• 🇬🇧󠁿 🇸🇪 🇿🇦 🇮🇪 🇬🇭 🇩🇪 🇪🇺
    European & African
    Drug Discussion

    Welcome Guest!
    Posting Rules Bluelight Rules
  • EADD Moderators: axe battler | Pissed_and_messed

European Crack Cocaine Thread

yeah its the exact same bottle as the one i have, my only issue is i'm at a total loss as to how to create the hole(s) without shattering the bottle
 
keeping said:
yeah its the exact same bottle as the one i have, my only issue is i'm at a total loss as to how to create the hole(s) without shattering the bottle
Click to expand...


Burn the bottom with a clipper lighter then tap it with a phillips screwdriver and it should start to chip away at the glass, eventually creating a hole
 
thecamelduluxe said:
Burn the bottom with a clipper lighter then tap it with a phillips screwdriver and it should start to chip away at the glass, eventually creating a hole
Click to expand...

I can't believe I'm making such a meal of this...I've been tapping my (correct miniature bottle) on & off since yesterday, from the outside, because although the glass will fall in the bottle, I thought it was easier to hit the spot accurately from the outside (I even took the bottle to score with me, hoping 'the man' would be a dab hand & do it for me! Alas there was no such offer, but he did say he taps it from the inside)
So do you tap with the Phillips from inside or out?
Any answers? (And believe me, I've read every bloody post on the matter through this thread & the links from it)
Suffice to say, I'm having a premature holiday from my crack holiday and am determined to get this bottle hole right, as my (borrowed) glass pipe has been retired as it was about to explode on my mouth, and I'm so bored of all the water bottle detritus & ash production when I don't even smoke fags

Several hours later: Finally cracked it (from the outside) after hours of frustration, think my hole's too small though, FNAAAR and I'm not impressed with my assembly at all. Back to the water bottle for the last bit & the silver lining of being fed up with it all now and happy to be done with this binge
 
Last edited:
Been getting absolute shimmering rocks that are brittle to touch locally for ages always dynamite when I washed back 0.8 earlier I was left with .6 of the strongest stuff I've made yet! All one cloud of oil in the spoon redid each spoon 3x with a bit more water no more bicarb only put .2 of bicarb into the .8 of coke and it came back like a clear bullet. Still got some left as after the .6 I washed up another .3, cheeky because the stuffs £600 a quarter but when the return from washing it back is good there's no sense snorting it wake up with a blocked nose and a come down ?
 
Small_town_casual said:
Quick question, a mate got some really stinky flake from his usual guy, not as shinny and a bit more yellowy. Now when he washed it up it didn't set to rock it stayed like an oily paste, anyone know why this would be? It's bang on to hoover but just doesn't want to rock up
Click to expand...


Seen stuff like this it's because whatever they've cut it with doesn't wash up probably creatine or something. It's a good way of never getting shit to say to any flake dealer first thing your gonna do is wash it back and if it's shit you want money back I find nobody bothers cutting it that way. Or if they're going to cut anyway they'll just refuse your custom cos they know it's bad press when someone takes a video of your stuff coming back at 30% for £100
 
Can the creatine be removed if the freebase is made with ammonia/ether rather than bicarb?
 
No idea I don't even know if that's what the cut is. Best bet is just find a new supplier. My reg guy gave me shite just once, didn't refund me so I've switched sources. Drug dealers are ten a penny and there is plenty of good coke in the uk if you know the right sorts.

I'm still going smoked an 8th since last night basically. I look normal but heads a ringing I'm getting too good at washing it back almsot feels more economical now than snorting ?
 
True, the HCl I get is pretty good to be fair. I have never washed any and smoked it but I do intend to give it a try soon.
I think I will use the ammonia though as I have some to hand.

Mind me asking what's your protocol for washing up ?

Cheers
 
I just put the flake in a spoon a desert spoon.

Add 1-2ml of water from a syringe.

Heat if it needs heated. If it's good it probably won't need heated.

Add 1/4 as much bicarb and burn it all around the spoon with the lighter until the bicarb fizzles off and your left with globules of oil on the top of the water.

Run a 5p piece through the globules and they all stick. What you have there is crack. You can repeat the process of adding more water and heating, sometimes a sprinkle more bicarb if it's not working but I get upto 3 lots off one spoon full say .5-.8 at a time.

Still getting pure bellringer hits second day on it!
 
Thanks for you reply but Sorry for my ignorance.

1. So I add 0.5g of cola to the spoon
2. Add 2ml water to the spoon
3. Heat spoon (not sure why as cola is very soluble in water)
4. Add 0.125g of bicarbonate of soda.
5. Run a 5p through the spoon and all the oil / crack will stick to the 5p? Do i then scrape the oil off the 5p and allow it to harden ?

thanks for your help I'm a complete novice
 
Yes but be sure all the bicarb has fizzled off you will see it bubbling up then burning off and your left with just water and oil on the top.

You giving it s try tonight?
 
Nah I can't in the week work dosnt allow im
afraid.

I have a cannabis oil pipe but that's not suitable for crack is it ? I need a straight glass pipe with steel wool in it ?

Sorry so many questions but I've actually not chatted with anyone with any decent experience lol
 
cLaTTeReD said:
Nah I can't in the week work dosnt allow im
afraid.

I have a cannabis oil pipe but that's not suitable for crack is it ? I need a straight glass pipe with steel wool in it ?

Sorry so many questions but I've actually not chatted with anyone with any decent experience lol
Click to expand...

TBH mate, what you don't know can't hurt you. Think long and hard before starting down that rocky road. It's very steep and usually only goes one way.
 
No I can't tonight as work won't allow.

I have an oil pipe but that's not suitable for crack is it ? I need a straight glass pipe with wire wool in the end ?

sorry for so many questions but not chatted with anyone with any experience smoking cola
 
Sorry for the repost I thought it had got lost.

I have read alot from people that say don't touch it with a barge pole but also info from people who says it's ok to have a go with it a couple of times a year
 
Never, in the field of drug piggery, was so much spent, by so many, for fuck all...
 
You must log in or register to reply here.
Top