as a tooter? You can buy metal straws to avoid the plastic fumes, but making a good tooter from foil is best as you can unfold it and smoke the residue. It's easy and there's videos on YouTube etc. I dont bother with the chiseled end, just a square folded back on itself at all 4 sides, then roll it round a pencil. Use a rizla or bit of tape if you can't stop it from unrolling, but sorta crimping it is usually sufficient.

 

[Psychonauticunt]

When I used to do smack I always hated chasing it on foil. I tried for a while to get the technique right but never quite got the hang of it so I didn't feel like I was wasting a bunch.

In the end I resorted to packing a little bit of H in between my weed and a wad of rolling tobacco just before the tip of a joint. As the joint started to approach the roach, longer drags would start to vaporize the heroin. I found this just as viable and more enjoyable than chasing off tinfoil.

 

[cnnka]

When I used to do smack I always hated chasing it on foil. I tried for a while to get the technique right but never quite got the hang of it so I didn't feel like I was wasting a bunch.

In the end I resorted to packing a little bit of H in between my weed and a wad of rolling tobacco just before the tip of a joint. As the joint started to approach the roach, longer drags would start to vaporize the heroin. I found this just as viable and more enjoyable than chasing off tinfoil.

Have thought about it in the past . Pack a joint full of tobacco and weed and place the H at the back as the joint heated the H should be vaporized. That would work well with cigars if there was a way to put it in as they tend to burn hot I’ve opened a premium cigar in the past and filled it with weed was very nice.

Why there isn’t any smoking H gear paraphernalia ?

 

[BadBoy377]

Have thought about it in the past . Pack a joint full of tobacco and weed and place the H at the back as the joint heated the H should be vaporized. That would work well with cigars if there was a way to put it in as they tend to burn hot I’ve opened a premium cigar in the past and filled it with weed was very nice.

Why there isn’t any smoking H gear paraphernalia ?

You could dissolve it into solution then draw it up in a rig, get a longer needle and inject it into the cigar as you draw the needle out through it leaving the solution in the tobacco. Then leave it somewhere to dry out before smoking.

Might work. Just speculation. Certainly make for a fun experiment.

Heroin cigar anyone?

 

[cnnka]

You could dissolve it into solution then draw it up in a rig, get a longer needle and inject it into the cigar as you draw the needle out through it leaving the solution in the tobacco. Then leave it somewhere to dry out before smoking.

Might work. Just speculation. Certainly make for a fun experiment.

Heroin cigar anyone?

It sounds like a brilliant idea and it’s opening possibilities for other substances also

 

[BadBoy377]

I got the idea from one of my books on magic. It's considered a safer method of using dangerous substances like tropanes from Solanaceous plants.

Spoiler -there's no safe method, just safe-r methods. But make an alcoholic extract of mixed plant matter and soak cigarettes in it, allow them to dry and smoke.

But just don't unless you know what you're doing...