• Select Your Topic Then Scroll Down
    Alcohol Bupe Benzos
    Cocaine Heroin Opioids
    RCs Stimulants Misc
    Harm Reduction All Topics Gabapentinoids
    Tired of your habit? Struggling to cope?
    Want to regain control or get sober?
    Visit our Recovery Support Forums

Cocaine IVing Vinegar!

High Kite

Greenlighter
Joined
Jun 20, 2010
Messages
47
Greetings,

Lately I have been getting some badly cut cocaine. The cut doesn't seem harmful but it doesn't dissolve all the way in water. It actually seems to absorb the cocaine/water solution and remains at the bottom. It probably accounts for 25% of the weight of cocaine (judging from the amount that's on the spoon).

My attempts at filtration have been ... wasteful. Sometimes the syringe will get clogged. :(

I am waiting on some citric acid but in the mean time I have some vinegar. I know that doing this is damaging to your veins, however, being somewhat thick skulled, I am going to do it anyways. What is a safe amount of vinegar for .30cc of water/coke solution? 5 units? 10?

Please answer me that as well as give me tips on how to filter crappily cut coke - I wasted about half of 2 grams the last time fucking around ... It was still alright, I got a heavy bell ringer a couple times but fuck was it ever a waste.
 
Cocaine HCl does not need vinegar to dissolve.. it should dissolve perfectly in water.
If you need vinegar/citric acid to dissolve it then you have crack..
Or just some bullshit that you definitely don't want in your veins.
 
Yeah, powder won't need any acid. What you're most likely trying to dissolve is whatever else was added.

Snort and get a new batch.
 
Sorry, let me rephrase.

This batch is uncommonly insoluable in water, The CUT is. There is plenty of good coke in there as I get a bell ringer from my typical amount. I've shot this batch before with no ill effects so it's ok.

What I am asking is 2 things:

1. How much vinegar can I use with 25 units of coke/water that wont burn me too bad? 5 units? 10?

2. How does one filter using badly cut coke, I try using a piece of a cotton ball, sometimes it'll plug up, other times I only get back half the liquid. What are typical ways people use to filter w/o that Micron Filter (dont have access to it).

One way or another, Im pumping this shit into my veins, I just want to do it in the most efficient, somewhat safe manner possible.

Thanks,
 
I don't think you understand. cocaine WILL dissolve in water, anything you're seeing thats still in there, is not cocaine.

if you're getting bell ringers, then you're doing it right. you do not need vinegar or citric acid.
 
Cocaine HCl does not need vinegar to dissolve.. it should dissolve perfectly in water.
If you need vinegar/citric acid to dissolve it then you have crack..
Or just some bullshit that you definitely don't want in your veins.

this...HCl >vinegar
 
What I am asking is 2 things:

1. How much vinegar can I use with 25 units of coke/water that wont burn me too bad? 5 units? 10?

2. How does one filter using badly cut coke, I try using a piece of a cotton ball, sometimes it'll plug up, other times I only get back half the liquid. What are typical ways people use to filter w/o that Micron Filter (dont have access to it).

One way or another, Im pumping this shit into my veins, I just want to do it in the most efficient, somewhat safe manner possible.

Thanks,
1. You only need water to dissolve it if its cocaine HCL. (aka 99.999% of what you find on the street - not crack). So no vinegar is needed, just water.

2. Without a micron filter, cotton filtering (double filtering, ideally) is key. Or even an acetone wash with cocaine if you want to go even further. Someone around here could show you a nice technique to filter using only rigs, cotton, and coffee filters. I've leave it up to someone else.



this...HCl >vinegar

^ But what she's saying is that applies to make cocaine freebase (crack) into its water soluble form, a cocaine salt. With plain Cocaine HCl, no acid is needed. Water is all you need to dissolve it. HCl (very very dilute), plain white distilled vinegar (acetic acid), ascorbic acid, or citric acid are those best use to make crack (which is not water-soluble), ready for shooting in water (water-soluble).
 
Is "Double filtering" as easy as filtering it once through the cotton ball, injecting it into another spoon and then using another cotton ball (matchhead size) to filter it again?

My problem with this is I always loose like 1/4 to 1/2 of the solution somewhere in the process.

The cut that lays on the bottom has soaked up quite a bit of liquid I am thinking - There is still plenty of good coke in my stuff, it's just that the cut in this batch is different - it wont last long but alas, I am still determined to push and I want the MOST of what I am doing, that is why, with the knowledge that this cut isn't doing me much short-term damage from experience, I am suggesting vinegar might break down the cut so the whole spoon would ONLY be filled with clear liquid. I know the difference between crack and coke, guys... but I am sorry for the confusion.

Once again, my goal is to dissolve this cut so I don't waste the liquid that has absorbed into the cut in the bottom of the spoon, worry about clogging my syringe. I know this isn't the best practice and I wouldn't do it long-term.

It's either that or a better filtration method that doesn't waste.
 
Yes, double filter = filter twice in a row. You will lose a little. Make sure you apply a lot of pressure to the cotton as you draw up to get every last drop of goodness into the rig. And if the tip of the rig rubs on the spoon/cooker too much and dulls, backload that into a fresh syringe before using it to IV.


Look on the internet for micron filters (ones that fit luer lock syringes - i think you want the .22micron variety). They aren't hard to find and and a miracle for people shooting street drugs/pills.
 
You sure you're not getting crushed up crack? You sure it's even coke you're getting???

If it's crack you CAN use distilled vinegar. Just use the LEAST amount needed while the "crack" is floating in the water in your spoon under heat. Best to use citric or better yet pure ascorbic acid (Vitamin C). A LOT less harsh on your veins. Vinegar BURNS. So does HCL b/c most people always have a tendency to use too much. If you decide on hydrochloric (muriatic) acid that is usually sold at either 31.5% or 32% concentration, make sure to dilute it down a bit to perhaps 5% or 10% at most. And remember, you want to add an acid TO water, not the other way around. Consider this a safety precaution.
 
Make sure you apply a lot of pressure to the cotton as you draw up to get every last drop of goodness into the rig.

usually, I wash my hands real good with some foam soap I got from the hospital, and pick the cotton out, hold it to where the part not touching in the spoon is facing me, and I'll squeeze the filter between thumb and index while pulling the plunger with my teeth to dry the filter. you can either then, throw the filter back in the spoon to get the more of the wetness out, or just throw another cotton in and draw up like your normally would. but know this, you're never gonna get it completely dry, and I bet you're already getting it as dry as one can without letting it sit and airdrying.

I shoot my morphine pills and there is always damp pill shit in the spoon when done. you just cant get it all bud.
 
It hurts. It's not good on the veins. But if you're looking for an upside it's sterile.
 
i know what yer sayin about the cocaine u got bro...ive been asked that alot....ive been asked that alot about crack too..they thought it was cocaine being a beginner. being good cocaine isnt powdered down..and the being new to the stuff had alot to do with that. my friend...whom is prolly gonna see this post asked me if he could serisously...just snort crack...like an 8 ball....? lol it happenes...but u should definatly do research on what ur doin.

it sounds like u said it...u just want the rest of the dope/liquid thats absorbed up in the cut...after u suck the dope in the syringe...add more water...just a fuckin nut drop not even...smash the cut pile of shit with a clean end of a new rig...needle whatever...smash the fuck out of it and draw it up with the other....then do as they say squeeze the shit out of the filter....i dont do all this.w ether im shootin 500$ in crack...or cocaine. i never buy less than 500 for 1 night personal use....usually its being crack lately...but this is better thn most peoples cocaine for IV anyhow. so there. but anyhow it doesnt matter so...and to answer filtering. u do lose some...expect it...add more to get away from losing too much so it makes nothing in the end result...learn to judge it i guess....i dont try to fuckin rape the shit out of the dope. i do this 2 times a month...sometimes once...500$ gram per gram no deals...good cocaine...im not advertising..im not looking for a conect or customers...dont ask, or offer. thanks
 
^I'm fairly certain this post is actually very informative and answers all your questions perfectly OP, despite it's language limitations.

Basically you can wash the remaining cut (with it's moistness that you don't want to lose) with more water to extract more of the cocaine salt.
 
1. put your powder in a small glass container, add a little water
2. Add a few drops (depends on how much powder is there) of HCl
3. Heat until dissolved
4. boil off water, or however you want to dry it out**** IF ITS DRY, ANY EXCESS HCl WILL EVAPORATE

hcl is safer than other acids cause its a gas dissolved in water and will evaporate completely if the powder is totally dry
 
Ready for the solution? here it is-

take your cocaine, put it in (cool) water. swish it around a lil' to make sure the actual cocaine is dissolved in it. heres the magic - take the mixture and pour it through a coffee filter. the solids that stay in the coffee filter are non water soluble cuts.

then you are free to add ammonia and you'll (most likely) have killer crack!

as far as the vinegar, just use distilled white, put it in your cooker with just as much vinegar as necessary, use your cap and crunch down the crack, NO NEED TO HEAT! have fun!!! be safe!!! one tenth of crack will get your bell ringing my friend..!
 
Is "Double filtering" as easy as filtering it once through the cotton ball, injecting it into another spoon and then using another cotton ball (matchhead size) to filter it again?

My problem with this is I always loose like 1/4 to 1/2 of the solution somewhere in the process.

The cut that lays on the bottom has soaked up quite a bit of liquid I am thinking - There is still plenty of good coke in my stuff, it's just that the cut in this batch is different - it wont last long but alas, I am still determined to push and I want the MOST of what I am doing, that is why, with the knowledge that this cut isn't doing me much short-term damage from experience, I am suggesting vinegar might break down the cut so the whole spoon would ONLY be filled with clear liquid. I know the difference between crack and coke, guys... but I am sorry for the confusion.

Once again, my goal is to dissolve this cut so I don't waste the liquid that has absorbed into the cut in the bottom of the spoon, worry about clogging my syringe. I know this isn't the best practice and I wouldn't do it long-term.

It's either that or a better filtration method that doesn't waste.

So let me get this straight, you essentially want to make water insoluble cuts dissolve just so you can get 'the most' out of your coke? What a fantastic idea, hell why filter at all, nothing is safer than Iving solids, not like they can kill you or anything. My favorite part of this idea is using the cooking vinegar, jeez what a rush that must be to IV!
 
Top