• 💊 OTHER DRUGS 💊 Welcome Guest
    Posting Rules Bluelight Rules
    Notable Threads 1 Notable Threads 2
    Dangerous Combos Addiction Support
    Emergency Services Benzo Guide v.1
    Addiction Stories Scary Case Studies
    Biology, Pharmacology & Drugs 101
  • Select Your Topic Then Scroll Down
    Alcohol Bupe Benzos
    Cocaine Heroin Opioids
    RCs Stimulants Misc
    Harm Reduction All Topics Gabapentinoids
    Tired of your habit? Struggling to cope?
    Want to regain control or get sober?
    Visit our Recovery Support Forums

Opioids Hydro codone water extraction, failed?

Status
Not open for further replies.
A

aimf456

Greenlighter
Joined
Apr 16, 2010
Messages
13
back when i had a very low tolerance i attempted to water extract 4 hydro's and used 2 coffee filters. i felt a light buzz...... but not high, a few days before that i had eaten 3 hydro's and had a decent high. was it that additives that added to the high or did i do the water extraction wrong? this was a while ago, just now thought of posting, it was the only time i had done a water extraction

to add, about half way through the extraction it was taking too long and i had to leave so i tried to squeeze the water through the filter could this have effected anything?
 
It's hard to tell what you are doing wrong. I see 2 coffee filters and I already face palm myself.

Your CWEs will be shitty until you buy a 15mL glass vial. You basically add the powder in the vial, add water, heat with lighter, shake well until almost everything dissolves, then put it in the freezer and take it off right before it freezes. Shake it hard again and let it rest in the fridge. Take liquid.

Chemically speaking it's no different than preparing heroin, should be done in a table spoon volume...not in a pinch of beer lol.
 
oh i see, when i read up on it at the time, i just broke them up and dissolved em, then filtered. i was thinking i just didnt dissolve/break them down enough
 
I've never used heat in a CWE, hence "cold water" lol

The best thing is to not be in a rush. Prepare for it. I did one tonight with 8x5mg hydrocodones.

I measure 200mL of water, broke the pills in half and put it in a water bottle. Shook until dissolved, put in the fridge for a few hours (until ready to use)

I use a coffee filter and let it slowly filter (takes about 20 min) then I squeeze the rest of the water into the cup without getting APAP in.

Very easy. 3rd grade stuff
 
Volcano said:
I've never used heat in a CWE, hence "cold water" lol

The best thing is to not be in a rush. Prepare for it. I did one tonight with 8x5mg hydrocodones.

I measure 200mL of water, broke the pills in half and put it in a water bottle. Shook until dissolved, put in the fridge for a few hours (until ready to use)

I use a coffee filter and let it slowly filter (takes about 20 min) then I squeeze the rest of the water into the cup without getting APAP in.

Very easy. 3rd grade stuff
Click to expand...

200mL of water...if you get liver cancer at the age of 40 don't come back crying lol...Jesus...
 
Also, every time to do a CWE you lose some of the product....therefore its best to do it only when your using larger amounts of pills......4 pills dont contain enough tylenol to hurt you much at all. I wouldnt do it unless I had ATLEAST 10 pills. Then again, I used to take up to 15 pills at a time without performing a CWE and had no problems(those were the 10/325's). But I would only do that once every 2 weeks at most.
 
yea, i was just curious to try it at the time, its a cool idea, just takes a very long time
 
I took 1g of acetaminophen in the last 6 months. You people are crazy, how can you take that much tylenol...do you even know what it does on the long term? wow lol Just don't listen to these people if you know what's good for you. Tylenol is poison... it must be selectively isolated with care.
 
^dude, tylenol isn't the greatest thing but it's not nearly as bad as you're making it sound--if it was then half the population would be dropping like flies! I've had conversations with my rheumatologist about it. Stay within the recommended guidelines and take breaks whenever you can and you'll be fine.
 
Yea seriously, like I said...I would take up to 15 10/325's at a time....but only once every 10 days at MOST...usually once every month or less.......and I had NO problems whatsoever. And I recently just had my liver checked out and the doc said it is in "peak condition". So, you can take a shitload of tylenol as long as its not very often....with little to no long term damage.....you just need to give your body time to recover between doses(atleast a week or two).
 
You know, at first I thought you people are so lost because your official CWE guide is wrong. So I went to see the guide myself and read it. The guide says, dissolve 20g of powder in 40mL of hot water. So I said to myself, the guide is right, so the next possible explanation to your self-destructive behavior was: They haven't read the guide!

But that didn't work out too well either because you have more posts than I do and I know you have read the guide. So I needed another explanation...why oh why someone who read the guide would use 200mL to dissolve 10 pills...or why would someone take 15 pills without doing a CWE at all. There's only one answer to that:

You people are idiots.
 
Provoke said:
It's hard to tell what you are doing wrong. I see 2 coffee filters and I already face palm myself.

Your CWEs will be shitty until you buy a 15mL glass vial. You basically add the powder in the vial, add water, heat with lighter, shake well until almost everything dissolves, then put it in the freezer and take it off right before it freezes. Shake it hard again and let it rest in the fridge. Take liquid.

Chemically speaking it's no different than preparing heroin, should be done in a table spoon volume...not in a pinch of beer lol.
Click to expand...

do not use any heat totally not needed and will disolve unwanted chemicals
 
deweyf said:
do not use any heat totally not needed and will disolve unwanted chemicals
Click to expand...

I'm a chemist, if you contradict me on pure chemistry matters it's called impertinence. Now if you don't mind you can pick up your stuff and go read the CWE guide which also says to use heat.
 
Provoke said:
200mL of water...if you get liver cancer at the age of 40 don't come back crying lol...Jesus...
Click to expand...


What are you talking about? That's the amount of water I use to dissolve the pills before I filter the APAP out.

When I drink codeine water it's 100% clear like water. 200mL is almost an 8 ounce glass of water. 20-40mg of hydrocodone in that isn't shit.
 
Provoke said:
You know, at first I thought you people are so lost because your official CWE guide is wrong. So I went to see the guide myself and read it. The guide says, dissolve 20g of powder in 40mL of hot water. So I said to myself, the guide is right, so the next possible explanation to your self-destructive behavior was: They haven't read the guide!

But that didn't work out too well either because you have more posts than I do and I know you have read the guide. So I needed another explanation...why oh why someone who read the guide would use 200mL to dissolve 10 pills...or why would someone take 15 pills without doing a CWE at all. There's only one answer to that:

You people are idiots.
Click to expand...


I'm not an idiot, I don't mind using 200mL of water. It's 6.7 ounces. Who gives a fuck how much water I use as long as the pills dissolve.

How can anything I've done be considered self-destructive by using MORE WATER. All I'm doing is:

A) Increasing the drain time
B) Having more water to drink (that doesn't taste so bitter)


I usually take between 20-40mg of hydrocodone and I'll do a CWE on even 20mg. Adding hot water (rather, dissolving into hot water) has never affected the final product, nor does it affect the ability to extract APAP.

You're the idiot for calling me and idiot and I've reported you
 
Volcano said:
I'm not an idiot, I don't mind using 200mL of water. It's 6.7 ounces. Who gives a fuck how much water I use as long as the pills dissolve.

How can anything I've done be considered self-destructive by using MORE WATER. All I'm doing is:

A) Increasing the drain time
B) Having more water to drink (that doesn't taste so bitter)


I usually take between 20-40mg of hydrocodone and I'll do a CWE on even 20mg. Adding hot water (rather, dissolving into hot water) has never affected the final product, nor does it affect the ability to extract APAP.

You're the idiot for calling me and idiot and I've reported you
Click to expand...

Say you want to extract the codeine from 24x 500-10 pills. If you use 200mL of water and you refrigerate, you will have 2g of Tylenol dissolved in your filtrate solution. if you use 500mL to do the extraction, you will have 5g of Tylenol, and if you use 1L of water to do the extraction, you will die.

There is enough Tylenol in 200mL of water to seriously damage your liver on the long term. You can listen to me or you can do what another wanker tells you to do and end up ded. I couldn't care less about your life.
 
Well yeah duh. But like I said I only use 20-40mg of hydrocodone at a time (2g - 4g APAP)

I just extracted from 8 5-500 pills into 200mL, so you're saying I had roughly 1.5G of APAP in the final (clear) solution at the bottom??
 
We have the CWE mega thread for this topic so let's take the conversation over there if you'd like to continue this. Provoke won't be able to respond for a couple days.

To everyone, if you aren't going to civil with one another, don't post.

My suggestion: its pretty simple, do the CWE with less water and dilute it/flavor it *AFTER* to taste.
 
Status
Not open for further replies.
Top