Bluelight

Thread: How to cook and bang dilaudid?

Page 1 of 2 12 LastLast
Results 1 to 25 of 42
  1. Collapse Details
    Technique For 8mg Dilaudid 
    #1
    Needle
    I Have come across 10 of these bad boys http://www.pharmer.org/node/2286, I cooked em up just like I have been cooking up the Abbot 2 and 4mg Dilaudids. The technique being crush pill add 100 units of water add the slightest bit of heat(im really not talking much here) then throw the filter in and im sure sure you know the rest. I was just wondering if I am doing everything right here? and if I can use the same technique for the 8mg's which I have never had before, there seems to be more powder to them, and I just want to get the most bang for my buck. Oh and sorry if this question has been answered before I tried a search and came up with nothing useful.
     

  2. Collapse Details
     
    #2
    Bluelighter jykkE's Avatar
    Join Date
    Jan 2007
    Location
    Atlanta, GA
    Posts
    961
    With pills I don't add any heat whatsoever. 100 units of water is way too much as well, dilaudids will dissolve with much less.
    When I shoot dilaudid's, I just crush very finely, add 60 units of water, stir, filter, bang.
     

  3. Collapse Details
     
    #3
    Ex-Bluelighter Gaian Planes's Avatar
    Join Date
    Sep 2006
    Location
    ATL/asheville
    Posts
    11,144
    use a wheel filter! who knows whose grubby little fingers were on those things.
     

  4. Collapse Details
     
    #4
    Bluelighter wardf246's Avatar
    Join Date
    Apr 2007
    Location
    VA
    Posts
    134
    to get them into a fine powder i use a hose clamp works great 100unit seems to me an over kill maybe half that
     

  5. Collapse Details
     
    #5
    sounds fine except u dont need the heat at all

    also everyone keeps saying to use less water, but i like more water like you....
    with something as potent as hydromorphone, the less concentrated the solution the better that way any water that does get trapped in the pill gunk or lost in ur method contains less of the good shit.
    that way if u lose or spill a couple drops ur not losing MGs of hydrmorphone literally
     

  6. Collapse Details
     
    #6
    crush pill into powder. add 80-100u water. mix until powder is dissoved. filter twice with cotton. slam. rush.
     

  7. Collapse Details
     
    #7
    Bluelighter Phredom's Avatar
    Join Date
    Mar 2008
    Location
    nc
    Posts
    113
    crush/shave Verrrry finely, FILTER 2x, heat minimal- minimal water.

    enjoiii
     

  8. Collapse Details
     
    #8
    Bluelight Crew sixpartseven's Avatar
    Join Date
    Oct 2005
    Location
    Detroit
    Posts
    11,303
    Quote Originally Posted by samadhi_smiles
    use a wheel filter! who knows whose grubby little fingers were on those things.
    Good advice.

    That, and DO NOT heat them. Dilaudid is a relatively safe pill to shoot because of the limited amount of fillers and binders in it. Adding heat is just causing unnecessary particulate matter to dissolve, pretty much nulling the fact that Dilaudid is one of the safer pills to shoot.

    Plus, the majority of opiates (hydromorphone included) will dissolve readily in cold water, so heating it is just causing more harm than good, and at the very least, just wasting your time.
     

  9. Collapse Details
     
    #9
    i posted a thread about 2 days ago about shooting d's. it had everything you need to know. best advice i was given:

    from memphis10

    "this is exactly how you should do it:

    crush up your d
    put it in something like a 40oz beer cap or spoon, whatever works
    squirt around 40 units of water onto the crushed d
    use the rubber part of the plunger to stir it all around
    ball up a tiny little ball (think pea sized) of cig filter, cotton, q tip, whatever, wet it
    drop it into the d and water mixture
    press the tip of the needle into the cotton
    pull back all of the solution into syringe
    do the damn thang"

    although that is for a 2mg pill, the method should still be the same.
     

  10. Collapse Details
     
    #10
    Needle
    First of all I would like to say thanx to everyone who chimed in with advice, I really appreciate it. Without heating the whole process is easier, takes less time, and most importantly I seem to get more out of it. I just have a comment to make for every who was saying that I use to much water. With these 8mg pills I don't just shoot one I shoot anywhere between 2-4 so i require all the water. Is there any special technique for shooting more than one? I just crush it all up ad water and filter and....bliss.... So thnx again for the help and any more help will be greatly appreciated .
     

  11. Collapse Details
     
    #11
    Bluelighter chinacat311's Avatar
    Join Date
    Sep 2003
    Location
    giant spoon.
    Posts
    1,070
    no the technique is pretty much the same for shooting a bunch of pills. you might want to re-rinse the spoon after your first shot, just to be sure. (after you filter and shoot your main shot, put another 60-80 units of water in the spoon, stir, filter again, and shoot. you might get any left over dope this way.

    other than that, if you are doing this regularly you might just want to invest in some 2ml syringes. if you are shooting more than a couple of these at once 1ml is sometimes not quite enough. its nice to have the option but with a 2ml barrel you of course dont HAVe to use all 2ml, but again you have the option to if you happen to shoot more pills than usual.
     

  12. Collapse Details
     
    #12
    Bluelighter
    Join Date
    Oct 2006
    Location
    Canada
    Posts
    73
    I Just got 10 of these bad boys also. i have no opiate tolerance and was wondering how many MG should i start out with? i am thinking break them into 4 peices so theres 2mg each and do 1 to try first?
     

  13. Collapse Details
     
    #13
    Bluelighter LightTrailz's Avatar
    Join Date
    Mar 2006
    Location
    Ktown, Ontario
    Posts
    2,320
    if its your first time iving . then yes 2 mg should be fine . especially with no tolerance . For the 8mg i just normally cut them in half then make them in 2mg lines . when i get d's im in no rush to use them up because their hard to come by . but if i have a few ill be generous and do a 4 mg lines . just do to their availability. im hoping to be able to try bangin one of them but the oppourtunity hasnt arrose.
     

  14. Collapse Details
     
    #14
    Quote Originally Posted by Boogenhagen
    First of all I would like to say thanx to everyone who chimed in with advice, I really appreciate it. Without heating the whole process is easier, takes less time, and most importantly I seem to get more out of it. I just have a comment to make for every who was saying that I use to much water. With these 8mg pills I don't just shoot one I shoot anywhere between 2-4 so i require all the water. Is there any special technique for shooting more than one? I just crush it all up ad water and filter and....bliss.... So thnx again for the help and any more help will be greatly appreciated .

    because its hard to dissolve these pills into solution at times(especially more than one or two of them at once), i have a method that you may like although maybe a little more timely.

    instead of adding all the pills at once, get ur 100 units or so of water and do the process one at a time however keep using the same water! so after you draw up a solution from one or two of these 8mg pills, instead of injecting the solution in the syringe, use THAT solution to dissolve ur next pills.....make sense? u will use the same 100units of water to dissolve all the pills. this is easier than using a really large syringe at times and also i find that my shit doesnt clog up....sometimes i cannot pull a solution from more than one or two diliaduds dissolved at once! too many fillers/binders/etc it gets too sludgy....my method circumvents that.
     

  15. Collapse Details
     
    #15
    Quote Originally Posted by x_tyson_x
    I Just got 10 of these bad boys also. i have no opiate tolerance and was wondering how many MG should i start out with? i am thinking break them into 4 peices so theres 2mg each and do 1 to try first?
    2mg IVed would be a nice dose for someone with no tolerance. dont do more than that though.....
     

  16. Collapse Details
     
    #16
    Quote Originally Posted by chinacat311
    no the technique is pretty much the same for shooting a bunch of pills. you might want to re-rinse the spoon after your first shot, just to be sure. (after you filter and shoot your main shot, put another 60-80 units of water in the spoon, stir, filter again, and shoot. you might get any left over dope this way.

    other than that, if you are doing this regularly you might just want to invest in some 2ml syringes. if you are shooting more than a couple of these at once 1ml is sometimes not quite enough. its nice to have the option but with a 2ml barrel you of course dont HAVe to use all 2ml, but again you have the option to if you happen to shoot more pills than usual.

    read my method above, instead of using more water and larger syringes, you just take ur time and separately dissolve the pills using the same 100 units of water giving u an ultra potent solution! ive done this and dissolved over 24mg of diliadud into a single shot of 90 units of water...talk about a rush!
     

  17. Collapse Details
    How to cook and bang dilaudid? 
    #17
    Question
    I'm a sickle cell patient and get prescribed the 4mg hydromorphone's only these are a tan color over the white and are smaller than the generics. I've been reading on the site and I'd be lying if I said I didn't love the IV dilaudid. Been on everything from Demerol, Morphene(now allergic to it), and now I get OC's and dilaudid.

    So I tried it for myself the first time last night and thought it was as simple as crushing it up and putting it in water (Maybe I didn't use enough water?) I filtered and thought it would work. Gave myself the poke but only ended up with a sore little bump. Someone on here said they put 4 in a 1cc so I tried two in a 1/2 cc.

    So any help for a newbie to bang would be appreciated. I got one smoke left and nothing feels as good as a cigarette after an injection.
     

  18. Collapse Details
     
    #18
    Bluelighter Temeraroius's Avatar
    Join Date
    Sep 2008
    Location
    New Orleans
    Posts
    436
    I mean you can get around the same level of bioavailability (around 90 through snorting it so if you want a faster onset time and a better high just snort it.
     

  19. Collapse Details
     
    #19
    poppycock I say! iv is the fastest onset for anything period... no intention to flame you sir but i must disagree on your above post

    iv is bad though
     

  20. Collapse Details
     
    #20
    I mean I been snorting it but for the same reason as many, I like that rush
     

  21. Collapse Details
     
    #21
    Quote Originally Posted by Temeraroius
    I mean you can get around the same level of bioavailability (around 90 through snorting it so if you want a faster onset time and a better high just snort it.

    Bioavilibility of Hydromorphone intranasally is around 54.8% (Mean results). IV would be 100% bioavailability and quicker onset.

    That being said it is dangerous to inject pills but you have one of the safest to do so with...but you still shouldn't.

    If you change your mind:

    http://www.bluelight.ru/vb/showthread.php?t=75897



    IV Dilaudid is supposed to have a rush comparable if not better than that of heroin (I have never done Dilaudid myself), but the high is supposed to not last as long. So, if it is the rush you are going for you got yourself in the right situation. P.S. ALWAYS use Micron filters!
     

  22. Collapse Details
     
    #22
    Bluelighter THE_REAL_OBLIVION's Avatar
    Join Date
    Apr 2005
    Location
    I'm from Canada and they say I'm a little slow eh...
    Posts
    1,334
    Quote Originally Posted by yiggy
    read my method above, instead of using more water and larger syringes, you just take ur time and separately dissolve the pills using the same 100 units of water giving u an ultra potent solution! ive done this and dissolved over 24mg of diliadud into a single shot of 90 units of water...talk about a rush!
    24mg of dilaudid...now that's harm reduction
     

  23. Collapse Details
     
    #23
    ^and a death sentence to the newbie up above. How does someone with no opiate tolerance get their hands on dillies and I can't. [\rant]
     

  24. Collapse Details
     
    #24
    Bluelighter NW-baltiland's Avatar
    Join Date
    Jan 2008
    Location
    Not in baltimore. :-(
    Posts
    554
    It also seems that dilaudid builds a tolerance a lot faster than most opiates. I started shooting 2-4 mg's and by 9 months later was doing anywhere from 24-32 mg's about 5-6 times a day. It just doesn't give that long of a high, but the rush is INCREDIBLE.
     

  25. Collapse Details
     
    #25
    Thanks for the info, I am glad one person who saw this post responded with an answer I was looking for.

    I'm not looking to get talked out of it or how bad it is or what I should and shouldn't do...I already have appointments where I get to go in once or twice every two or three weeks just to sit on I.V. dilaudid for a few hours.

    I know about it, I can handle it, etc. etc. The type of pain I'm in I should be on it by I.V. 24/7

    No prices or self-incrimination please
    Last edited by Bob Loblaw; 21-07-2009 at 16:28.
     

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •