• 💊 OTHER DRUGS 💊 Welcome Guest
    Posting Rules Bluelight Rules
    Notable Threads 1 Notable Threads 2
    Dangerous Combos Addiction Support
    Emergency Services Benzo Guide v.1
    Addiction Stories Scary Case Studies
    Biology, Pharmacology & Drugs 101
  • Select Your Topic Then Scroll Down
    Alcohol Bupe Benzos
    Cocaine Heroin Opioids
    RCs Stimulants Misc
    Harm Reduction All Topics Gabapentinoids
    Tired of your habit? Struggling to cope?
    Want to regain control or get sober?
    Visit our Recovery Support Forums

Heroin How do you turn tar into powder?

Status
Not open for further replies.
P

pumkin_escobar

Greenlighter
Joined
Sep 10, 2010
Messages
48
Location
Tejaski
how come every every every single forum i come across where someone asks how to turn tar into powder someone just says smoke it, shoot it, plug it, dammit i want a straight answer and then someone else will come along and say "why dont you use the search" WELL I'VE SEARCHED 1000 F'ING TIMES AND STILL CANT GET A STRAIGHT ANSWER, SO PLEASE!!!! SOMEONE JUST TAKE THE 2 SECONDS TO ANSWER THIS, my veins are absolutely shot and skin popping is taking its toll. can someone please help me out since this website is about harm reduction. i can't stand snorting the liquid so please dont give that as an answer either. MUCH THANKS AND APPRECIATION TO ANYONE WHO CAN ANSWER
 
Please if you are going to say smoke or shoot, dont reply. I shoot, have no veins left. Also please dont make points about no rush or it being a waste, i know what it is, i'm not trying to get high i'm trying to mantain
 
I'm looking for a tek on this, please don't post unless its a solid answer. I'm really trying to obtain this info for harm reduction. Theres a way to get it into powder without having to use a ton of freaking cut to where you have to snort like 10 lines to get a .1 or .2 in you.
 
im sure in malleable into some sort of powder with the help of another compound......

although if ur thinking HR, adding to it makes it more harmful.....thats valid............

and i dunno if your gunna find an answer........good luck mate
 
The only way to do it would be to dissolve the tar in some form of solvent - containing no water at all - that won't react with it, so it stays as Diamorphine and all the other Alkaloids that it contains.

But this is the problem, because there are so many different Alkaloids in there, it makes it extremely difficult to find a solvent that won't react with every single Alkaloid for certain.

Anyway, when you've dissolved the tar into X-Solvent, then you'd have to find an appropriate way to filter it (probably using a Micron Filter).
After that you'd have to leave the solvent to evaporate and you should be left with a pile of powder that's all the Alkaloids that were contained in the B.T.

So, if you've a good understanding of Chemistry and know what solvent to use etc. etc. (because I don't) then you should be able to do this. But, because I'm not certain about this.... well.... I'm not certain about this lol.
 
I know for a fact this has been discussed and answered numerous times in the past UTSE!!!!!
 
pumkin_escobar said:
how come every every every single forum i come across where someone asks how to turn tar into powder someone just says smoke it, shoot it, plug it, dammit i want a straight answer and then someone else will come along and say "why dont you use the search" WELL I'VE SEARCHED 1000 F'ING TIMES AND STILL CANT GET A STRAIGHT ANSWER, SO PLEASE!!!! SOMEONE JUST TAKE THE 2 SECONDS TO ANSWER THIS, my veins are absolutely shot and skin popping is taking its toll. can someone please help me out since this website is about harm reduction. i can't stand snorting the liquid so please dont give that as an answer either. MUCH THANKS AND APPRECIATION TO ANYONE WHO CAN ANSWER
Click to expand...

well it's harm reduction telling you to NOT mix it with tylenol and other crap that you use. if you're going to try that route then use an inert substance, not tylenol:|

it's a lot safer using the liquid nasal route rather than making some mixed bag of fuck knows what. see what i'm saying?

stop skin popping as well, you're going to lose a limb sooner or later. i really suggest you do some research into the IV technique, problems which can arrive and the small amount of home first-aid gear you can equip yourself with before having to see a doctor/emergency room.

please look after your body.
 
DO NOT mix it with tylenol! that is such bad advice. this is extremely simple and i have done it hundreds of times.....you simply blend it in a coffee grinder with lactose. Usually you should use about 2-4 parts lactose for every 1 part tar. Of course you have to have enough tar for it to not just stick on the bottom of the blender...i would say u need a few grams atleast, but maybe you can do it with less, i dont know. But once again, very simple, mix with lactose.

Done.
 
i've mixed with lactose, yields too much, i know its possible but its kinda an annoyance to snort. as to IV'ing being the answer, dont you think i've IV'ed for years before i started skin popping, i only started skin popping after it was just impossible to find a vein, and when it comes to harm reduction, YES filling you dope with a bunch of crap and snorting it is way safer than skin popping, like the reply above "you can lose a limb" i'm just trying to stay well at this point. i've seen a tek on evaporating it a bit, has that worked for anyone else.
 
Nortyy said:
I know for a fact this has been discussed and answered numerous times in the past UTSE!!!!!
Click to expand...

its been discussed yes, but never answered, people always say what you say, if its sooooo easy to find, then you find it and send me the link. i nicely asked if you are going to send the same reply dont send a reply. you know other people are looking for this answer too, please be part of the solution and don't let the problem persist
 
Here's something I used to do sometimes- Take your tar and put it on a small plate with a minimal amount of water. Dissolve the tar into a brown paste, and smear it over the surface of the plate. Let it dry, (the less water used, the quicker it dries obviously) then take a razor blade and scrape up the film from the surface. You will be left with a small pile of pretty brown crystalline tar. Be mindful that if there is any humidity in the air, it will turn right back into goopy tar, and is pretty much guaranteed to do so eventually no matter what, so use it quickly.

With that being said, I don't really recommend this method due to several factors, one being that it takes time and is a pain in the ass which isn't really worth it in the end, in my opinion. Also, mixing with water and letting sit causes hydrolization of the Diacetylmorphine back into Morphine, effectively making your dope much weaker. Time is a major factor, but I think that no matter quick you are with this method, you are inevitably lessening the potency to some degree. Only use small(er) amounts at a time, as in don't mix up a whole gram at a time unless you plan on sniffing it all up within a half an hour or less.
 
react with hydrochloric acid, add a tiny bit of water, base-ify, extract with ether, evaporate.
done and done.

and it might help if you weren't such a dick to everyone who posted in your thread.

One time I sent a letter to a record company asking for free shit, except I only wanted free stuff it was new and un-used. And only if it was from Gang Green, Stalag 13, or Op Ivy. and then I only wanted merch if it was black and red colorway, and only in size medium.

You know what I got? fucking nothing.
 
my words aren't intended to be rude, but i've tried and tried and tried and everyone just says search or changes the subject, i'm not trying to be a dick i'm just trying to get the right answer so as to finally put an end to the speculation. as for finding ethyl ether thats just about impossible here, methyl ether yes but thats toxic
 
and i'm not asking for merchandise with your so called comparison, i'm just asking for info, i'm sorry i thought thats what this forum was for
 
get Prestone brand starter fluid.
This contains Ether and heptane. Heptane evaporates at a much lower temp which makes this work. spray into a non-reactive metal pipe (stainless steel) and let condense and drip down into a beaker or flask. the heptane will gas off, the ether will condense and collect.
 
I was going to say mix it with lactose, but you already said that ends up being too much powder to snort. I would suggest trying lactose again, but using less of it so you don't have as much powder. You really should not need to use 10x as much lactose as you have dope. Take JamesBrown's advice and try using 2-4 parts lactose to every 1 part tar, which means use .2-.4 of lactose for every .1 of tar. If that doesn't work, then mixing it with any other powdered substance is pretty much going to give you the same results.

Also you could try the liquid nasal route again, but use more water so it might be tolerable that way. It would be helpful if you explained why you didn't like doing it this way so others could give you some tips on better ways to go about doing that.

Thirdly, better IV technique is definitely something you need to work on if you have no usable veins. I don't know how long you've been IVing, but if you do it correctly, are sanitary and sterile when you do it, you should be able to IV for quite a period of time without much damage being caused. It might be beneficial for you to look through the OD directory for the link in there on proper IV technique.

That's about it on my suggestions for you. Making tar into a powder is about all you really can do and it'd be the same results as mixing with lactose and just about any other powder I imagine, so bottom line is retry the lactose thing using less of it and if that doesn't work, try my suggestion to liquefy it, but using more water to possibly make it more tolerable to have in your nose.

P.S. You said you didn't mean to come across as rude, but perceptions are everything, so keep that in mind for next time. If you're calmer and a little less abrasive in the way you post, the community here will be more receptive to your and your issue and be more open to giving you quality solutions as well.
 
dude, you live in the land of tar. i dont understand how you havent figured this out yet.

1)take your tar, dilute it will the smallest amount of water possible until it gets paste like
2) chop up whatever powder you want, for cheese you use tylenol PM but that tylenol will fuck you up. i suggest using benadryl tablets. just mix the paste in with the chopped up tablet. the powder absorbs the paste and gives you a damp powder. sniff away.
 
Status
Not open for further replies.
Top