• 💊 OTHER DRUGS 💊 Welcome Guest
    Posting Rules Bluelight Rules
    Notable Threads 1 Notable Threads 2
    Dangerous Combos Addiction Support
    Emergency Services Benzo Guide v.1
    Addiction Stories Scary Case Studies
    Biology, Pharmacology & Drugs 101
  • Select Your Topic Then Scroll Down
    Alcohol Bupe Benzos
    Cocaine Heroin Opioids
    RCs Stimulants Misc
    Harm Reduction All Topics Gabapentinoids
    Tired of your habit? Struggling to cope?
    Want to regain control or get sober?
    Visit our Recovery Support Forums

Benzos Etizolam Mega Thread v1

Status
Not open for further replies.
J.Wallace said:
Considering ordering 40mg to test it out. I'd be receiving it as powder not tablets, so I'm wondering how I could properly measure this out. I usually use my .00mg scale for MXE. I have a high tolerance, so the extra .0 is not an issue. However, this stuff is active as such a low mg range, I'm wondering what to do. I can't make a liquid solution either, for various reasons including house hold members and family being around, wouldn't be able to acquire the required materials. Besides that, I simply have no interest in making it into liquid doses.

How should I dose this? Ideally, I'd like to make doses of 1 to 2mg each so I can easily take when I want. If all I have is pure powder, with such a small tiny grain being a standard dose, what would be a good way to make them easy to take? I was thinking capsules, mixing it with sugar to fill up the cap then swallowing when I wanted. It's not the greatest idea, but it's a thought.
Click to expand...

here's an idea, buy an accurate .000mg scale.
 
pbuilder said:
here's an idea, buy an accurate .000mg scale.
Click to expand...

Seriously, gonna go with that BS response? Obviously I know buying a .000mg scale would be ideal. That's not what I'm asking though.

Very helpful advice, "Buy a scale". I can already see the "If you can afford 40mg of Etizolam, you can afford a .000mg scale" posts coming through. Forget I asked.
 
J.Wallace said:
Seriously, gonna go with that BS response? Obviously I know buying a .000mg scale would be ideal. That's not what I'm asking though.

Very helpful advice, "Buy a scale". I can already see the "If you can afford 40mg of Etizolam, you can afford a .000mg scale" posts coming through. Forget I asked.
Click to expand...

You don't realize how incredibly dangerous it is to eyeball a substance that is effective at doses as low as .5mg do you. Go ahead, eyeball it. Black out after forgetting how much you took from your "1mg" eyeball doses, and wind up eating all the powder in a blackened out state. Then, do something incredibly stupid and feel like a fucking moron the next day. Seriously, you don't want to do the proper method for liquid dosing, so what the hell can people tell you to do without a scale as well?

Start with 1 or 2 GRAINS at a time then.
 
pbuilder said:
You don't realize how incredibly dangerous it is to eyeball a substance that is effective at doses as low as .5mg do you. Go ahead, eyeball it. Black out after forgetting how much you took from your "1mg" eyeball doses, and wind up eating all the powder in a blackened out state. Then, do something incredibly stupid and feel like a fucking moron the next day. Seriously, you don't want to do the proper method for liquid dosing, so what the hell can people tell you to do without a scale as well?

Start with 1 or 2 GRAINS at a time then.
Click to expand...

Don't patronize me. I do in fact know how stupid it is to try and eyeball a substance that is active at such a low dose. You are talking to a fool who eyeballed a dose of 2c-P and ended up overdosing. So, again, I do in fact know how stupid it is and I know a scale is much needed. I understand you may be trying to help with your "Get a scale" response, it's just I already know this and it's not what I asked. It's not that I don't want to use liquid dosing...I just simply prefer dealing with powder. It's a personal preference.

As for dividing it into 40 piles, I think it'd be more effective if I use my .00mg scale, measure out four 10mg piles, then each 10mg pile into 5 separate piles, which should leave me with 2mg each. It's not ideal but it'll have to do.
 
^that may work, and was what i was joshfully implying Lol... but yeah even the etizolam blister packs, takes 2 mg to really "feel it" with no benzo tolerance, so seperating .10's into 1/4's would even be a good dose(2.5mg), but if its even slightly cut, you may need more. just take 2-2.5mg and give it an hour and you should feel it pretty good. i only have a .00 scale as well, and that is how i would do it, if i ordered powder.
 
J.Wallace said:
Considering ordering 40mg to test it out. I'd be receiving it as powder not tablets, so I'm wondering how I could properly measure this out. I usually use my .00mg scale for MXE. I have a high tolerance, so the extra .0 is not an issue. However, this stuff is active as such a low mg range, I'm wondering what to do. I can't make a liquid solution either, for various reasons including house hold members and family being around, wouldn't be able to acquire the required materials. Besides that, I simply have no interest in making it into liquid doses.

How should I dose this? Ideally, I'd like to make doses of 1 to 2mg each so I can easily take when I want. If all I have is pure powder, with such a small tiny grain being a standard dose, what would be a good way to make them easy to take? I was thinking capsules, mixing it with sugar to fill up the cap then swallowing when I wanted. It's not the greatest idea, but it's a thought.
Click to expand...

I dont have an answer to your question but why would you add sugar just to fill up the cap? Just put the etiz in the cap and leave the rest empty. I dont see why you'd want to fill it til its packed?
 
intelligentmind said:
I dont have an answer to your question but why would you add sugar just to fill up the cap? Just put the etiz in the cap and leave the rest empty. I dont see why you'd want to fill it til its packed?
Click to expand...

Eh, no particular reason. Part of me thinks the sugar might be a nice addition to the supposed Benzo-type high it gives, though in retrospect I doubt it'd make much of a difference. I guess more than anything just to make the capsules aesthetically pleasing to my eyes.
 
J. Wallace: I don't understand why you can't make a solution. Buy some Propylenglycole, put the 40mgs in 40ml or so. Heat a little up and stir: done. This is nothing which must be done in a kitchen. Or is your family following every step you are doing?

This is the easiest and safest way to dose Etizolam powder and your reasoning is invalid.
 
My friend, even if you have a benzo tolerance and all, that way of measuring is just messed up and could easily lead to accidents. In the end it's about the effect the drug gives, just dissolve it into a 1ml=1mg solution and dose some in a glass of soda and you'll be safe and less thirsty. What more do you want?
 
J.Wallace said:
Don't patronize me. I do in fact know how stupid it is to try and eyeball a substance that is active at such a low dose. You are talking to a fool who eyeballed a dose of 2c-P and ended up overdosing. So, again, I do in fact know how stupid it is and I know a scale is much needed. I understand you may be trying to help with your "Get a scale" response, it's just I already know this and it's not what I asked. It's not that I don't want to use liquid dosing...I just simply prefer dealing with powder. It's a personal preference.

As for dividing it into 40 piles, I think it'd be more effective if I use my .00mg scale, measure out four 10mg piles, then each 10mg pile into 5 separate piles, which should leave me with 2mg each. It's not ideal but it'll have to do.
Click to expand...

If you know it's stupid and you overdosed once before, why chance it again?

Go to Amazon, you can pick one up for pretty cheap and grab some non-stick plastic milligram scoops as well to scoop of the powder.
 
-Guido- said:
If you know it's stupid and you overdosed once before, why chance it again?

Go to Amazon, you can pick one up for pretty cheap and grab some non-stick plastic milligram scoops as well to scoop of the powder.
Click to expand...

Lol exactly my thoughts. Oh how ironic that he doesn't want to be patronized yet he is on the right track to making the same mistake twice. You should know better, this is an HR forum, and without a scale or a proper liquid solution, there is not a magical way for you to accurately dose, so don't get upset with me for pointing that out lol.
 
Well I just ordered 15 of the 2mg Etizolam pellets, and they are rock solid with a really good press, expensive. But I have taken like 5 or 6 of them, yes (12mg of Etizolam) to be correct. And I barely feel any effects, and it has been over an hour and a half. I have a benzo tolerance, but it should be much lower since I am on a Diazepam taper down to 15-20mg/day. So you think I should be able to feel the Etizolam?
Especially if I have anxiety.. I mean, whats up with these pellets? I have had better effects when I was on a much higher dose of Opiates and the 0.5mg Etizolam Mcleouds Pharma blistered from India were stronger than these. These pellets that are made in the UK are not up to par with the etilaam or any blistered Etizolam for that matter IMO.

Can anyone comment on these red 2mg pellets going around?

Thanks in Advance.
 
Can't comment on the 2mg Red pellets. However, if they are pressed by the same lab as the rock solid 1mg ones, they can be very hit and miss. Waying 1mg or 2mg accurately is difficult.

Can't comment on the equipment used, as I wouldn't know, but a little research tells me that you're looking at ~4,000 dollars for a micro-scale.

I would hope a lab producing these in the 1000's to use something like this, but it's a far cry (IMHO) from a manufacturer Like Intas for example. I have always had consistent results from Etilaam brand Eti's
 
are there any markings at all on them? the only red/pinky coloured ones ive seen seem to be hit and miss. because i had ran out of the intas ones i tried my best to cut one up into 4 parts so i could hopefully ingest 0.5mg. i felt a bit awkward, sedated but slightly anxious too, also for a period of time my pupils went bigger, i suspect this wasnt etizolam or was a mix of something. but whatever i had was definitely active.
 
Dont understand how the scoops would work. Different substances have a different mass @ the same weight. For example ethylenidate seems to weigh a lot @ tiny doses, whereas ah7921 doesnt weigh much @ doses that look big.

I guess @ the 1mg level there's not too much scope for the scoops to be out. They must be tiny little dinky things.
 
why the fuck do people buy these massively under dosed '2mg' tabs.

Powder is cheaper, and if you want tabs Pharm grand etilaams are around 35p each!
 
FlippingTop said:
why the fuck do people buy these massively under dosed '2mg' tabs.

Powder is cheaper, and if you want tabs Pharm grand etilaams are around 35p each!
Click to expand...

I suppose it's good enough for the people who use etizolam incidentally. It wasn't up untill I used it a few times a month till I decided to switch to the powder. Which does save you loads indeed. Me and my friends tend to use it every weekend and dose around 3 mg.
Tolerance doens't seem to build that quickly this way, 3mg is still more then enough to completely calm down after a night of speed without inducing sleep right away.
 
Etizolam powder that is active @ 0.5 mg could be a recipe for disaster for some people. Not just naive beginners, but for people with addictive personalities, or fiending tendencies, or anyone who isnt extremely careful and disciplined.

My initial gut instinct was to stay away from the stuff, due to fearing a disaster with the stuff. Then later on i forgot this initial instinct and a little while ago, due to cost saving reasons, i started asking around about the stuff. Im glad someone spoke sense to me, and advised me against getting the stuff. Im sure things would be worse for me than they are now, if i had purchased some of that powder a few weeks ago.
 
Status
Not open for further replies.
Top