nuggbones313
Greenlighter
- Joined
- Jul 19, 2022
- Messages
- 17
HOTRAILS:The NuggBone Tech
Hotrailing has been my preferred method of vaporization of a multitude of substances but let's get to the point we're talking Ice. After looking at many of the posts on hotrailing and the sheer lack of harm reduction and product preservation, and well good old tweaker ingenuity I felt i should share my 10 years of perfecting my technique.
So let's get into it first things first this isn't for the hurry up smoker, the quick hitter in a bathroom type technique. This is for grown-ups who have a setting they can do this in and not worry about the amount of smoke which will be massive in comparison to anything else. Now we need a surface and this is one thing that never got mentioned ever if you do a hotrail on a desk a table top made from wood or fake wood pressboard whatever or an acrylic desk your going to regret it. The railer is going to not only vape the meth but also the layer of clear coating on almost every table or desk ever made. So my suggestion walk to your kitchen open the microwave take the clear glass plate that spins out and wash it off dry it off and using a torch preferred is going to be q culinary torch or dabs torch, why you ask because the small little pocket torches work but very inefficient, and heating area is very small the flame doesn't cut it in the big leagues.
So far we've gotten a non chemically coated surface (glass plate) and a culinary torch or dabs torch, next the railer to be heated, some folks say use a broke bowl stem or straight glass tube but thats wasteful. Chillums for single hits that look like a crack stem but have a smaller diameter hole about 1 inch down. This is a game changer but only the beginning because now it gets tweaked, to this OG glass chilling 5in is better then 4in im going to heat the opposite side farthest from the small inner tube hole side. No your not doing anything yet this is then heated enough to push through the lid of an empty prescription pill bottle. Now pull it out and get then plastic off of the chillim and get the duct tape, not moving tape, not electric tape, duct tape. The hole u just made your gonna wrap an inch maybe two of the long side of chillum. This is to help seal up the hole we made in the lid. Take the chillum push the longer duct taped side snuggle into the hole and then proceed to use the duct tape on the outside to make it sealed up but don't seal it all the way so you can't open the bottle when u put the lid on with the chillum sticking out make sure u tape all around the lid the child prevention causes gaps make sure u cover these but not tape your lid onto the bottle it should screw on n off and the chillum should be solid 3-4inch and make sure to have the small hole on that side thats the tip side not on the inside.
Using disposable hookah tubes them 5$ plastic ones throw out that long plastic thingy keep the smaller mouth piece part and on the bottom of your nectar collector (rx bottle with chillum) heat a spot up and use the hard plastic mouth piece usually 4 - 5 inch hard plastic to punch through the bottom. Pull it out and clean the melted plastic, then duct tape wrap your other open end of the hookah tube this is to get a air tight seal when u push it in the bottom of the bottle then tape the outside sealing it up. Now words of advice do not use a super small bottle for this reason is the chillum and the hookah tube inside the rx bottle shouldn't be making a connection. I've learned to angle the chillum one way the hookah the opposite way inside the rx bottle. Also making a type of breathable filter that doesn't burn I started using foil lightly rolled into a tube or even paper towel in the hookah tube prior to the placement of it this is not necessary but trying to perfect it you'll do this type of thing.
===[___]======> basic shape of it.
Now you got this hookah tube with the mouth piece that's nice for the nose, the chillum to get the best surface to product ratio and home made nectar collector to not waste any unvaped product. (If your old like me in this world your recycle bin I call it will shock u after a week or two) you rookies think your good to go ? Well let's talk Temps cause they are very fucking important here guys can't stress enough everyone says red hot this and 2 - 5 min torching your railer. That's not always a good idea, meth is vaporized and then burned and degraded. Yes it must be hot hot hot, but with the larger torches this will way over heat the glass and even 3 feet of tube and a collector don't cool down over done nasty smelling tasting burned up shit. Blowtorch the railer from tip to past the inner small hole focus on the borosilicate at that bottle neck it's thicker and needs extra and then 1-2inch up as well u should be able to turn part of the tip red then move up the tube past the small hole and when about 2 inches is heated then its ready for action. Take out a half gram finely crush I use paper and the 100g weight for my scale and roll it over the paper that's on the tina thats on the Glass tray. Everyone say line siz3 this and that well in this version it doesn't matter. Big finger wide, foot long lines or 3 feet long pinner lines. Shove the mouthpiece in your nose it should fit snuggly enough to not fall out and heat up the railer and blow all the air out your mouth, now this is definitely art do not just put the hot ass tip flat on the line I angle it like it's more gonna scoop it and then here's the trick breath in slow as u can and move the tube quickly if done correctly ull have a headbangijg mind fucking lungs hurting dense thick cloud that will take ur breath away. Now don't stop keep the tip pointed down and hit it with the torch while tipping it up and down and watch the shit as it slides up and down the tube I twist my wrist making it spin at the same time and you will see the what I'm talking about.
Okay to wrap it up, remember how we didn't seal the lid with tape to the bottle itself allowing it to still open and close, go ahead open it up after doing rails all night.
Also if you get the plastic hookah tubes like for 5 or 6 $ off Amazon the mouthpiece /nosepiece makes for add ons. Like shoving it into a water percolate bong and then running a second hookah tube from the mouth piece of bong to your face. Using duct tape again so you enlarge the tubing and seal it to the bong. That's if you want to cool and add flavors to the ice. Now this can tweaked to your own desire, but I've been trying for years geekin n tweaking on the design of it and honestly this is simple cheap and fucking efficient. You just gotta get the torch right when using this and easy way is not go and do the line but do a bump of the line to make sure ur not over or under tempted. You will get some crystallized product on the very tip if u do huge lines but that's fine its already inside just heat and tip facing up. That's another thing u gotta move that fucker when u got that line up in it tip it up and down. Becarful it can drip and fling out if you wild with it.
Warning don't do .5 of meth if that's not your usual amount I'm just using myself amount. Also this will produce an immensely large amount of clouds and air purifiers are the remedy for that. Spend the few bucks on a decent one, stay away from desk ones that run 20 -30, you'll end up not being happy. Use discounts grab a 40+ after discount range for us hotel hotrailers(no smoking fines ever).
So we did the setting, the how to make it with easily found things, and even included safety and environmental safety tips. If you must see one in action hit my box up there is video of it and how amazing it works. Have fun hit the clouds, stay safe and keep it geekin and tweaking. -Nuggbones
Hotrailing has been my preferred method of vaporization of a multitude of substances but let's get to the point we're talking Ice. After looking at many of the posts on hotrailing and the sheer lack of harm reduction and product preservation, and well good old tweaker ingenuity I felt i should share my 10 years of perfecting my technique.
So let's get into it first things first this isn't for the hurry up smoker, the quick hitter in a bathroom type technique. This is for grown-ups who have a setting they can do this in and not worry about the amount of smoke which will be massive in comparison to anything else. Now we need a surface and this is one thing that never got mentioned ever if you do a hotrail on a desk a table top made from wood or fake wood pressboard whatever or an acrylic desk your going to regret it. The railer is going to not only vape the meth but also the layer of clear coating on almost every table or desk ever made. So my suggestion walk to your kitchen open the microwave take the clear glass plate that spins out and wash it off dry it off and using a torch preferred is going to be q culinary torch or dabs torch, why you ask because the small little pocket torches work but very inefficient, and heating area is very small the flame doesn't cut it in the big leagues.
So far we've gotten a non chemically coated surface (glass plate) and a culinary torch or dabs torch, next the railer to be heated, some folks say use a broke bowl stem or straight glass tube but thats wasteful. Chillums for single hits that look like a crack stem but have a smaller diameter hole about 1 inch down. This is a game changer but only the beginning because now it gets tweaked, to this OG glass chilling 5in is better then 4in im going to heat the opposite side farthest from the small inner tube hole side. No your not doing anything yet this is then heated enough to push through the lid of an empty prescription pill bottle. Now pull it out and get then plastic off of the chillim and get the duct tape, not moving tape, not electric tape, duct tape. The hole u just made your gonna wrap an inch maybe two of the long side of chillum. This is to help seal up the hole we made in the lid. Take the chillum push the longer duct taped side snuggle into the hole and then proceed to use the duct tape on the outside to make it sealed up but don't seal it all the way so you can't open the bottle when u put the lid on with the chillum sticking out make sure u tape all around the lid the child prevention causes gaps make sure u cover these but not tape your lid onto the bottle it should screw on n off and the chillum should be solid 3-4inch and make sure to have the small hole on that side thats the tip side not on the inside.
Using disposable hookah tubes them 5$ plastic ones throw out that long plastic thingy keep the smaller mouth piece part and on the bottom of your nectar collector (rx bottle with chillum) heat a spot up and use the hard plastic mouth piece usually 4 - 5 inch hard plastic to punch through the bottom. Pull it out and clean the melted plastic, then duct tape wrap your other open end of the hookah tube this is to get a air tight seal when u push it in the bottom of the bottle then tape the outside sealing it up. Now words of advice do not use a super small bottle for this reason is the chillum and the hookah tube inside the rx bottle shouldn't be making a connection. I've learned to angle the chillum one way the hookah the opposite way inside the rx bottle. Also making a type of breathable filter that doesn't burn I started using foil lightly rolled into a tube or even paper towel in the hookah tube prior to the placement of it this is not necessary but trying to perfect it you'll do this type of thing.
===[___]======> basic shape of it.
Now you got this hookah tube with the mouth piece that's nice for the nose, the chillum to get the best surface to product ratio and home made nectar collector to not waste any unvaped product. (If your old like me in this world your recycle bin I call it will shock u after a week or two) you rookies think your good to go ? Well let's talk Temps cause they are very fucking important here guys can't stress enough everyone says red hot this and 2 - 5 min torching your railer. That's not always a good idea, meth is vaporized and then burned and degraded. Yes it must be hot hot hot, but with the larger torches this will way over heat the glass and even 3 feet of tube and a collector don't cool down over done nasty smelling tasting burned up shit. Blowtorch the railer from tip to past the inner small hole focus on the borosilicate at that bottle neck it's thicker and needs extra and then 1-2inch up as well u should be able to turn part of the tip red then move up the tube past the small hole and when about 2 inches is heated then its ready for action. Take out a half gram finely crush I use paper and the 100g weight for my scale and roll it over the paper that's on the tina thats on the Glass tray. Everyone say line siz3 this and that well in this version it doesn't matter. Big finger wide, foot long lines or 3 feet long pinner lines. Shove the mouthpiece in your nose it should fit snuggly enough to not fall out and heat up the railer and blow all the air out your mouth, now this is definitely art do not just put the hot ass tip flat on the line I angle it like it's more gonna scoop it and then here's the trick breath in slow as u can and move the tube quickly if done correctly ull have a headbangijg mind fucking lungs hurting dense thick cloud that will take ur breath away. Now don't stop keep the tip pointed down and hit it with the torch while tipping it up and down and watch the shit as it slides up and down the tube I twist my wrist making it spin at the same time and you will see the what I'm talking about.
Okay to wrap it up, remember how we didn't seal the lid with tape to the bottle itself allowing it to still open and close, go ahead open it up after doing rails all night.
Also if you get the plastic hookah tubes like for 5 or 6 $ off Amazon the mouthpiece /nosepiece makes for add ons. Like shoving it into a water percolate bong and then running a second hookah tube from the mouth piece of bong to your face. Using duct tape again so you enlarge the tubing and seal it to the bong. That's if you want to cool and add flavors to the ice. Now this can tweaked to your own desire, but I've been trying for years geekin n tweaking on the design of it and honestly this is simple cheap and fucking efficient. You just gotta get the torch right when using this and easy way is not go and do the line but do a bump of the line to make sure ur not over or under tempted. You will get some crystallized product on the very tip if u do huge lines but that's fine its already inside just heat and tip facing up. That's another thing u gotta move that fucker when u got that line up in it tip it up and down. Becarful it can drip and fling out if you wild with it.
Warning don't do .5 of meth if that's not your usual amount I'm just using myself amount. Also this will produce an immensely large amount of clouds and air purifiers are the remedy for that. Spend the few bucks on a decent one, stay away from desk ones that run 20 -30, you'll end up not being happy. Use discounts grab a 40+ after discount range for us hotel hotrailers(no smoking fines ever).
So we did the setting, the how to make it with easily found things, and even included safety and environmental safety tips. If you must see one in action hit my box up there is video of it and how amazing it works. Have fun hit the clouds, stay safe and keep it geekin and tweaking. -Nuggbones
