phoetad
Bluelighter
how is cocain cooked into base?
-
OD Moderators: Keif’ Richards | Tryptamino
coke
- Thread starter phoetad
- Start date
ahkuhstic
Bluelighter
normaly people would flame saying 'use search' yadda yadda
but seeing as how its 3a.. im bored and you want to get high.. ill help..
Crack
Mix 2 parts of coke HCL to 1 part baking soda in 20 ml of water. Heat solution gently until white precipitates form, and stop heating when precipitation stops. Filter and keep precipitate.
Wash precipitate once with water (this procedure usually omitted in street product).
Dry 24 hours under heat lamp. Voila. The product is much less pure (there is lots of baking soda left) but the procedure is safer.
Common Crack Method
Mix 2 parts of coke HCL (regular cocaine) to 1 part baking soda in 20 ml of water. Heat solution gently until white precipitates form, and stop heating when precipitation stops.
After gentle heating, the freebase coke will float to the top, any excess soda will precipitate to the bottom.
Given that, you'd never filter it, and the 24 hour heat lamp thing is unrealistic, too.
Just collect the compound that rises to the top, and you have the finished product.
Note that what you're trying to do is start and sustain a chemical reaction (bonding the hcl with the base-soda) so as long as the reaction is happening you don't have to continue heating.
there.. now say thanks
but seeing as how its 3a.. im bored and you want to get high.. ill help..
Crack
Mix 2 parts of coke HCL to 1 part baking soda in 20 ml of water. Heat solution gently until white precipitates form, and stop heating when precipitation stops. Filter and keep precipitate.
Wash precipitate once with water (this procedure usually omitted in street product).
Dry 24 hours under heat lamp. Voila. The product is much less pure (there is lots of baking soda left) but the procedure is safer.
Common Crack Method
Mix 2 parts of coke HCL (regular cocaine) to 1 part baking soda in 20 ml of water. Heat solution gently until white precipitates form, and stop heating when precipitation stops.
After gentle heating, the freebase coke will float to the top, any excess soda will precipitate to the bottom.
Given that, you'd never filter it, and the 24 hour heat lamp thing is unrealistic, too.
Just collect the compound that rises to the top, and you have the finished product.
Note that what you're trying to do is start and sustain a chemical reaction (bonding the hcl with the base-soda) so as long as the reaction is happening you don't have to continue heating.
there.. now say thanks
Bah, the baking soda method is aweful! Here is a better way.
HOW TO MAKE CRACK (A primer by Deus. v1.0)
First you will need:
1) Stove
2) Ammonia - ***IMPORTANT*** CLEAR AMMONIA!
3) glass vial
4) small jar to hold vial (babyfood works well)
5) eye dropper
6) distilled water (preferable)
Step 1) Ok, take your coke and disolve it in a few mL of water (you don't need much, but make sure the coke is fully disolved) in your vial.
Step 2) Fill your small babyfood jar with water and put it in a pan on the stove thats also filled with water. Put your vial filled with coke+water in the babyfood jar.
Step 3) Heat the solution until its warm/hot but not so hot that it would hurt to put your finger in it.
Step 4) Add drop by drop ammonia to the vial, you will notice a milky white percipitate form. This is the crack (or what ravers call freebase).
Step 5) Continue until you see no more precipitate form.
Step 6 - OPTIONAL) Ether is not nessisary, but if your so inclined add the ether to the vial. The crack precipitate is not soluable in water but it is soluable in the ether. This step ensures greater purity. But its not nessisary.
Step 7) Spyphen off the white layer of precipitate (that will be floating on the top) off with an eyedropper, or pipette, or whatever fits your fancy. If you used ether, syphen off the ether layer.
Step 8) Put it on a clean dry surface and let the precipitate dry. Scrape up the substance after it drys. This is your crack. If you want to be creative you could put the precipitate into molds and make some nice crackrocks.
HOW TO MAKE CRACK (A primer by Deus. v1.0)
First you will need:
1) Stove
2) Ammonia - ***IMPORTANT*** CLEAR AMMONIA!
3) glass vial
4) small jar to hold vial (babyfood works well)
5) eye dropper
6) distilled water (preferable)
Step 1) Ok, take your coke and disolve it in a few mL of water (you don't need much, but make sure the coke is fully disolved) in your vial.
Step 2) Fill your small babyfood jar with water and put it in a pan on the stove thats also filled with water. Put your vial filled with coke+water in the babyfood jar.
Step 3) Heat the solution until its warm/hot but not so hot that it would hurt to put your finger in it.
Step 4) Add drop by drop ammonia to the vial, you will notice a milky white percipitate form. This is the crack (or what ravers call freebase).
Step 5) Continue until you see no more precipitate form.
Step 6 - OPTIONAL) Ether is not nessisary, but if your so inclined add the ether to the vial. The crack precipitate is not soluable in water but it is soluable in the ether. This step ensures greater purity. But its not nessisary.
Step 7) Spyphen off the white layer of precipitate (that will be floating on the top) off with an eyedropper, or pipette, or whatever fits your fancy. If you used ether, syphen off the ether layer.
Step 8) Put it on a clean dry surface and let the precipitate dry. Scrape up the substance after it drys. This is your crack. If you want to be creative you could put the precipitate into molds and make some nice crackrocks.
Just FYI the reason the baking soda method is aweful is because some of your crack will have baking soda in it, you smoke that your gonna be burning organic compounds and getting a lot of carbon and other crap in your lungs. Much nastier crack! Ammonia evaporates away. Done correctly, you can have a very nice, pure base. (Not nessisarily pure coke base, cause who knows what it was cut with, you might have also basified some of the cut, you can never be certain, but this is the case with baking soda too)
pssssht... stove and shit. that was the 80s.
microwave. pyrex measuring cup. whatever ratio you want of soda and coke, 1 g soda 7 g coke is fire... place soda, coke, water in microwave. microwave for a while, say 2 min, whatever. remove the pyrex from the microwave. let it fucking sit there until the shit settles on the bottom. itll get hard. get rid of the water. its easy.
what the fuck people talkin about stoves for? microwave, like us six figga niggas do.
microwave. pyrex measuring cup. whatever ratio you want of soda and coke, 1 g soda 7 g coke is fire... place soda, coke, water in microwave. microwave for a while, say 2 min, whatever. remove the pyrex from the microwave. let it fucking sit there until the shit settles on the bottom. itll get hard. get rid of the water. its easy.
what the fuck people talkin about stoves for? microwave, like us six figga niggas do.
Oh, I'm sorry, I was under the impression that he wanted pure base.... As opposed to smoking baking soda with it.... My mistake! Use the baking soda method if you want crap base, or use my method if you want good base. The method I instructed is really easy to follow, if you can't follow it, then perhaps you have no business doing drugs in the first place.