-
OD Moderators: Keif’ Richards | negrogesic
Cocaine Can I make some freebase with a g of coke?
- Thread starter Absente
- Start date
caseface99
Bluelight Crew
It doesn't matter how much you have. Someone correct me if i am wrong but "freebasing" involves using amonia and as i am not familiar with this i won't give any bad advice.
Making crack, which for all intents and purposes is essentially the same as freebase albeit lower quality however safer to make; involves baking soda which i am guessing is what you are talking about.
Take your coke, any amount will do a gram is more than enough, put it in a spoon, shot glass, or ideally a glass test tube - and add slightly less baking soda than you have coke. Make sure its baking soda not baking powder. Add enough water to moisten it all, stir it, then heat it up until it is at a slight boil for 10-20 seconds then stop. If there is still some liquid heat it up some more but don't boil it for too long at once. When there doesn't seem to be much liquid it all then let it cool for a bit until it hardens then scrape it out, chisel it out, whatever and enjoy.
I know this method is not "perfect" but it works, and pretty well from my experience. Depending on the quality of coke add slightly more baking soda and water and re cook it to make sure you don't waste any, a little extra baking soda won't hurt.
Also i am pretty certain there is a crack cooking megathread, im sure the baseheads in there will help you out.
Making crack, which for all intents and purposes is essentially the same as freebase albeit lower quality however safer to make; involves baking soda which i am guessing is what you are talking about.
Take your coke, any amount will do a gram is more than enough, put it in a spoon, shot glass, or ideally a glass test tube - and add slightly less baking soda than you have coke. Make sure its baking soda not baking powder. Add enough water to moisten it all, stir it, then heat it up until it is at a slight boil for 10-20 seconds then stop. If there is still some liquid heat it up some more but don't boil it for too long at once. When there doesn't seem to be much liquid it all then let it cool for a bit until it hardens then scrape it out, chisel it out, whatever and enjoy.
I know this method is not "perfect" but it works, and pretty well from my experience. Depending on the quality of coke add slightly more baking soda and water and re cook it to make sure you don't waste any, a little extra baking soda won't hurt.
Also i am pretty certain there is a crack cooking megathread, im sure the baseheads in there will help you out.
Yep you are right I was thinking of the baking soda method. I have absolutely no experience in this and every small detail would help. I actually may have a test tube but I definitely have a shot glass.
How should I boil it? Like just with a candle or something and how would I hold the small glass without it heating up and burning my fingers?
Also what is the difference between baking soda and baking powder?
How should I boil it? Like just with a candle or something and how would I hold the small glass without it heating up and burning my fingers?
Also what is the difference between baking soda and baking powder?
Last edited:
The Chemist
Bluelighter
- Joined
- Jun 17, 2008
- Messages
- 3,439
boil it under a candle, zippo lighter, anything with a steady flame.
wear gloves.
who cares, you want the orange box that says "Baking Soda".
wear gloves.
who cares, you want the orange box that says "Baking Soda".
caseface99
Bluelight Crew
You cook (food) with baking powder, baking soda is traditionally used as an odor absorber in refrigerators/freezers, cabinets, etc.
If you think your coke is lower quality use slightly less baking soda since its most likely already got some as a cut.
If you have some sort of kids chemistry set and thats why you have a test tube then it probably has something to use to hold beakers/test tubes or whatever. If it doesn't then yeah just wear gloves. FYI the reason for using a test tube is simply because it will created a nice "rock", so for intents and purposes if you can put water in it, and heat it up, then you can cook crack in it. Just think about size and how much coke you are using. A gram is definitely enough to cook in a small shot glass.
Also, don't put your face right above it while its cooking, you wouldn't want to get any half cooked crack in your eye from a bubble bursting or something now would you.
If you think your coke is lower quality use slightly less baking soda since its most likely already got some as a cut.
If you have some sort of kids chemistry set and thats why you have a test tube then it probably has something to use to hold beakers/test tubes or whatever. If it doesn't then yeah just wear gloves. FYI the reason for using a test tube is simply because it will created a nice "rock", so for intents and purposes if you can put water in it, and heat it up, then you can cook crack in it. Just think about size and how much coke you are using. A gram is definitely enough to cook in a small shot glass.
Also, don't put your face right above it while its cooking, you wouldn't want to get any half cooked crack in your eye from a bubble bursting or something now would you.
My mom is a chemist so we have random test tubes and beakers and stuff laying around. How do I know when the crack is done and is the whole thing smokabe? I read some other guide that talked about precipitates forming at the top and removing those than washing with water but I have no idea what that means.
caseface99
Bluelight Crew
That was most likely referring to freebase, which is a bit more difficult and much less safe especially if done in correctly, for a new crack cooker just stick to baking soda. You will know its done when it has hardened, just poke it to find out. when you are done heating it, it may still feel moist when you poke it but that doesn't mean it needs to be heated more. Heating it too much could end up wasting it by "vaporizing" what is done cooking. Heat it until it is just slightly still moist then leave it to dry for 15 or so minutes, if it hasn't hardened then heat it ever so slightly more.
me9943
Greenlighter
i've had that same problem :/ try a toothpick or a pencil. but ideally it should be hard enough so that if you tap it loose it would fall out.
I thought cocaine couldn't be smoked. Isn't that kinda the point of crack?
titicaca2
Bluelighter
Don't do it. You'll fuck it up and waste all your coke. We've tried it millions of times, something always goes wrong. If the oily residue does rise to the top somehow it gets fucked upon extraction or something. Tried all sorts of ways, including the no heat method of LeJunk. NEVER EVER WORKS. Guess I need a living example and someone to show me. I'm pretty damn resourceful and can usually make shit work. Not crack though.
For the best I'm sure.
For the best I'm sure.