I have 2 pills to choose from to IV either methadone, which i dont even know if u can IV even using a micron filter. The other is generic morphine ER, its called magnus MR and its a capsule with tiny balls in them. When i crush up the tiny balls its makes a very fine powder, not waxy like other morphine i have dealt with. Are either of these two pills worth booting and which is the better ones to use.
-
OD Moderators: Keif’ Richards | Tryptamino
Opioids Just got a few micron filters
- Thread starter bnghit3
- Start date
jamesBrown
Bluelighter
- Joined
- Jun 29, 2010
- Messages
- 2,711
....in my opinion....neither....do you even know if those little balls of morphine mix with water without gelling up or something?....if you dont know these types of things you should do tests to figure out more about what your getting yourself into(potentially).
my guess would be the morphine would be your best bet if you do decide to go through with it.
Good Luck!!!
my guess would be the morphine would be your best bet if you do decide to go through with it.
Good Luck!!!
Gummybearkatie
Bluelighter
I've shot the 54 142 methadone pills and the fruit juice before. I didn't get a rush, it just kicked in normally a bit faster than usual. I used a cigarette filter, not sure what a micron filter is. And with the juice, you need to shoot so much since 1cc is only like 10mg. If you really have to poke yourself, I mean go ahead, but methadone didn't give me anything worthwhile, just extra work to prepare instead of eating it. Since it's given to junkies in clinics, it should be safe enough to IV, but there would be no reward or everybody would shoot their take home doses or tabs.
Captain.Heroin
Bluelight Crew
I haven't used methadone ever, but I am glad you are going to micron filter either one if you do IV them.
As for which one or the other, I couldn't say. I have no experience IVing either.
Both of them ideally should be put through a cotton filter first before a micron filter because I imagine they have a fair share of inactive ingredients.
As for which one or the other, I couldn't say. I have no experience IVing either.
Both of them ideally should be put through a cotton filter first before a micron filter because I imagine they have a fair share of inactive ingredients.
Morphoid
Bluelighter
I couldn't agree more. Especially the methadone pill, full of binders. I always use cotton then micron filter for IVing pills. But nowadays I tend to still to IR administration, so much safer and just have to wait a little longer for it to kick in. Never had the opportunity to use heroin but if I did, I would plug it first.
caseface99
Bluelight Crew
^^ I've been told plugging it produces an IV like rush that is only slightly less intense, heroin that is. And also if done correctly, like having yourself relieved within a few hours first.....
Also good job OP, eall too often people make this exact type of thread yet minus the micron filters. If i ever IV anything again micron filters will be my main priority. Though it's still up for debate whether I'll IV anything ever again.
Ether way OP, look up inactive ingredients and figure out which ones if any don't get caught in the size filter you have due to micro particles. IV the pill that has the least unfiltered inactive ingredients, and or buy a smaller size filter. Did you get .2 micron? Because if not then you won't be filtering out bacteria either.
.
Also good job OP, eall too often people make this exact type of thread yet minus the micron filters. If i ever IV anything again micron filters will be my main priority. Though it's still up for debate whether I'll IV anything ever again.
Ether way OP, look up inactive ingredients and figure out which ones if any don't get caught in the size filter you have due to micro particles. IV the pill that has the least unfiltered inactive ingredients, and or buy a smaller size filter. Did you get .2 micron? Because if not then you won't be filtering out bacteria either.
.
Mr Blonde
Bluelighter
Gummybearkatie said:
It will filter out small particles that a cotton ball filter won't catch. Is essential when injecting pills, otherwise you can have particulates building up in your system.
Captain.Heroin
Bluelight Crew
Read up on micron filters. 
cire113
Bluelighter
Wait why should you filter with a cotton if you have a micron filter????? Like why do both when u can just micron.... I'm prob gonnz order some microns I been ivin ir oxy 10x a day for a week lol using cotton.... Not like I really care about my life though
dokomo
Ex-Bluelighter
- Joined
- Feb 15, 2008
- Messages
- 5,589
Because in some situations, prefiltering to remove large particles makes sense. This is done to prevent the micron filter from clogging or failing.
cire113
Bluelighter
I wanna get micron filters but seems like a huge hassle and expensive... I'm too stupid to make a massive batch by calculating xxx x xxx and xxx... I would just like it for a couple shots but it just seems too complicated ... I use about 30-40 units each shot with bout 15-30mg in each shot
cire113
Bluelighter
What exactly type of filter do i need for 30 mg oxy Roxicodone??? Can someone help me harm reduce... Is a wheel same thing as micron?
dokomo
Ex-Bluelighter
- Joined
- Feb 15, 2008
- Messages
- 5,589
Follow this link that Captain.Heroin posted above--it explains all about how to use micron filters. Wheel filter is just a common name for a micron filter because, as pictured above and in the thread I linked, they are wheel shaped.
If you're going to shoot drugs, please educate yourself!! We have all the resources that you need here, use them to your advantage.
If you have the ability to make a post on a forum, you have the ability to figure out how to make a batch of doses. Think about what you said above (about filtering being a hassle)--when you shoot a drug, there is a massive inherent risk. The number of different complications, infections, etc is truly staggering. We have posters here who have experienced all sorts of complications, from simple abscesses to disabling spinal infections. All of these things are real and present risks when you inject, so it is essential to reduce harm as much as possible if you are going to inject.
Nagelfar
Bluelight Crew
Wheel is a shape of a micron. I had .22 luer lock microns DynaGard brand. I'd say two sizes, maybe 10.0 micron & 0.22 micron, first pass filter and second (so the first doesn't gum up or get clogged). or just use cottons and then .22
caseface99
Bluelight Crew
^ 10.0 micron is rather large, wouldn't .5 work fine as a pre filter?
cire113
Bluelighter
So if i inject 20-30mgs of oxy per 50 CC... how do i make a large batch so that each time I pull out 50 cc is will be around 20-30mgs worth..
And yes im STUPID help me....? Lets say im making one days worth of solution... Im gonna use every 2 hours... 40cc... so lets say 10 uses in 1 day
And yes im STUPID help me....? Lets say im making one days worth of solution... Im gonna use every 2 hours... 40cc... so lets say 10 uses in 1 day
Captain.Heroin
Bluelight Crew
The problem with this is that you will need to use more liquid to micron filter. A micron filter (the ones I use, the 25mm sized ones) eat up about 0.5 mL of water.
It's 5 times finer than compacted cotton.
Yes, definitely. The millipore ones don't have 3 layers of filters like the Whatman brand ones do, so the millipore ones clog very easily. You definitely want to filter with a cotton first.
You would want to use 40 to 60mg per mL.
1mL = 1cc = 100 units
I would get a 30mL bac. water vial, and a 10 mL pre-sealed sterile glass vial. I would dissolve 600 milligrams into 10 mL. 600mg (or 0.6 grams) would be 20x 30mg tablets, or 40x 15mg tablets, or 60x 10mg tablets, or 120x 5mg tablets.
If you have varying milligram pills then just do the math.
This way the 10mL solution would last you two days.
Or you could put 1.8 grams of oxycodone (1,800 mg) into the entire 30mL of bac. water.
You want to filter with cotton first, possibly 2-3x. Then you want to pass it through the micron filter.
Last edited: