Hello everyone, I posted this method on Topix, and I figured I would post it in a few other places.
I discovered this a while ago, and I wanted to share it with everyone.
EDIT::
EVERYONE REMEMBER!!
This is HARM REDUCTION!
This guide is for the purpose of removing the gel compound to make it a little safer to use.
BUT, When using this method for IV, remember, there is always a little gel left, even though it works.
So it DOES WORK YES, but I don't recommend it because you never know what long term damage your doing.
So just please be careful.
Always use sterile equipment when IV'ing... just... be safe darn-it!
GENERAL TOOLS REQUIRED FOR BOTH:
Tool 1.) A tool for grinding the OP tablets into fine powder such as a Dremel or Pedi-Paws..
-- A sandpaper or hand file will work, but it will take much longer.
-- But, do not use a PedEgg or Cheese grater, as the holes are too far apart and there will still be some chunks.
Tool 2.) Microwave with window that you can see through pretty well.
-- It's important you can see inside the microwave as it cooks, as you must watch the Oxy cook the WHOLE time.
Tool 3.) A refrigerator or freezer for cooling final product
Tool 4.) A ceramic or glass plate to cook the OP OxyContin on
-- Also important, Ceramic cooks slower - Glass is faster.
-- BEGINNERS: I recommend using a ceramic at first, until you get good enough to use glass and cook fast.
-- This will not make your kitchen/house smell like chemicals or anything, any smell is a sweet Oxy-like smell that goes away immediately --
Method for Snorting OP OxyContin Tablets:
STEP 1: Grind pill into FINE powder with grinding tool (Note: Tool 1)
STEP 2: Put onto a microwave-safe plate (Note: Tool 4) and spread the powder out. Don't spread it too much, but don't leave it in a mound or pile.
STEP 3: Microwave for:
Ceramic: 6 to 10 minutes
Glass: 4 - 7 minutes
-- WATCH THE PLATE THE WHOLE TIME, DON'T TAKE YOUR EYES OFF FOR LONGER THAN A SECOND OR IT COULD BURN!
-- Cooking time varies. Depending on type of plate and microwave.
-- Glass cooks faster, but beginners should use ceramic.
STEP 4: As soon as you see the OxyContin starting to turn a golden-brown color, turn off the microwave.
-- Almost ALL of the powder must be golden-brown; I mean if there are a FEW white flakes left, your OK.
STEP 5: Now, place into your freezer or refrigerator* for:
-- Freezer: 7 - 12 minutes
-- Refrigerator: 18 - 25 minutes depending how cold it is inside
-- Freezer FOR IV: 5 - 7 minutes
--*I REALLY recommend using a freezer, it works faster. BUT, a fridge may take longer, but produce less condensation on the plate.
-- Matter of opinion I guess, or if you don't have a freezer..
STEP 6: Carefully pull the plate out of the freezer and place onto the counter.
STEP 7: NOW, Check the plate for condensation. If the plate is wet, CAREFULLY use a paper towel and dry it around WITHOUT wiping the Oxy.
-- PLEASE be careful when drying the plate. Dry it well, but at the same time, be careful,
-- not to wipe any of the Oxycontin.
Step 8: Now, using a razor blade or a flat(ish) knife, CAREFULLY scrape the crusted brown OxyContin up.
-- IF INJECTING/BANGING/IV: AFTER SCRAPING, READ BELOW STARTING AT IV STEP 1!!!
-- IF SNORTING, FOLLOW THE REST OF THESE SNORTING STEPS...
Step 9: Now, you will NOT be able to get it back into a fine powder, BUT, using the razor or knife, carefully chop up the Oxy as BEST you can.
-- You will most likely get it into small or even tiny chunks.
-- Now it will be perfectly sortable.
-- You can even TASTE a little bit, to see that it does NOT gel up in mouth or nose.:-{D
Step 10: Put into lines. I recommend an EQUAL amount for each nostril, but it's up too you.
Step 11: Blow your nose REALLY well, and then dry your sinuses using twisted up TP/kleenex.
Step 12: Now SNORT AND ENJOY!!
NOTE: It will probably (depending) take a few minutes to kick in.
-- IV METHOD BELOW --
I discovered this a while ago, and I wanted to share it with everyone.

EDIT::
EVERYONE REMEMBER!!
This is HARM REDUCTION!
This guide is for the purpose of removing the gel compound to make it a little safer to use.
BUT, When using this method for IV, remember, there is always a little gel left, even though it works.
So it DOES WORK YES, but I don't recommend it because you never know what long term damage your doing.
So just please be careful.
Always use sterile equipment when IV'ing... just... be safe darn-it!
GENERAL TOOLS REQUIRED FOR BOTH:
Tool 1.) A tool for grinding the OP tablets into fine powder such as a Dremel or Pedi-Paws..
-- A sandpaper or hand file will work, but it will take much longer.
-- But, do not use a PedEgg or Cheese grater, as the holes are too far apart and there will still be some chunks.
Tool 2.) Microwave with window that you can see through pretty well.
-- It's important you can see inside the microwave as it cooks, as you must watch the Oxy cook the WHOLE time.
Tool 3.) A refrigerator or freezer for cooling final product
Tool 4.) A ceramic or glass plate to cook the OP OxyContin on
-- Also important, Ceramic cooks slower - Glass is faster.
-- BEGINNERS: I recommend using a ceramic at first, until you get good enough to use glass and cook fast.
-- This will not make your kitchen/house smell like chemicals or anything, any smell is a sweet Oxy-like smell that goes away immediately --
Method for Snorting OP OxyContin Tablets:
STEP 1: Grind pill into FINE powder with grinding tool (Note: Tool 1)
STEP 2: Put onto a microwave-safe plate (Note: Tool 4) and spread the powder out. Don't spread it too much, but don't leave it in a mound or pile.
STEP 3: Microwave for:
Ceramic: 6 to 10 minutes
Glass: 4 - 7 minutes
-- WATCH THE PLATE THE WHOLE TIME, DON'T TAKE YOUR EYES OFF FOR LONGER THAN A SECOND OR IT COULD BURN!
-- Cooking time varies. Depending on type of plate and microwave.
-- Glass cooks faster, but beginners should use ceramic.
STEP 4: As soon as you see the OxyContin starting to turn a golden-brown color, turn off the microwave.
-- Almost ALL of the powder must be golden-brown; I mean if there are a FEW white flakes left, your OK.

STEP 5: Now, place into your freezer or refrigerator* for:
-- Freezer: 7 - 12 minutes
-- Refrigerator: 18 - 25 minutes depending how cold it is inside
-- Freezer FOR IV: 5 - 7 minutes
--*I REALLY recommend using a freezer, it works faster. BUT, a fridge may take longer, but produce less condensation on the plate.
-- Matter of opinion I guess, or if you don't have a freezer..

STEP 6: Carefully pull the plate out of the freezer and place onto the counter.
STEP 7: NOW, Check the plate for condensation. If the plate is wet, CAREFULLY use a paper towel and dry it around WITHOUT wiping the Oxy.
-- PLEASE be careful when drying the plate. Dry it well, but at the same time, be careful,
-- not to wipe any of the Oxycontin.
Step 8: Now, using a razor blade or a flat(ish) knife, CAREFULLY scrape the crusted brown OxyContin up.
-- IF INJECTING/BANGING/IV: AFTER SCRAPING, READ BELOW STARTING AT IV STEP 1!!!
-- IF SNORTING, FOLLOW THE REST OF THESE SNORTING STEPS...
Step 9: Now, you will NOT be able to get it back into a fine powder, BUT, using the razor or knife, carefully chop up the Oxy as BEST you can.
-- You will most likely get it into small or even tiny chunks.
-- Now it will be perfectly sortable.
-- You can even TASTE a little bit, to see that it does NOT gel up in mouth or nose.:-{D
Step 10: Put into lines. I recommend an EQUAL amount for each nostril, but it's up too you.
Step 11: Blow your nose REALLY well, and then dry your sinuses using twisted up TP/kleenex.
Step 12: Now SNORT AND ENJOY!!
NOTE: It will probably (depending) take a few minutes to kick in.
-- IV METHOD BELOW --
Last edited: