• REAGENT TESTING & DRUG CHECKING Welcome Guest
    Posting Rules Bluelight Rules
    Featured Link 1 Featured Link 2
  • RT&DC Moderators: Senior Staff

just got my ez-tester

D

dakky

Bluelighter
Joined
Jul 11, 2001
Messages
377
Location
London
Arrived in the mail today, four bottles.
One is marked ez-test, three marked supreme. One of the supreme bottles has phase 3 marked on it... the other two are blank. THat one has a red lid, the other rest black lids.
How can i identify one from the other?
cheers
sam
 
Hi !
If you are absolutly sure of that, just mail to ez test because it is not really possible to identify them if not mentioned.
They will find the solution...
You can use the marquis, normally black, but the two others are red no ??
Good suggestion to EZ test : May we have 1 color per reagent please boys ???
 
The other two bottles should be marked 1 and 2. Not with a marker but on the label.
If this is not the case, something went wrong.
We are working on better packing and better information leaflets.
aj
 
This happened to me too, one with a red cap says "Phase 3" but the square next to the word "Phase" on the other two bottles with black caps is blank. Their labels are exactly identical, I checked them carefully. They both have a "2" printed in a square on the other end of the label, which I figure is some kind of warning symbol because it's alongside one that's an "x" in a square, and it's in the same position as the 3 symbols on the "Phase 3" bottle which are a black square, an "x" and a picture of a hand dissolving.
The only obvious difference is that one bottle was rubber-banded to the Phase 3 bottle, and the other was loose, by itself. I mentioned this twice to Ewoud and that apparently means nothing since he's not answered about it in his replies.
Something else I asked (which he similarly ignored/didn't answer the first time, waiting to see if he does the second) was, would it be possible to tell which is Phase 1 and which is Phase 2 simply by testing an already-known sample? I mean, if I take one of the unlabeled bottles and use it along with Phase 3, either it will or it won't produce the expected reaction, right? My only concern about this is that it might be dangerous to mistakenly combine Phase 1 and Phase 3, since following the instructions properly would never have that happen.
Or would that only work if I had known MDA to test? I forget what colour 2+3 is supposed to turn on MDMA, isn't it no rxn? because if so there'd be no way to tell if I had 1+3 or 2+3, I would guess.. doh..
 
bumping this, i'm curious if anyone can help while i'm waiting for a reply to the email.. maybe should re-post with a more obvious topic?
 
I can tell you what I know, based on the 'supreme' test, which is basically everything you have minus a phase 3.
Your kit should come with four bottles. One of them is the EZ-Test Classic which is the tried, true and tested marquis reagent. This is the one that turns purple->black. This has a black lid. You can put this aside because it plays no further part in the amine differenciation.
Two of the bottles that are left are simon's reagent and robadope reagent.
Simons is most likely marked X1 and should have a Red lid.
Robadope is most likely marked X2 and should have a white lid. (I'm looking at the small picture on the eztest.com site to get this)
The third is a 'fixer' for both Simons and Robadope. Basically its the second chemical you add to your 'pill sample + reagent' mix to get a colour change to take place.
It shouldn't be too hard to figure out what is what if you have a known MDMA or MDA (or amphetamine or methamphetamine) sample, even if all the bottles are blank and have same coloured lids.
Lets lable the bottles 1 2 and 3
MDMA/meth senario:
Take pill scraping:
Add a drop of 1 + a drop of 2 (1 + 2) if a BLUE reaction occurs then one of your bottles is simons and one is the fixer
If nothing happens, try with 2 + 3 combination and 1 + 3 combination.
You should then be able to tell simon's from the fixer by placing a drop of each onto a white ceramic plate. Simons will be a tiny bit of an off colour - like a very light orange I think. The other one will be the fixer, and then by genius mathematics the remaining bottle will be robadope.
Final word of warning. Do this in a WELL ventilated area. I'm pretty certain that one particular combination of reagents in the extreme kit should not be allowed to come into being. Off the top of my head I think its the marquis and the fixer but I can't remember. Just do it safe and don't do it in the toilet on a mirror or something. Do it in the garage.
You might also want to try doing 4 different scrapings and testing each reagent by itself. To see if you got 2 marquis's by mistake.
 
Hm. Since you mentioned looking at the picture on the website, I decided to do the same.
eztest-xtreme-box.jpg

I bought an "upgrade" so we can disregard the bottle of Marquis.
Red: I have a bottle with a red cap whose label seems to match the one in the picture, except where the bottle in the picture has a clear "1", I have a flat black square. Since there is an apparently handwritten "3" on the other end of the label where it says "Supreme Test Phase", I might suppose the pen that wrote that also blacked out the "1". However, this is the only bottle with 3 symbols like that, and the contents of this bottle are "an off colour - like a very light orange". Sounds like Simon's reagent, unless Robadope is coloured like that as well?
Black: I have two identical black-capped bottles. Their labels seem to match the one we can see on the white-capped bottle in the picture. That is, they both have a "2" and then the "x" symbol. From the picture plus the xtreme test instructions which have you combine 1 and 2 (blue to MDMA), or 2 and 3 (red to MDA) - which means 2 must be the fixer and 1 must be Simon's - it seems like the third, black-capped bottle should be Robadope, and have a number "3" visible where the others have "1" and "2".
White: I have no white-capped bottles.
[edit]
I tried one of the mystery black-capped bottles along with what I now assume is Simon's on a known MDMA sample and it gave no particular reaction, certainly not the blue colour that should show, so it can't be fixer. I didn't try the other bottle in the same fashion, but it is identically packaged and when I tried each of them alone, to see if they were maybe Marquis by mistake or something, they gave identical light pink or salmon colour reactions to MDMA. I am thus assuming those two bottles contain the same liquid, and that that liquid is Robadope, like the black bottle in the pic seems it should be, even though the bottles I have say "2" "X" and not "3" "X" like logic would expect. Thus, as far as I can tell, I am missing a bottle of fixer.
[/edit]
BTW the instructions for the test say nothing about it being particularly dangerous to mix Marquis and fixer or any combination, for that matter. If there's one or more combos that have especial danger that should prolly be mentioned in the documentation.
[ 10 March 2002: Message edited by: stardragon ]
 
The confusion comes from the fact that we first made EZ Supreme plus all the different labels and then changed that to X-TREME. We did not expect to have Robadope finished so quickly after we came with EZ Supreme.
Blame us but we were stuck with loads of stickers and labels specifically for EZ Supreme.
We had to do a quick-fix and change everything into X-TREME, hence the lousy labels etc.
We are currently working on new labels, new leaflets, new everythings and everything should be better soon.
Hope this helps a bit
aj
 
lol - methinks perhaps the answer still could be in there with a bit more combinations. Feel free to icq me on 17066660 - we can work this out mathematically if you like in a step by step process that slowly eliminates until we find either you have the right ones now and you can mark them, or someone has accidently given you say, two simons and robadope but no fixer.
We could do that, or try to get a replacement - which (whilst I don't speak for them in any way) I'm sure EZ-Test will be happy, and now that they have some mystery email problems sorted out, able to.
 
Just for fun let's go through all the combos. I have 3 bottles (remember I got no 4th bottle of Marquis since I already had one), one distinctive with red cap, let's call it R, and the other two I have now marked "M1" and "M2" to be able to distinguish them later. I'm testing them on a known MDMA sample.
R + M1 = no rxn.
R + M2 = no rxn.
M1 + M2 = no rxn.
Actually all of the above are a slight yellowish kind of thing, but in any case not the expected blue colour. So I'm not mixing Simon's and fixer in any of those combos. From your description of what Simon's reagent should look like, I still think that's what's in bottle R. Since neither of the other two is fixer, that really leaves them to be both Robadope. They're not Marquis because they don't give Marquis reaction to MDMA, and I don't see why they would be anything else.
aj, do you think if I mailed Ewoud I could get just a bottle of fixer, or would it be necessary to send a whole new kit?
[ 11 March 2002: Message edited by: stardragon ]
 
HEY GUYS,
SORRY FOR THE DELAY BUT HERE'S THE ANSWER:
marquis is marked ez test
phase 1 (simon's) has a no 1 at the bottom of the label
phase 3 (robadope)is marked 3 next to the word phase
the fixer is marked 2 at the bottom of the label.
we will have new labelling soon, it got confusing because we launched robadope's right after we finished ez test supreme..sorry about that..
If it is not clear yet, just send me an e-mail [email protected] ..
 
Ok so according to that I have Robadope (which I guess must be coloured orangeish after all?), and 2 fixers. Well that would also fit the known rxns, which was that no combo gave me blue to MDMA. Wish I had some MDA or speed to test.
Ewoud, I'll shoot you a mail, although I'm the -s-p-e-c-t-r-u-m- you've already been corresponding with about this mix-up...
 
You must log in or register to reply here.
Top