making crack for a beginner?

[unknownn.314]

so i wanna start off saying im absolutely not going to be doing this regularly, & im aware of the dangers (but its not my DOC anyways lol) but i had some questions on making ur own crack. should there still be water left on the spoon once its been heated & just remove the white pastey clumps floating, and if so do i let them dry for x amount of time or are they usable right away? or should the water be mostly gone? also, what should it look like after enough water is added, should it be a paste or completely liquid? i had very different results both times i tried, but they both hit. oh, and is there anything i should do to make it safer?

 

[ageingpartyfiend]

so i wanna start off saying im absolutely not going to be doing this regularly, & im aware of the dangers (but its not my DOC anyways lol)

Said every crack addict ever

 

[negrogesic]

Properly made crack isn't done by mixing baking soda and cocaine and heating till the water evaporates.

The correct way is to gently heat the cocaine in a spoon with baking soda and water, at which point you'll see oily spots on the top of water. The oily spots are what you want:



With a metal tool, you start scraping these oily spots to the side of the spoon (and out of the water). As you drag these to the side, they start clumping together and will dry pretty quickly as a hard lump. Continue doing that until you get all the oil spots out.

Just mixing the baking soda and cocaine in water and boiling the shit out of it until the water is gone isn't a good way to do it (although i know some people do that). It will probably still work but it won't smoke nearly as well or hit nearly as hard.

But watch out. Crack is incredibly addictive, its almost like an entirely different drug when compared to cocaine.

 

[G_Chem]

Properly made crack isn't done by mixing baking soda and cocaine and heating till the water evaporates.

The correct way is to gently heat the cocaine in a spoon with baking soda and water, at which point you'll see oily spots on the top of water. The oily spots are what you want:



With a metal tool, you start scraping these oily spots to the side of the spoon (and out of the water). As you drag these to the side, they start clumping together and will dry pretty quickly as a hard lump. Continue doing that until you get all the oil spots out.

Just mixing the baking soda and cocaine in water and boiling the shit out of it until the water is gone isn't a good way to do it (although i know some people do that). It will probably still work but it won't smoke nearly as well or hit nearly as hard.

But watch out. Crack is incredibly addictive, its almost like an entirely different drug when compared to cocaine.

While this does work, I recommend allowing those oily spots to cool/harden a bit for easier separation. They are oily cuz of the heat and just need time to resolidify.

Also always good to do a water wash once separated, place the crack into a spoon with fresh water and cook again. Now separate just like before. Repeat this 4-5 times to ensure all levamisole is gone from the product.

-GC

 

[ageingpartyfiend]

Your mix will also start to foam up at some point - don't stop cooking there - keep going until the 'foam dome' clears and your spoon/container looks like the one posted above - if you're gonna risk fucking your life up bigtime may as well do it properly eh

Also @G_Chem , I have never, ever heard that water washes remove Levamisole? They are a good idea anyway (and essential if using ammonia, hopefully obvious)..but as far as I'm aware Leva can only be removed via certain tricky 'washes' (chloroform iirc)

 

[negrogesic]

While this does work, I recommend allowing those oily spots to cool/harden a bit for easier separation. They are oily cuz of the heat and just need time to resolidify.

Also always good to do a water wash once separated, place the crack into a spoon with fresh water and cook again. Now separate just like before. Repeat this 4-5 times to ensure all levamisole is gone from the product.

-GC

I guess my approach is to coalesce the little oil droplets into a single puddle of oil which i then scrape to the side to allow it to solidify. Its never particularly hot at that point, and has definitely cooled, but still remains in oil form. I'm not sure what happens if it were to fully cool with those oil droplets ontop . But yeah, if it's too hot the oil isn't viscous enough and has trouble coalescing.

 

[ageingpartyfiend]

...drip water off a melting ice cube into the spoon while lightly stirring = rock

 

[yubacity]

Dont put to much heat on it dcont add to much baking soda dont fill spoon with water have so it covers but havew enough on the spoon keep taking heat away dont burn your gear like people have said you will see oily spots work on them spinning it around and it will start rocking up.

 

[nznity]

so i wanna start off saying im absolutely not going to be doing this regularly, & im aware of the dangers (but its not my DOC anyways lol) but i had some questions on making ur own crack. should there still be water left on the spoon once its been heated & just remove the white pastey clumps floating, and if so do i let them dry for x amount of time or are they usable right away? or should the water be mostly gone? also, what should it look like after enough water is added, should it be a paste or completely liquid? i had very different results both times i tried, but they both hit. oh, and is there anything i should do to make it safer?

Have u checked out my guide?

Cocaine - Nznity's guide to make baking soda crack cocaine

Ok guys, I'm gonna give you my recipe so you guys can Cook your own banging rock cocaine instead of buying that cut to shit Bullshit. Here it goes: 1. You Need a spoon, some baking soda AND at least 1+Gram of decent blow. A lighter of course 2.mix the coke with the baking soda, a ratio of 80...

bluelight.org

I was high as fk when I made it, dunno if it helps a bit. Better to cook your rocks than buying cut crap yo.
Stay safe,
nico xx

 

[nznity]

so i wanna start off saying im absolutely not going to be doing this regularly, & im aware of the dangers (but its not my DOC anyways lol) but i had some questions on making ur own crack. should there still be water left on the spoon once its been heated & just remove the white pastey clumps floating, and if so do i let them dry for x amount of time or are they usable right away? or should the water be mostly gone? also, what should it look like after enough water is added, should it be a paste or completely liquid? i had very different results both times i tried, but they both hit. oh, and is there anything i should do to make it safer?

Yes there can be water left, rhe important thing is the oil that comes out from the reaction. It's not a paste, it's oil, kinda yellowish, u collect the particles and it becomes solid, u let it dry for 2 mins and it's ready to go. It takes quite a few tries to master the technique of cooking crack, once u get it its pretty easy to do it. U also notice when the coke ya got its utter shit or straight fire. U should always use a ratio of 20% baking soda 80% cocaine, it's just a splash into the mix so it can react, when u put too much it gets leftover in the water anyway. Check out my guide for more tips xd, I don't wanna go in there or I'll shit myself hahahaha. Cheers man and careful with rock, it's very insidious stuff.
Cheers.

 

[Nurse Ratched]

OD > DC

 

[unknownn.314]

Said every crack addict ever

u right i could tell how easily ppl get addicted to that, i saw myself craving more….but im already dealing with the effects of where that feeling led me 3 years later with fetty, so im just gonna leave that dope alone

 

[ageingpartyfiend]

u right i could tell how easily ppl get addicted to that, i saw myself craving more….but im already dealing with the effects of where that feeling led me 3 years later with fetty, so im just gonna leave that dope alone

good news...it's a shit drug mate

 

[crazyhairman]

The coke we got from a particular guy was so stepped on there was a joke going around all we had to do was add water and it would rock itself up.

We used mountain dew once and a microwave made mush balls , it worked , didn't look very nice but hey...

 

[Antiprosynthesis]

Your mix will also start to foam up at some point - don't stop cooking there - keep going until the 'foam dome' clears and your spoon/container looks like the one posted above - if you're gonna risk fucking your life up bigtime may as well do it properly eh

Also @G_Chem , I have never, ever heard that water washes remove Levamisole? They are a good idea anyway (and essential if using ammonia, hopefully obvious)..but as far as I'm aware Leva can only be removed via certain tricky 'washes' (chloroform iirc)

When its foamy its bad coke...

 

[Starhigh]

When its foamy its bad coke...

Lmao I’m doing this solo for the first time and mine foamed . Haha I knew it was cut up but that made me laugh.

 

[GulpingBatteryLiquid]

From my experience, crack isn't really that much more addictive than powder coke. But powder coke is very addictive, and I'm too lazy to be fiddling with a lighter and a hot pipe every few minutes

The classical poet Percy Robert Miller actually wrote about the production of crack

You won't be getting your money if your shit be cooked wrong
Overcook your dope, it might come out brown
Them fiends gon' run your ass clean outta town
But fuck that, I'm 'bout to put my soldiers in the game
And tell you how to make crack from cocaine
One, look for the fellow with the whitest snow
Two, no buying from no fellow that you don't know
Make your way to the kitchen where the stove be
You get the baking soda, I gots the D
And get the triple beam and measure up your dope
Mix one gram of soda every seven grams of coke
And shake it up until it bubble up and get harder
Then sit the tube in some ready-made cold water
Twist the bitch like a knot while it's still hot
And watch that shit rock and rise to the fuckin' top
And now your cocaine powder is crack (Ma— Ma— Ma— Ma— Make crack like this)

""

 

[Pickledlemons]

Yeah its pretty easy to do for a beginner but it has to be high quality cocaine. If its stepped on street junk you probably wont have much luck... Thats my experience anyway.

 

[GulpingBatteryLiquid]

Yeah if your shit is cut to pieces you'll just end up with goop, even if there's some amount of cocaine in it

 

[Bubsmeds]

When its foamy its bad coke...

No, it's not. Typically just not too much experience cooking base. My first 5 or 6 cooks weren't too great. Some complete fails. A lot of foam at the beginning of the reaction is a good thing. All that foam going on is lots of cocaine reacting with the sodium bicarbonate. Maintaining the right temp. range is very important. Too low, or not enough s bicarb leaves unreacted coke in water. Too hot or too much bc leaves less product, less powerful product full of sb. So very little foam on first reaction, assuming you have enough sb in it is bad coke. I cooked a little .5 last night and it foamed like hell. There was no soda left in spoon because it all reacted with coke and was literally nothing left on the bottom. No cut left on bottom of spoon either. There would have been a lot of white resting on bottom of spoon. I brought back a rock of 4.4 g after drying for a couple hours. This was from a half oz. right off the brick, stamped BENZ, and seems to be 90+ percent pure from my guess.