• N&PD Moderators: Skorpio | someguyontheinternet

Cocaine *Extraction* Alkaloid from organic rubber - Re-purification to Cocaine HCL **

there steps seem to be leave the thing to dissolve in DCM for days on end ammonia and HCL must be used as sort of changing it between freebase and salt and acetone for a purification final product looked really pure. Those viet dudes had kgs of cocaine in that police bust from the suitcase extracted.
 
I highly recommend NOT adding liquid acid dropwise, no matter how it’s done it’ll contain too much water which will convert most or all of the cocaine to the nearly inactive benzoylecgonine. Learned this lesson the hard way, the solvent needs to be dried before addition of acid and best to either drip in a dried acetone/HCl solution or gas with dry HCl gas.

-GC
 
Good evening,

Swim2222 here,

Lovley to be with you finally - long time lurker and peaker/short time member loving it already.

I’d like to open my show with a bang and would like to know if one would be so kind or able as to pick one or more of the Bluelight.org scientists or long time psyconaughts minds;

Here it goes:

*swim had a beautiful Christmas Day experience with some supreme Cocaine HCL completely smashing time - and it was all down to a unique bit of one might say organic rubber* material!

This magic material had been made in the jungle of peru and had been sent over to swim 🏊‍♀️ in two 8g blocks, that person whom had this sent over had extracted from this the purest product one had ever tried, it literally was a pure unencumbered bout of blow ones socks off at a speed of 400million light years with complete focus.

The problem that Swim had is that the gentleman whom was a Sherpa (from swims mountain climbing days in the andies) the magical Peruvian has taken back with him his secret of extracting this Cocaine HCL from the starting material.

What swim can remember of the time is that a pH meter was of most importance and solvents were most definitely used - but swim allowed the ‘magic man’ to do his magic and he did At the same time as gifting me one more of these smokey smelling almost burnt rubber 8g blocks of heaven, I have pictures, videos and potential even a ‘ample’ for magicians to work upon.

Any help of what he done would be fantastic and I am here to upload and discuss everything and anything to help assist this.

Peace and Love in this major shift.

Swim2222
Did they find a solution? I have a similar case
 
Fascinating stuff. Really cool to see you all trying to figure out the enigma. I'm out of my depth here, but this is just ingenious to me.
 
So your coke is mixed in with the run er in either base or HCl form.

Rubber is soluble in most hydrocarbons and non polars.

Turpentine, naphta, benzene or acetone.
As is free base cocaine.

Rubber is water in soluble. But coke hcl is very water soluble.

I would cut the rubber into as many small bits as you can. Soak it in lukewarm water let's imagine the 8g block contains what 2. 5 gram coke. So maybe.20ml water or more if necessary to cover all the rubber.

Strain. Evaporate on veryow heat. You probably have an impure cocaine powder

I doubt it's mixed with r rubber &as free bSe.

The fact you mentioned solvents and pH paper leads me to believe further purification is needed. Don't bother evaporating the last two pulls if this is the case throw your impure coke into the 2 pulls with water. Use more volume. End up after combining with 150 to 250mls.

After separating your rubber wash your water coke solution with the non polar solvent you are going to extract with. Not acetone. Ether is generally favourited for coke.

Throw away or rather save till finished in a jar labeled trash non polar wash.

Use a base ammonia or sodium (bi) carbonate till the PH of the now non polar washed wster reads alkaline 7 + to 14.
I'd say 12 is more than enough.

Extract with benzene, toluene, ether. Prob best to stick to the same solvent for washing and pulling.

Extract 3 times with one third the volume of solvent as you have water.

Not combine NP extracts.

Two options either dry and gas with dry HCl or possible better for cocaine extract (3 times) with aqueous hcl, combine, and slowly evaporate to leave pure cocaine hcl crystals /powder

A quick rinse with clean dry cold acetone could be useful if not clean enough or if you have added a little too much hcl.

Remove the heat as solvents (yes water and 10% hcl included) evaporate much more slowly so u don't burn your product.


Ya lucky sod😉🍀
 
So your coke is mixed in with the run er in either base or HCl form.

Rubber is soluble in most hydrocarbons and non polars.

Turpentine, naphta, benzene or acetone.
As is free base cocaine.

Rubber is water in soluble. But coke hcl is very water soluble.

I would cut the rubber into as many small bits as you can. Soak it in lukewarm water let's imagine the 8g block contains what 2. 5 gram coke. So maybe.20ml water or more if necessary to cover all the rubber.

Strain. Evaporate on veryow heat. You probably have an impure cocaine powder

I doubt it's mixed with r rubber &as free bSe.

The fact you mentioned solvents and pH paper leads me to believe further purification is needed. Don't bother evaporating the last two pulls if this is the case throw your impure coke into the 2 pulls with water. Use more volume. End up after combining with 150 to 250mls.

After separating your rubber wash your water coke solution with the non polar solvent you are going to extract with. Not acetone. Ether is generally favourited for coke.

Throw away or rather save till finished in a jar labeled trash non polar wash.

Use a base ammonia or sodium (bi) carbonate till the PH of the now non polar washed wster reads alkaline 7 + to 14.
I'd say 12 is more than enough.

Extract with benzene, toluene, ether. Prob best to stick to the same solvent for washing and pulling.

Extract 3 times with one third the volume of solvent as you have water.

Not combine NP extracts.

Two options either dry and gas with dry HCl or possible better for cocaine extract (3 times) with aqueous hcl, combine, and slowly evaporate to leave pure cocaine hcl crystals /powder

A quick rinse with clean dry cold acetone could be useful if not clean enough or if you have added a little too much hcl.

Remove the heat as solvents (yes water and 10% hcl included) evaporate much more slowly so u don't burn your product.


Ya lucky sod😉
 
Just read rest of thread realise my way will probably work fine but best to recreate what your friend did. Will weigh in more when I'm not on phone.

Listen to sekio in meantime he knows what he's talking about
 
Top