Benzos Etizolam and solutions and your setups please help

[mtop2036]

From what I've been reading is that propylene glycol is the best to dissolve etizolam powder into.


Is There diffrent kinds of pg solution? I Know I want food-grade/pharmacutical.

And how do you do it? anyone have a guide?

say I put 100ml of solution into glass vial and 100mg to etizolam and shake and shake and use luke warm water to help dissolve an thats it?

Anyone know how much etizolam 1ml can handle?

I have 30ml viles. So is it possile to fit 100mg per vial and still be able to dose at 1 mg. if so how much would it be? or even 100mg in 25ml so the bottle isnt to the rim.

and after my solution is made and everything can I add flavor to it? im sure there are plently flavoring products since hearing pg tastes like shit. I;ve seen flavored pg but I dont want that I want food grade. And would the flavoring break the mix>



Also whats better cobalt or amber glass vials?

ANd is it better to store the powder or put all into solution. WHich one evaporates first/ loses potency faser.

Any tips out of anyone who has etizolam would be great.

I've used 1000s of the etizest pills but first time with powder so please and tips or tricks.

and what eqiptment do you guys use? vials jars? no leak vials? scales? I'm looking at buying the pack of 100 antistatic microscoops just for transfers.

So im gonna gte the scooops, scale that reads .001 PG solution. some kind of oral srygine to measure liquid. and possibly some metal tools.


What are your set ups thanks.

 

[mtop2036]

anyone? i really need some answers I know its been covered alot but i neeed help

 

[Hecticus]

You've so many obvious questions which i think you already know. Weigh Etiz with MG SCALE, put in solution, agitate solution until dissolved, use 1ml syringes to measure dosages and start with .5mg to confirm what you have is Etizolam. Amber vials are not essential, do not get impatient and heat to dissolve and don't put solution in the fridge or freezer as it may come out of the solution. Be creative and becareful not to accidently consume while preparing.

Most of this could have been researched.

 

[mtop2036]

Sorry yes ive researched allready but with something so potent I want to be safe.

The question I cant find is how many Mg can 1 ml hold?

Can I put 100mg into 10ml?

 

[socio]

My success dissolving etiz in PG and Isopropyl has been limited. However, Lemon Juice works well. This is only a good "solution" in the short term, as it is likely to "go bad" (mold, other nasty bugs) eventually. Until now, heating it with a 1mg/1ml ratio of lemon juice (actually 90% lemon juice, 10% isopropyl) to about 160' Farenheit with agitation in a closed glass flask (to prevent evaporation) in double-boiler over the course of an hour or two has worked very effectively.
In the latest attempt, however, only a majority of solution dissolved. In fact, a few solids precipitated out and fell to the bottom.
Any advice? They might be cut that is melting together, but I rather doubt it, and in any case, I can't have a solution that is not uniform...

 

[mtop2036]

My success dissolving etiz in PG and Isopropyl has been limited. However, Lemon Juice works well. This is only a good "solution" in the short term, as it is likely to "go bad" (mold, other nasty bugs) eventually. Until now, heating it with a 1mg/1ml ratio of lemon juice (actually 90% lemon juice, 10% isopropyl) to about 160' Farenheit with agitation in a closed glass flask (to prevent evaporation) in double-boiler over the course of an hour or two has worked very effectively.
In the latest attempt, however, only a majority of solution dissolved. In fact, a few solids precipitated out and fell to the bottom.
Any advice? They might be cut that is melting together, but I rather doubt it, and in any case, I can't have a solution that is not uniform...

Lemon juice?

Then whats with all the reports who say to use pg. Im not knocking your method but i've read alot of about people using PG.

I really just want to know if 100mg will go into 10ml pg evenly.

And also can I flavor it? Obviously people have flavored e cigs but I bought food grade pg. Do they use the same food gradein e cigs.

specfically i bought http://www.amazon.com/gp/product/B005PZBRUC/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1


So many threads on people using pg but not any with the info I need.

thanks guys

 

[socio]

Yeah, like I said, PG has been causing problems for me. 100 mg will go into 10ml (in theory, in my case it's been problematic) and that's the usual amount people use for solutions. Multiply to your amount of etiz, of course

 

[MBRC]

I make my friends etiz vials once a week. So ive made quite a few. Ive only ever used pg isopropyl and.vodka. i like pg best. I have 15ml vials but it doesnt matter the size as long as you do the math. I personally put 10ml pg in my vial put.in microwave for 5 sec. Increments avg. 10 secs. Total to help disolve. I weigh out 100mg in a business card folded in half and then use something to help dump imto vial. Usually with shaking it dissolves in 10min. But the last few times ive been turning my desklamp facing upwards and setting my vial on or next to bulb. And its been dissolving alot faster and better. I suggest not using water as it can get contaminated by bacteria. Thats y if im out pg ill use vodka or iso if desperate.
..easy peasy also u can use VG

Ive made several vials ALWAYS using heat. Microwave usually. I usually put the chem in after its heated but i have heated vials with the chemical in solution already and was fine. Doc phenaz etiz moxy nbomes. None have ever degraded. Just dont heat too hot. Like warm coffee is the temp.i shoot for

 

[mtop2036]

Well ive done 100mg10ml with mostly good results. Ive heard a lot of people saying 1to1 is best. But I don't wanna be Downing z30ml of pg. So im gonna do 1000mg in500ml pg. Would this 100% dissolve for .5ml1mg? Think it could work without heat if not plan if to heat pg to about 40c(not to hot? Not to cold?) Then adds etizest and stir and shake.

 

[lazord00d]

I've had the best luck (I mix at 10mg/ml) in a mixture of 70% PG and 30% everclear. It's my preferred method, it allows for easy manipulation of known amounts with a variety of small lab gear. No heat other than a hand warmer needed (and not even that most of the time if you wait a day before use).