Attempt #2 to obtain real MDMA: here are my test resuls, WTF is this?

[glittergal7]

So yesterday I posted test results for some "molly" I got. The test results seemed to point toward methylone maybe with something else thrown in. I wrote about my experience on it in that thread also. Basically long story short it had a lot of similar effects as MDMA except I was very lazy and had no hyperactivity or real stimulation to get up and dance like I usually do. Also, the whole experience was very short. I dropped at 1030pm and was 100% completely sober by 2 am ish and was able to SLEEP by 3am. Very disappointing experience. In the past I was able to drop mdma at 930am and not feel sober until 3-4am.

So I got my hands on another molly from someone else. Unfortunately it looks like an off white powder with no crystals or rocks so I am already sketchy because powder is more easily cut.

So here are my test results:

1.) Marquis
2.) Mandelin
3.) Mecke

What do you guys think this is? The Marquis looks positive for methamphetamine.

Marquis

Here's another image I found of Marquis results:

Mandelin

Here's another Mandelin result:

Mecke

Couldn't figure this one out.

 

[nastypoker]

Well....it doesn't look like MDMA

 

[epic11]

All you need to know is that did NOT test positive for mdma. Looks methy. Throw away.

 

[glittergal7]

All you need to know is that did NOT test positive for mdma. Looks methy. Throw away.

Sigh.. This sucks.. I tried twice to get MDMA this weekend. First time was probably methylone or something. I ended up taking it and it was totally bunk. Whatever was in it definitely mimicked the effects of MDMA but only lasted a very short time. Second attempt was a total fail too. We didn't take these though.

Anybody have any tips on how to try to get actual MDMA? I know I've gotten it in the past but it really seems like a total russian roulette with what I am going to get and it sucks wasting money on pills that turn out to be garbage especially since we buy 6-8 at a time.. so spending *snip no prices* on molly then finding out its not actually MDMA totally blows. The issue is that whenever we ask for molly, there are a million middle men who are probably as clueless as I am about whats in it. It literally goes through a dozen hands before it gets to me. Sigh. I'm from NJ and whatever we get probably comes out of NYC.

 

[Jackeh]

Learn to make it yourself, if you do it right you are assured to have the best MDMA you have ever tried.

 

[Clocktower]

Ask to test it before you buy it. Doesn't take much, and if the dealer doesn't want it tested, then you don't want to buy it.

 

[glittergal7]

Ask to test it before you buy it. Doesn't take much, and if the dealer doesn't want it tested, then you don't want to buy it.

I would ideally do this but the person I get it from probably doesn't even know if it's really MDMA or not? When I got these, the guy claimed he took them last night and they were good... but none of these people are actually making it or getting it directly from the person who makes it unfortunately.

 

[Grinders Kiefers]

Learn to make it yourself, if you do it right you are assured to have the best MDMA you have ever tried.

I'm sure we all wish we had the resources and know-how to do this but it's just not feasible for the vast majority of users.

 

[Jackeh]

The equipment you need is just glassware for measuring, and stands for holding the glassware. Both of which can be ordered online for cheap (beakers for £2.50) or expensive (£23.00). The only specialised equipment you might need is distillation apparatus like a condenser and distillation adapter.

Most of the chemicals are common and can be bought and extracted from products in DIY stores using the distillation apparatus (if you can't find them online).

 

[blauwlicht]

The equipment you need is just glassware for measuring, and stands for holding the glassware. Both of which can be ordered online for cheap (beakers for £2.50) or expensive (£23.00). The only specialised equipment you might need is distillation apparatus like a condenser and distillation adapter.

Most of the chemicals are common and can be bought and extracted from products in DIY stores using the distillation apparatus (if you can't find them online).

Well, maybe you could write a how-to for all of us

 

[Jackeh]

There are already ones made, but I've heard that discussion like that isn't allowed on BL. :C

Would mods mind if I sent you a link to a resource via PM? I don't want to get on the wrong side of staff when I've only been here a short while.

 

[Folley]

The equipment you need is just glassware for measuring, and stands for holding the glassware. Both of which can be ordered online for cheap (beakers for £2.50) or expensive (£23.00). The only specialised equipment you might need is distillation apparatus like a condenser and distillation adapter.

Most of the chemicals are common and can be bought and extracted from products in DIY stores using the distillation apparatus (if you can't find them online).

I HIGHLY advise anyone to dismiss this claim. It's not true in the least.


For one, you need a large number of controlled and restricted chemicals that you most likely will never be able to find.
For two, you need a large amount of VERY expensive equipment, not just a few beakers and a condenser coil. Buying any of this equipment without a license WILL bring government attention to you, this is why they set up watch lists on these things.
For three, chemistry can be very dangerous if you don't know what you're doing and someone can risk serious injury or death trying to do this. Lab explosions are very common.
Fourthly, any MDMA made by a shitty amateur will be of AWFUL quality. It will be so full of impurities it's likely to make you extremely sick and do quite a bit of neurological damage as well.



What you are suggesting is dumb on all levels dude. The average user can't just whip up a batch of MDMA like a cake, it takes a bit more skill than that.

 

[glittergal7]

I HIGHLY advise anyone to dismiss this claim. It's not true in the least.


For one, you need a large number of controlled and restricted chemicals that you most likely will never be able to find.
For two, you need a large amount of VERY expensive equipment, not just a few beakers and a condenser coil. Buying any of this equipment without a license WILL bring government attention to you, this is why they set up watch lists on these things.
For three, chemistry can be very dangerous if you don't know what you're doing and someone can risk serious injury or death trying to do this. Lab explosions are very common.
Fourthly, any MDMA made by a shitty amateur will be of AWFUL quality. It will be so full of impurities it's likely to make you extremely sick and do quite a bit of neurological damage as well.



What you are suggesting is dumb on all levels dude. The average user can't just whip up a batch of MDMA like a cake, it takes a bit more skill than that.

Random but then who/where is the MDMA being made?

 

[Niggasbebuggin]

I HIGHLY advise anyone to dismiss this claim. It's not true in the least.


For one, you need a large number of controlled and restricted chemicals that you most likely will never be able to find.
For two, you need a large amount of VERY expensive equipment, not just a few beakers and a condenser coil. Buying any of this equipment without a license WILL bring government attention to you, this is why they set up watch lists on these things.
For three, chemistry can be very dangerous if you don't know what you're doing and someone can risk serious injury or death trying to do this. Lab explosions are very common.
Fourthly, any MDMA made by a shitty amateur will be of AWFUL quality. It will be so full of impurities it's likely to make you extremely sick and do quite a bit of neurological damage as well.



What you are suggesting is dumb on all levels dude. The average user can't just whip up a batch of MDMA like a cake, it takes a bit more skill than that.

Well put Folley.
Let's just leave this one to the professionals, and find a better source for your stuff instead of getting shitty shit mate.

 

[glittergal7]

no sourcing as per forum rules.


i'd say the location isn't the problem


apparently, most is manufactured in the netherlands and in belgium. there's some local production as well.

I had a feeling location wasn't an issue. I guess I just have bad luck right now and will have to keep looking around. It's just annoying because I can't exactly go to a dealer and say "let me test one pill and if it's good, i'll buy a bunch" and expect that to work because apparently the connects are as clueless as I am about what's in them.

On another note, for anyone who stumbles upon this thread later with possibly similar testing results - my friend took a chance and consumed a pill and she said it was similar to MDMA but much more speedy so I'm thinking it was something methy.

 

[matt2012]

The equipment you need is just glassware for measuring, and stands for holding the glassware. Both of which can be ordered online for cheap (beakers for £2.50) or expensive (£23.00). The only specialised equipment you might need is distillation apparatus like a condenser and distillation adapter.

Most of the chemicals are common and can be bought and extracted from products in DIY stores using the distillation apparatus (if you can't find them online).

If you think for one second that all you need is glassware and a MDMA "recipe" you got off the internet to make MDMA then you certainly havn't done any research on the subject. it is next to impossible for a person with little or no chemistry knowledge or training to make MDMA. the quick and easy routes are impossible to do now because the feds watch all the chems and precursors needed. you are stuck making your own reagents and extracting esential oils from plants. you can't just go and buy a gallon of safrole without bringing the heat down on you with the quickness. you need 100s if not 1000s of dollars worth of equipment and need to understand multiple chemistry disiplines. it takes hours upon hours to complete and can be very dangerous

The easiest snyth I have found takes days and you have to fassion all the reagents and precursors yourself and even then you end up with MDA...good by itself but you have to do even more work to convert that to MDMA.

If it was so easy...don't you think we would all be synthing our own instead of buying it? your post is the very inverse of harm reduction.