Need help want to shoot morphine sulfate

[Cloudman115]

Hello, so what do I need to do to shoot some 30mg morphine sulfate ER. First timer. I never used needles but am very familiar with pharmaceutical opiates and poppay seed tea.

I need help with the whole process. Getting a needle, breaking down the morphine, to making a solution to finding a vein, the abc’s of banging morphine

thanks,
brian

look dont talk me out of it I just need help so if and when I do it right.
I never fucked with needles nor herion before.

 

[Keif' Richards]

Hey cloudman, I know this isn't what you want, but I'm just writing to say that I've seen your post. We aren't ghosting you. I, unfortunately, don't have a lot of experience with injecting pills in general and I don't know that I have ever actually injected a solution made from a controlled-release pill. I injected literally one or two of the original Oxycontin brand controlled-release pills, but I pretty quickly moved to Heroin, as it was plentiful in my area, cheaper and less-damaging than injecting pills.

If this is the same as injecting what are known as MSContin, then I can say that I've seen people prepare them using a pretty simple method. I believe it's what you would term "cold-shooting" in that they don't require a ton of special treatment to make them viable. It's been a long time though. The last time I was even in a position thinking about injecting Morphine was almost 5 years ago. I just wouldn't feel good about giving advice on the subject, but it would be awesome if someone more knowledgeable could come and help our brother out!

 

[Get_Higher]

The most important aspect of answering your question depends on the formulation of MS you wish to IV. The basics are as follows, remove colored outer layer (wipe with damp paper towel), dry completely, crush to fine powder, place powder in spoon/cooker, add COLD water, stir, filter thru cotton (swab/ball), use tourniquet if necessary, find vein, insert new needle bevel up, parallel to skin, register, inject. I could be more specific if you could provide info on specific formulation, strength in mg, intended dose, ect... also micron filters should be used when injecting pills, there are many resources explaining how to use them easily accessed from this site. One would utilize them after filtering thru cotton. Stay safe and i would certainly give more specific info if you can tell me what formulation you end up with.

 

[ratnehap]

I can tell you how I always do it.
What you need?
2 spoons, spirit, water, needle 0,5, 25mm, syringe 5ml (better more than one), lighter, cigarette filter.

Steps:
1. Remove the coating from the tablet (with hydrogen peroxide or a knife) and crush it.
2. On 1st spoon put the spirit, on 2nd crushed tablet with water (circa 2,5ml)
3. Light the spirit and heat the tablet with water to boiling.
4. Put the cigarette filter into the solution and pull it to syringe (you have to filter it because of wax from tablet).
5. Put it again on spoon, boil 2nd time with another 2ml of water and pull to syringe.
6. Wait until it has cooled.
7. Put needle on syringe.
8. Find the vein.
9. Put needle to vein.
10. Pull the plunger slightly to see if blood flows into the syringe (if it has, you are in vein)
11. Put the solution into your vein.

 

[Cloudman115]

Thanks everyone. my question was definitely answered. I guess I will stick to plugging it for now.

i have been in a real rough spot in life and I don’t want to use needles.
my mother is on her death bed with palliative care. Actually Keif, you responded to my first post last year while I was trying to help her.
now a year later, I have been using oxycodone and morphine on the regular plus my good old poppy seed tea to hold me over.
I love morphine. I know a lot of people don’t like it. Yeah it’s not that upper like oxy but it does it’s job. In fact I find less is sometimes better.

so when I plugg it I usually remove the outer coating, make a powder and Thean suck it up with a syringe. With water and the powder. I insert into rectum and wait.
it’s not perfect but it’s a Lilttle better than swallowing them.
any tips or upgrades would be great.
like how high to insert is the Main question . Does that matter? I read that it might.
sorry that I jumped the gun to shooting. Never have and hopefully never will. You know how it is sometimes you just need more from what you got.
thanks,
bt

 

[Cloudman115]

The most important aspect of answering your question depends on the formulation of MS you wish to IV. The basics are as follows, remove colored outer layer (wipe with damp paper towel), dry completely, crush to fine powder, place powder in spoon/cooker, add COLD water, stir, filter thru cotton (swab/ball), use tourniquet if necessary, find vein, insert new needle bevel up, parallel to skin, register, inject. I could be more specific if you could provide info on specific formulation, strength in mg, intended dose, ect... also micron filters should be used when injecting pills, there are many resources explaining how to use them easily accessed from this site. One would utilize them after filtering thru cotton. Stay safe and i would certainly give more specific info if you can tell me what formulation you end up with.

Thanks for the reply.
there 30 mg morphine sulfates extended release.(MS Contin 30 mg oral tablet , extended release)
I can take easily 200mg of oxycodone in a day say 120mg to 150 at a time. My morphine is usually a crutch so maybe 70 mg two times a day By mouth and recently by way of rectum

 

[Cloudman115]

Thanks for the reply.
there 30 mg morphine sulfates extended release.(MS Contin 30 mg oral tablet , extended release)
I can take easily 200mg of oxycodone in a day say 120mg to 150 at a time. My morphine is usually a crutch so maybe 70 mg two times a day By mouth and recently by way of rectum

I don’t want to shoot. Sorry if I wasted your time I explained above. But if I do I will have the proper information which keeps me alive.

 

[Keif' Richards]

Thanks everyone. my question was definitely answered. I guess I will stick to plugging it for now.

i have been in a real rough spot in life and I don’t want to use needles.
my mother is on her death bed with palliative care. Actually Keif, you responded to my first post last year while I was trying to help her.
now a year later, I have been using oxycodone and morphine on the regular plus my good old poppy seed tea to hold me over.
I love morphine. I know a lot of people don’t like it. Yeah it’s not that upper like oxy but it does it’s job. In fact I find less is sometimes better.

so when I plugg it I usually remove the outer coating, make a powder and Thean suck it up with a syringe. With water and the powder. I insert into rectum and wait.
it’s not perfect but it’s a Lilttle better than swallowing them.
any tips or upgrades would be great.
like how high to insert is the Main question . Does that matter? I read that it might.
sorry that I jumped the gun to shooting. Never have and hopefully never will. You know how it is sometimes you just need more from what you got.
thanks,
bt

Oh, the memories There is a lot less to successful rectal administration than what is often implied. Most healthy individuals without any underlying conditions are going to have a rectum that is water-tight and will only excrete when the person chooses to do so. Laying on one's side is definitely a good defense against the forces of gravity, but I've rectally administered drugs standing up and then gone about my business without any problems.

There are different oral syringes out there. Some of these are actually designed for rectal administration. They have what I can only decide as a "sharp" tip at the end of the syringe. It's not actually sharp per se, but much slimmer than the barrel of the syringe itself. Using this syringe, you should be able to feel when the tip is in and can then inject.

 

[Cloudman115]

Oh, the memories There is a lot less to successful rectal administration than what is often implied. Most healthy individuals without any underlying conditions are going to have a rectum that is water-tight and will only excrete when the person chooses to do so. Laying on one's side is definitely a good defense against the forces of gravity, but I've rectally administered drugs standing up and then gone about my business without any problems.

There are different oral syringes out there. Some of these are actually designed for rectal administration. They have what I can only decide as a "sharp" tip at the end of the syringe. It's not actually sharp per se, but much slimmer than the barrel of the syringe itself. Using this syringe, you should be able to feel when the tip is in and can then inject.

Thanks bro,
yeah I enjoy the process. I don’t mess around down there often but I am not afraid of knowing my body as well. I guess that’s why I was curious about shooting up. that seems like the ultimate intimate situation more so than inserting something into my rectum. I use a baby syringe, it works well.
somebody on here recommended not goin to far up. I guess it gets absorbed before the substance heads to the liver.
any idea?

 

[negrogesic]

You want to know how to inject pills but also don't want to know

I used to inject ms contin (morphine sulfate) all the time. The poster above described what I used to do.

Only issue i have are the cigarette filters. Never use cigarette filters. Only use wheel filters (micron filters). You will need the filters and lock syringes that can accommodate these (3ml syringes).Shooting pills, especially morphine pills (given their high wax content) is dangerous.

Years ago i wrote a guide here (FAQ) on proper pill shooting approach but I'm not sure where it went.

 

[Cloudman115]

You want to know how to inject pills but also don't want to know

I used to inject ms contin (morphine sulfate) all the time. The poster above described what I used to do.

Only issue i have are the cigarette filters. Never use cigarette filters. Only use wheel filters (micron filters). You will need the filters and lock syringes that can accommodate these (3ml syringes).Shooting pills, especially morphine pills (given their high wax content) is dangerous.

Years ago i wrote a guide here (FAQ) on proper pill shooting approach but I'm not sure where it went.

Thanks. Yeah I am in a toss up in life right now. It seems like the less high I am the more I take. So... if I had a great high maybe I would use less.. idk

 

[OpialiciouslyMe]

If you ever shoot up those pills you can't just rely on a cotton filter... You need a wheel filter. It will minimise damage from all the fillers that would get through cotton pores.
Surprised not more people told you that and it's like basic harm reduction when shooting up pills.
With morphine the anal route is a good route. I'm glad you decided to stick with that.
Don't delude yourself that you'd use less with a better high... Your usage can only escalate once you start injecting. No one does less once they start IVing.

 

[Jabberwocky]

So it's extended release pill, right?
So what you should do is take alcohol pad, the ones they give away for wiping the spot you inject. If there's coloring on the pill or some kind of stuff over it wipe it with the alcohol pad until the color is gone.
Then crush the pill, make it as smooth powder as possible. Good way to do this is wrap it in couple of layers of paper and hit it with a hammer or something. If it's not that hard you can just put it to a spoon, then put another spoon over it and press it.
Then add water, add like 3ml of it to the spoon where there's powder. Heat the spoon until the water starts to boil. Then add some more water when you've boiled some of the water away and repeat. You can add some citric acid, just a little bit.
Then take a cotton filter, suck the liquid through it and you're ready.
Post your experience here, if you wish. I'd like to hear how you liked it.
Good luck!

 

[Notsurewhat2do]

I’m having a problem with morphine sulfate ER also. I’ve tried to dissolve it but it won’t dissolve all the way. They are capsules with beads in them. This is the first time I’m using them. They are 50mg capsules. What can i do to get something out of them? I’m very new to all this.

 

[Just a little pinprick]

Hello, so what do I need to do to shoot some 30mg morphine sulfate ER. First timer. I never used needles but am very familiar with pharmaceutical opiates and poppay seed tea.

I need help with the whole process. Getting a needle, breaking down the morphine, to making a solution to finding a vein, the abc’s of banging morphine

thanks,
brian

look dont talk me out of it I just need help so if and when I do it right.
I never fucked with needles nor herion before.

If you never shot drugs my suggestion is don’t start , it’s a great way to instantly feel the effects of a drug but it puts you on the fast track to ruin if you have little self control.

But if your going to experiment and don’t wanna waste drugs ,risk infections and abscesses get a bottle of saline and and try a water shot till you get the procedure down pat.

 

[Prettyboy12]

The most important aspect of answering your question depends on the formulation of MS you wish to IV. The basics are as follows, remove colored outer layer (wipe with damp paper towel), dry completely, crush to fine powder, place powder in spoon/cooker, add COLD water, stir, filter thru cotton (swab/ball), use tourniquet if necessary, find vein, insert new needle bevel up, parallel to skin, register, inject. I could be more specific if you could provide info on specific formulation, strength in mg, intended dose, ect... also micron filters should be used when injecting pills, there are many resources explaining how to use them easily accessed from this site. One would utilize them after filtering thru cotton. Stay safe and i would certainly give more specific info if you can tell me what formulation you end up with.

I’ll have 2 of the blue 15mg and want to IV the whole pill. I’ve discovered that morphine is rather greasy, is that normal?

 

[Prettyboy12]

So it's extended release pill, right?
So what you should do is take alcohol pad, the ones they give away for wiping the spot you inject. If there's coloring on the pill or some kind of stuff over it wipe it with the alcohol pad until the color is gone.
Then crush the pill, make it as smooth powder as possible. Good way to do this is wrap it in couple of layers of paper and hit it with a hammer or something. If it's not that hard you can just put it to a spoon, then put another spoon over it and press it.
Then add water, add like 3ml of it to the spoon where there's powder. Heat the spoon until the water starts to boil. Then add some more water when you've boiled some of the water away and repeat. You can add some citric acid, just a little bit.
Then take a cotton filter, suck the liquid through it and you're ready.
Post your experience here, if you wish. I'd like to hear how you liked it.
Good luck!

Is the heat necessary for this process?

 

[Get_Higher]

The heat will make the "grease" dissolve but all your M siulf break free just fine with cold water, maybe a pinch of salt, and enough time, if you stuff some cotton down a 3-5 cc barrel you can crush both 15s and mix with watet you put in freezer half hr prior, stir/shake/whatever for a few-10 min then filter thru the cotton backloaded one from earlier you are there. You could possibly get yhe solution down to a final volume less than 1cc but better with 1.5 to 2 im your situation.

 

[Mental Kenny]

Up the arse. Plugged it's pretty decent. Effective and much safer than shooting up.

I almost always used orally, crushed and kept in the mouth for sublingual absorption. Good to keep them sweats away.

However if trying to get something more from them I find the backdoor method quite enjoyable, mind not that much, but still at least remotely recreational.

 

[Deleted member 554582]

The heat will make the "grease" dissolve but all your M siulf break free just fine with cold water, maybe a pinch of salt, and enough time, if you stuff some cotton down a 3-5 cc barrel you can crush both 15s and mix with watet you put in freezer half hr prior, stir/shake/whatever for a few-10 min then filter thru the cotton backloaded one from earlier you are there. You could possibly get yhe solution down to a final volume less than 1cc but better with 1.5 to 2 im your situation.

If the pill is like MSt or other control released form there are unsuitable for IV-solution always is unpure.May be it will work well rectal.If a capsule form even prolonge release its a suitable for IV,cause in the capsule form there is only Morphine and wax particles and you easy can separate this