• Select Your Topic Then Scroll Down
    Alcohol Bupe Benzos
    Cocaine Heroin Opioids
    RCs Stimulants Misc
    Harm Reduction All Topics Gabapentinoids
    Tired of your habit? Struggling to cope?
    Want to regain control or get sober?
    Visit our Recovery Support Forums

Benzos Buying Etizolam Powder First Time Is Lemon Juice Good For Liquid Dosing it?

Thomas29

Bluelighter
Joined
Oct 25, 2010
Messages
1,505
Hi I Plan to Buy a 250MG Batch of Etizolam Powder And A MG Scale from Amazon.com if anyone can Recommend A Good Scale that would Help A Lot.

My Question is would 30mg Weighed on My Scale be Large enough to Not Fluctuate to Different Weights By Much? Then if I Put it in with 30ml Of Pure Lemon Juice would I be able to get 1mg Per 1Ml and LEMON Juice so I can just Straight Up dRINK it but if that wont work I Guess I will Buy some Propelyne Glycol or something. Anyways some Help would be Greatly Appreciated ALSO I HAVE A BENZO TOLERANCE I Use 1mg Clonazepam Per Day or 40-45 MG Temazepam.
 
Just get order some propylene glycol when you order your scale off of amazon. I wouldn't even try using lemon juice as I have a hard enough time getting it to dissolve in P.G. I hear it dissolves in high proof ethanol fairly easy but havent tried it myself. Even the cheapest scale should register 30mgs no problem, just make sure to check your calibration weight every time. If you feel like being extra cautious you can weigh the same pile several times.

Etiz does not dissolve as easy as similar compounds IME so be patient. Getting the P.G. warm beforehand helps a lot.
 
Last edited:
I Heard that there are some Risks Involved with Ingesting Propylene Glycol But Since I would Only be Having a ML or 2 Of it does it mean that would be SAFE?


Or people Say to Put it On a Blotter Like Acid what Does that Mean Like literally take a Rolling Paper or PRINTER paper peace and let it dry out on it and then eat that? Could I just Put a ml or whatever Dose I want onto a Cracker and Wait a Few Hours and then Eat it so all the Propylene Glycol is Evaporated Leaving the Eizolam on the Cracker Or Small Ripped Peace Of Paper Lol.
 
Im making my first solution as well.

I want to put 100mg in 10ml pg. Ive made a dig stored to help make. Im took a fan and took the faceplate off so the blades are exposed. Then going to face it starlight up in the air so its aimed at my ceiling. Then I will be securing the bottle on the center piece that hold the fan blades and let it rip. Ive tested it with water in the bottle and there's a tornado going on It.

This should help mix it a lot better right? A lot of people say over night but what about with my method.

Lastly people have been saying its not possibly for a 10mg 1ml solution. But ive seen many vendors sell it at that dilution. So it has to be possible.


Id love to hear anyones experience with making solutions and their dilution.

Please and thanks.

Wince the powder is so potent I don't want to mess up on any step.


Op as for scales I just bought the gemini20 on amazon. You have to calibrate it every time for best results. But with the 10g calibration weight it comes with its always in 1 to 3 Mg.
 
^I have a rough time getting 2mgs of pure etiz in 1ml of P.G., I really can't see you getting 10mg per ml. I always assumed that the vendors selling those types of concentrations are using ethanol but I could be totally wrong.
 
I also Read that After One Month the Liquid Solution will be COMPLETELY DEGRADED obviously NO SUNLIGHT and I Don't Know if Keeping it at Normal Room Temp or Fridge is Best and Obviously a Dry Enviorment and I would Assume it will Start to Degrade in one week maybe two weeks? Can someone with Experience Shed Some Light on this Question Of Mine???
 
etizolam is stable in ethanol or glycol solutions.

store it at room temperature in a dark spot if you're concerned.
 
^I have a quick question while you're here. A few months ago magikalcat777 said there was a chance that diclazepam could possibly absorb into a plastic container as diazepam does the same. Is that right?
 
^I have a rough time getting 2mgs of pure etiz in 1ml of P.G., I really can't see you getting 10mg per ml. I always assumed that the vendors selling those types of concentrations are using ethanol but I could be totally wrong.

What was your process? Did you use heat? And how long did you mix?

I asked a vendor who said he used a warm water bath and let it sot over night.

Can anyone else chime in on this? What dilutions have you successfully made?
 
Just get order some propylene glycol when you order your scale off of amazon. I wouldn't even try using lemon juice as I have a hard enough time getting it to dissolve in P.G. I hear it dissolves in high proof ethanol fairly easy but havent tried it myself. Even the cheapest scale should register 30mgs no problem, just make sure to check your calibration weight every time. If you feel like being extra cautious you can weigh the same pile several times.

Etiz does not dissolve as easy as similar compounds IME so be patient. Getting the P.G. warm beforehand helps a lot.

How warm and how did you heat it? What dilution did you come out with?
 
I make a warm bath using a kurieg brewer. It is perfect for getting the container hot but not too hot. The highest ratio I've made was 2mg/mL and it takes a while and a lot of hot water to get it all to dissolve.
 
Can confirm it dissolves very easily into Everclear (95%). I was able to saturate up to a 2:1 ratio (eti:ethanol) as in 20mg/ml. Took about 30 mins to fully dissolve and heated it slightly to around 90F.
 
I have a quick question while you're here. A few months ago magikalcat777 said there was a chance that diclazepam could possibly absorb into a plastic container as diazepam does the same. Is that right?

Benzos won't absorb into plastic appreciably unless you're storing them for years on end. Fick's law of diffusion sez if you keep the concentration of benzos in a solution relatively low then they won't diffuse at appreciable levels.

I also have a suspicion that the water content of propylene glycol can cause it to lose power as a solvent. That is, if you have wet PG it won't dissolve etizolam very well at all.
 
I am so confused. I just had a chat with a fellow who makes a lot of etizolam solution using pg. He does 10mg/1ml no heat. but uses a magnetic stirer. I have made ghetto magnetic stirer and he believes it will work just fine. He leaves his on for a few hours.

Another person from a pm has said "I just heat a bowl of water up for 2-3 minutes and dip it in for a little bit then shake the bottle in a towel so I don't drop it from being slippery. You can do that 3-5 times and the solution is ready to go.

100mg will go into 10ml of PG.

The process takes 15-30 min.

10mg will go into 1ml. You'll use a 1ml oral syringe and every 0.1 thats sucked up will equal 1mg of etizolam."


and ive asked vendors that say they also have made 10mg1ml.

Can some others please chime in, I dont want to ruin 100mg :( or give me a pm anything
 
What about this don't you understand?

Well flawedbydesign says in a few posts up hes had trouble getting 2mg into 1ml. As have others. But id like 10mg into 1ml which also some say works.

If dosnt work for me I can add more pg but my bottles are only 30ml. I could try a larger bottle who h would be plastic instead of glass and might not fit on my ghetto maganetic stirer.

Any input please.
 
So then try to dissolve a small amount before you commit all your etizolam to it.

Like I mentioned before, a likely cause of etizolam having low solubility in PG is the presence of water; if you have more than a little bit of water in your PG (read the specification sheet for the stuff you bought, store it tightly sealed, etc) the etiz won't dissolve.
 
Top