• 💊 OTHER DRUGS 💊 Welcome Guest
    Posting Rules Bluelight Rules
    Notable Threads 1 Notable Threads 2
    Dangerous Combos Addiction Support
    Emergency Services Benzo Guide v.1
    Addiction Stories Scary Case Studies
    Biology, Pharmacology & Drugs 101
  • Select Your Topic Then Scroll Down
    Alcohol Bupe Benzos
    Cocaine Heroin Opioids
    RCs Stimulants Misc
    Harm Reduction All Topics Gabapentinoids
    Tired of your habit? Struggling to cope?
    Want to regain control or get sober?
    Visit our Recovery Support Forums

Harm Reduction ⫸Official Plugging/Rectal Administration Megathread⫷

"for 40 tabs I would do 30-40ml of water, dissolve 20 tabs into 30 mls and filter, use the same filtered water and add 20 more tabs into them and filter as usual

2 washes of 20 tabs each with the water recycled. total of 40 tabs used and 30 ml of water used, makes it easier to plug.

if you want you can add 10 ml of water to the used filters and get the "rest" out" or save a bunch of em and do a cwe on em to get a decent dose or even rinse them and use the water as the base for the next time you do a CWE

I don't know why people use so much water when the solubility of codeine is so high, all you add is more caffeine and that kills the high after a bit."

Omg that's brilliant, why haven't I thought of this x.x

I was only concerned that the amount of water was not enough to handle 40 pills at a time, I wasn't concerned that 300+mg of codeine would not fit in that much water.

You mentioned more water = more caffeine, does this mean that I'll get less caffeine per dose by using your method? This could be beneficial for both plugging and oral use for me if that's truly the case cause while I am caffeine insensitive (likely due to the amount taken from doing the cwe) i do still notice it's edginess which does not help the high nor the pain I'm attempting to eliminate by taking it.
 
tricomb said:
I prefer standard 5 or 10mL oral syringes with the Luer Taper / Slip tip
Click to expand...
Where does one acquire a luer taper?.. I get my oral syringes from the CVS... But I would find it weird to ask them if they had a luer taper as well (looks like something needed for needle use)
 
Imam_13 posted:
"I have 8mg dilaudid (they aren't the traditional triangular dilaudids these are circular ones with PMS on one side and "-8-" on the otherside, I believe them to be instant release. Anyways I usually take the full 8mg dilaudid break it up as fine as possible, then add between 3-5ml of water to all the powder mix in shot glass then draw up the mixture and administer it. I find that the pill isn't fully dissolved for what ever reason. When I look at the water in the syringe there are little pieces floating around and if I hold the syringe upside down little pieces will float the the tip of the needle. Is there anyway to ensure that more will get dissolved? Or ways to make more get dissolved so that its more of a milky smooth mixture instead of a kinda chunky bits floating around mixture?"

The absolute thing happens to me, I use D2 IR brand name and while shaking the syringe it looks completley dissolved but leaving it 2min the powder rises to the top of the syringe.

Can anyone elaborate on this?
 
I'm not sure exactly what kind of drugs that is you speak of, but if it's simply a crushed pill, the partials you are seeing are likely just binders/fillers. However it does seem odd that you mention that they float rather than sink.

This is just a theory and not fact.
 
this may be a silly question but i would like to know some variations on this ROA
what would happen if one were to place a stim powder directly in the anus/rectum (i.e not in a solution/liquid form)
also would soaking a cotton ball in a solution of a stim, then putting it in the bumhole work or do anything
 
i plugged seroquel once (answered this on another forum, too, though I can't recall which thread). Anyway THAT felt more to me like a high dose of mexclizine+dipenhydramine than anything else ever did, drawing me into some awkward 1 step backward in time phase where everything looked like it were made of jelly. I only plugged about 20mg if I remember correctly too (but I was rxed 200/daily so it could've been a lot more than that). Wiat this could have happened after snorthing, come to think of it, I don't quite recall. It took more taken orally to fall asleep, that's what's important here....
 
Brand Name Dillies are always best as they have so little inactives (2) which are safe even with a regular cotton filter. PMS (Pharmascience, canadian generics company) brand generic hydromorphone pills contain more crap and more filler : http://chealth.canoe.ca/drug_info_details.asp?brand_name_id=1945

Oops, canoe (a site that is very good for canadian medication...well they just lost a bit of quality here) removed the inactives and instead put in that bullshit that if you want more info you should contact the pharmacy, but they have microcrystalline cellulose (not silified though). You should do like I did, add way more water to the cooker than I would with brand name dilaudid, filter several times, a lot of crap will be left (which is inactive, imagine how frustrating this is with 1 and 2mg pms-hydromorphs). But I would never get floating particles. And that was before the safe injection kits they give at the hospital and at the CLSC's (city health centers in my province) had SteriFilts in them, they had securicups and all, but the cotton rectangle in there, although not as safe as sterifilts, is way better than q-tip cotton).
 
^It's not "safe", IVing any pharmaceutical requires micron filtration. But yes out of most pharmaceuticals, dilaudid has a very ideal active:inactive ratio, but it's definitely not safe to IV them without a micron filter, and even with the micron filter, it doesn't make IVing a tablet "safe".

edit: wait isn't this thread about rectal administration? Not IV....? You don't need to filter pharms for rectal admin.
 
tricomb said:
^It's not "safe", IVing any pharmaceutical requires micron filtration. But yes out of most pharmaceuticals, dilaudid has a very ideal active:inactive ratio, but it's definitely not safe to IV them without a micron filter, and even with the micron filter, it doesn't make IVing a tablet "safe".

edit: wait isn't this thread about rectal administration? Not IV....? You don't need to filter pharms for rectal admin.
Click to expand...

I'll assume as a mod you know what SteriFilts are. SteriFilts are more than good enough.

Try and find what is dangerous about lactose and magnesium stearate, 2 very common cuts for heroin, meth, coke, pcp...

This is what I meant and stop twisting my words.
 
I was told that when plugging you should mix your chemicals with saline solution.. Something about the environment killing bacteria?.. Anyone have knowledge about this? Am I safe just staying with normal tap water ?
 
Predecessor said:
I was told that when plugging you should mix your chemicals with saline solution.. Something about the environment killing bacteria?.. Anyone have knowledge about this? Am I safe just staying with normal tap water ?
Click to expand...

Hehe... that someone, thinks it's a good step for safety, but any water source ( Specif. rain catchment, bottled (got a bit of bacteria) and tap) will work. I was just being harm reduction-y ^.^
 
I just plugged about 15mg of Percocet and WOW, my god it hit me HARD. I got sick as hell, vomited still didn't help, I was burning up cold sweat, so I jerked all my clothes off in the middle of the house because I felt like I was going to burst into flames, so I ran and jumped into the shower and cold water helped A LOT. So I guess this is the method for me....LOL Do you all think I should try again with a lower dose, say maybe 5mg or 10mg? I will try in the AM and let everyone know what happens. J
 
My buddy has liver and kidney problems and told me that rectal alcohol bypasses the liver and kidneys? Is this true, can someone with liver problems safely plug alcohol?
 
You must log in or register to reply here.
Top