sveets
Bluelighter
- Joined
- Jul 15, 2009
- Messages
- 106
I got 1.5 powder from my guy and its decent. Some bags can be good some can be less than good, but overall it's alright.
I wanted to try making a tiny bit/piece of crack so I did the "spoon forumla" and this is how i did it but im not sure if it was the most efficient.
1. Put 4 parts powder to 1 part baking soda (less on my 2nd attempt) in a metal spoon.
2. Put just a little bit of water then stir it up.
3. Hold a lighter under and watch it boil/bubble (my first time I got A LOT of bubbles, 2nd time I used less b soda and got less small bubbles and actually saw more of an oily film form
4. I dipped a cold butter knife in the solution multiple times and was able to get a globby substance stuck on the knife which I then let cool for a couple minutes.
5. Scraped off the "crack" from the knife
6. Don't have a real crack pipe, so I followed directions to make a can pipe (cig ashes, holes, carb, etc...)
7. I smoked it, and felt some kind of euphoric rush but I didn't use a lot of powder to begin with b/c it was mostly an experiment.
So, my main issues I ran into were after the substance was boiling and the film started to form. I dipped the cold butter knife in but when I was done and the water had evaporated I think there was a lot of residue left on the spoon.
I'm sure if I use more powder I can get a better result, but maybe someone more experienced has a better method or an adjustment to a step/steps.
Also, I'm pretty sure the can-pipe isn't the most efficient way to smoke crack. It seems to burn weird, and my first time I tried using tin-foil like I would with H or even pills (chasing it/sliding it accross). It didn't work on tin-foil and I gave up and tried again using the can pipe.
I wanted to try making a tiny bit/piece of crack so I did the "spoon forumla" and this is how i did it but im not sure if it was the most efficient.
1. Put 4 parts powder to 1 part baking soda (less on my 2nd attempt) in a metal spoon.
2. Put just a little bit of water then stir it up.
3. Hold a lighter under and watch it boil/bubble (my first time I got A LOT of bubbles, 2nd time I used less b soda and got less small bubbles and actually saw more of an oily film form
4. I dipped a cold butter knife in the solution multiple times and was able to get a globby substance stuck on the knife which I then let cool for a couple minutes.
5. Scraped off the "crack" from the knife
6. Don't have a real crack pipe, so I followed directions to make a can pipe (cig ashes, holes, carb, etc...)
7. I smoked it, and felt some kind of euphoric rush but I didn't use a lot of powder to begin with b/c it was mostly an experiment.
So, my main issues I ran into were after the substance was boiling and the film started to form. I dipped the cold butter knife in but when I was done and the water had evaporated I think there was a lot of residue left on the spoon.
I'm sure if I use more powder I can get a better result, but maybe someone more experienced has a better method or an adjustment to a step/steps.
Also, I'm pretty sure the can-pipe isn't the most efficient way to smoke crack. It seems to burn weird, and my first time I tried using tin-foil like I would with H or even pills (chasing it/sliding it accross). It didn't work on tin-foil and I gave up and tried again using the can pipe.
