• MDMA &
    Empathogenic
    Drugs

    Welcome Guest!
  • MDMA Moderators: Esperighanto

mdma nasal spray

Ooh, just found this. I was looking for "how to snort MDMA" and if it needs to be pulverised and put into a liquid first. Would certainly be less painful. Can it be made at home from the molly or does it need a lab?
 
Matt1000 said:
Ooh, just found this. I was looking for "how to snort MDMA" and if it needs to be pulverised and put into a liquid first. Would certainly be less painful. Can it be made at home from the molly or does it need a lab?
Click to expand...
As long as you have an accurate enough scale (I would want a scale that displays 1 decimal place below what I am measuring) and an oral syringe or other ways to measure liquids to 1/10 of a ml, you should be able to do this.

I think the most important thing is to boil the water you are going to use in the spray bottle beforehand thoroughly, so that you don’t introduce any pathogens into your nose (nobody wants that one in a million chance of a brain eating amoeba). When I made a nasal spray solution (not mdma though), I added enough salt to be isotonic 0.7% by weight before boiling, to make it easier on the nostrils. I also sanitized everything involved with isopropanol before making this spray (measuring equipment, the afrin bottle, surfaces I was working on) out of habit.

I would recommend you throw the solution in a cleaned out afrin bottle, because it’s a pharmaceutical spray, the volume of each spray is super consistent. I measured one to dispense 0.1 mls per spray (I used an accurate scale and weighed the bottle after each spray. I recorded 50 sprays and then graphed them to see the variation. They were startlingly consistent). I would recommend testing the spray volume yourself though as different brands of nasal spray my dispense different volumes, which could affect dosing calculations.

I wouldn’t make the solution too concentrated, as that will irritate the nose, I’d aim for 10-30 mgs/spray based on the reports in this thread (25 mgs is a round nice number for dosing). In my case with sprays of 0.1 ml, I would just multiply the dose per spray by 10 to get mg/ml (I think that the bottle held 1.5-2 ml in total) and then multiply it by the total volume you are going to use to calculate the total quantity to add in.

I would recommend having a second person check your calculations, because an error could lead to overdosing. As a sanity check consider limiting how much mdma total is in the bottle to something that would not be dangerous for you if you redose too much.
 
Skorpio said:
As long as you have an accurate enough scale (I would want a scale that displays 1 decimal place below what I am measuring) and an oral syringe or other ways to measure liquids to 1/10 of a ml, you should be able to do this.

I think the most important thing is to boil the water you are going to use in the spray bottle beforehand thoroughly, so that you don’t introduce any pathogens into your nose (nobody wants that one in a million chance of a brain eating amoeba). When I made a nasal spray solution (not mdma though), I added enough salt to be isotonic 0.7% by weight before boiling, to make it easier on the nostrils. I also sanitized everything involved with isopropanol before making this spray (measuring equipment, the afrin bottle, surfaces I was working on) out of habit.

I would recommend you throw the solution in a cleaned out afrin bottle, because it’s a pharmaceutical spray, the volume of each spray is super consistent. I measured one to dispense 0.1 mls per spray (I used an accurate scale and weighed the bottle after each spray. I recorded 50 sprays and then graphed them to see the variation. They were startlingly consistent). I would recommend testing the spray volume yourself though as different brands of nasal spray my dispense different volumes, which could affect dosing calculations.

I wouldn’t make the solution too concentrated, as that will irritate the nose, I’d aim for 10-30 mgs/spray based on the reports in this thread (25 mgs is a round nice number for dosing). In my case with sprays of 0.1 ml, I would just multiply the dose per spray by 10 to get mg/ml (I think that the bottle held 1.5-2 ml in total) and then multiply it by the total volume you are going to use to calculate the total quantity to add in.

I would recommend having a second person check your calculations, because an error could lead to overdosing. As a sanity check consider limiting how much mdma total is in the bottle to something that would not be dangerous for you if you redose too much.
Click to expand...

Thanks very much, very useful. I have the last of the molly crystals here, which I know are good, meaning that they work on my friends :) so, for a final time (this is in desperation!), we'll see if we can get MDMA to induce something vaguely approaching 'ecstasy' by snorting it.

I've been experimenting for a while trying to get it to work on me and have been as high as 330mg but no higher. Over about 150mg it just makes me feel monged, a bit like being stoned.

The seratonin will flow at 150mg if ingested, for about 10 seconds, so we'll see if the brute force of snorting it is enough to overcome my stubborn psychology, make it last longer, and give me something of the experience that others have.
 
Matt1000 said:
Thanks very much, very useful. I have the last of the molly crystals here, which I know are good, meaning that they work on my friends :) so, for a final time (this is in desperation!), we'll see if we can get MDMA to induce something vaguely approaching 'ecstasy' by snorting it.

I've been experimenting for a while trying to get it to work on me and have been as high as 330mg but no higher. Over about 150mg it just makes me feel monged, a bit like being stoned.

The seratonin will flow at 150mg if ingested, for about 10 seconds, so we'll see if the brute force of snorting it is enough to overcome my stubborn psychology, make it last longer, and give me something of the experience that others have.
Click to expand...
Are you taking any medications, especially SSRIs?

I don’t have a load of experience with MDMA (probably between 10-20 lifetime uses), but I have felt distinct serotonergic effects (warmth, flushing, very dilated pupils, as well as the stereotypical psychological effects) when I have taken 10-30 mg as a microdose a few times.

I would be cautious about pushing the dose too much if 150 mg isn’t doing it for you.

Do you have any experience with other serotonergic drugs? Maybe the “monged” effect is just how you perceive it— we all have preferences and different responses to different compounds.
 
No medication, no SSRIs, no (known!) psychological issues. The "loved up" part of MDMA just doesn't work on me for more than about ten seconds. Then my brain steps in and says no. That's what I suspect happens.

Pupils may dilate a little, but not like with coke. I get shivers on the come-up (32 minutes). 30mg ingested would do nothing for me, but snorted, perhaps..?

For me, after the 10 second "roll", MDMA is very similar to St. John's Wort - a mild mood enhancer, with extra energy:


There's no comedown, unlike with coke or alcohol, so it's not unpleasant, but it's not wildly exciting either. I'm missing the "big event" :) I don't actually think it's going to work snorted, and I'll give up on it, but I have to try :)
 
I’ve seen Mdma microdose nasal spray. You can also get MDMA and lsd mixed microdose nasal spray.
 
You must log in or register to reply here.
Top