coughcough
Greenlighter
- Joined
- May 28, 2012
- Messages
- 4
Hey guys,
Regular BL'er just was easier to whip up a new account for this quick question. I know this topic has been discussed previously but I do not feel as if there is a well written, good outline of practices and universal supplies. Feel free to edit/move/delete, just figured you guys were the ones to come to!
My mate popped over on the weekend with what I considered to be a bunch of highly potent powder. Myself, I'm not game until there is a practice in which a dose can be measure accurately.
My post is in direct regards to Alprazolam but I believe same principles would apply to Diazepam although I've done very little investigation myself.
I understand that the likely best option would be use a suitable solvent to dissolve the substance so that it has a ML/MG ratio/dosage however you wish to put it.
After some heavy googling I've decided upon 30ml glass eye droppers. Apparently all droppers are the same in the sense of inaccuracy but on average, 20 drops from a standard drop squeezed at a normal speed will be equivalent to 1ML. You know the amber vial types with glass baby pipette and rubber squeezy thing aha. Well labeled, protected from sunlight and any hands who should not have access all seems safe. It's obviously a "medicine".
Correct me, please, if my math is wrong here... Bit slow today. 30ml * 20 drops = 600 drops of the solution. The solution should be diluted to as to disperse a single drop as close to 0.25MG as possible. 4 drops = standard xanax brick which would equate to 150mg of Alprazolam for every 30ml. Yeah?
My biggest concern and what makes me think this is within the scope of HM is the dangers of OD/unintentional over consumption PARTICULARLY with the nature of the drug. If I don't well, basically sort out something for him to dose accurately I'm concerned of the consequences. Hes currently eyeballing and I think the only thing keeping him "safe" is a tolerance but on a bender I just knowwww what will happen. Either way they're likely to be bad, just one may be fatally worse than the other.
Would it be possible/fine to use Glycerine Liquid as a solvent? I think I saw something mentioned in a Phenaz thread regarding this.
Alternatively what about 99% pure Isopropyl Alcohol? Now as far as I'm aware that shit is NOT to be drank but due to the tiny volume required damage may be negligible. The IPA is 99% as mentioned and comes from a proper industrial supplier.
All too often I see shit about everclear being the best thing for almost everything except drinking but seems borderline impossible to obtain. In Melbourne at least.
Whilst googling around on how to accurately dose this power shit I came across some Xanax perforated tabs apparently loaded at 2mg. This may or may not be within the scope of BL but I think that so long as it is a feasible option for safety it should/could be okay. As always theres pro's and con's and different priorities. First priority as you may have noticed is safety/accurate dosing. Secondly is storage and generally keeping a low key household, I suspect I'm going to have to take some of his stash away from him for his own personal safety. It was a blessing for him stumbling upon this magic but I feel a wave of danger and hurt about to hit.
Would I be able to get some suggestions on the solution or the laying of tabs. I understand that the correct paper must be used it is more so technique and equations to work out about absorption etc that hopefully someone can chime in about...
I figure with 4 drops to a bar it works in similar way too normal bricks in the sense you can have a light, medium or strong dose (obv. tolerance factors play a role in this but I'm sure you get what I mean).
Am I overlooking things? etc etc .... Mr. B... P_D... I'm looking riiiiiight at you
Let your thoughts flow !! Much appreciated
Regular BL'er just was easier to whip up a new account for this quick question. I know this topic has been discussed previously but I do not feel as if there is a well written, good outline of practices and universal supplies. Feel free to edit/move/delete, just figured you guys were the ones to come to!
My mate popped over on the weekend with what I considered to be a bunch of highly potent powder. Myself, I'm not game until there is a practice in which a dose can be measure accurately.
My post is in direct regards to Alprazolam but I believe same principles would apply to Diazepam although I've done very little investigation myself.
I understand that the likely best option would be use a suitable solvent to dissolve the substance so that it has a ML/MG ratio/dosage however you wish to put it.
After some heavy googling I've decided upon 30ml glass eye droppers. Apparently all droppers are the same in the sense of inaccuracy but on average, 20 drops from a standard drop squeezed at a normal speed will be equivalent to 1ML. You know the amber vial types with glass baby pipette and rubber squeezy thing aha. Well labeled, protected from sunlight and any hands who should not have access all seems safe. It's obviously a "medicine".
Correct me, please, if my math is wrong here... Bit slow today. 30ml * 20 drops = 600 drops of the solution. The solution should be diluted to as to disperse a single drop as close to 0.25MG as possible. 4 drops = standard xanax brick which would equate to 150mg of Alprazolam for every 30ml. Yeah?
My biggest concern and what makes me think this is within the scope of HM is the dangers of OD/unintentional over consumption PARTICULARLY with the nature of the drug. If I don't well, basically sort out something for him to dose accurately I'm concerned of the consequences. Hes currently eyeballing and I think the only thing keeping him "safe" is a tolerance but on a bender I just knowwww what will happen. Either way they're likely to be bad, just one may be fatally worse than the other.
Would it be possible/fine to use Glycerine Liquid as a solvent? I think I saw something mentioned in a Phenaz thread regarding this.
Alternatively what about 99% pure Isopropyl Alcohol? Now as far as I'm aware that shit is NOT to be drank but due to the tiny volume required damage may be negligible. The IPA is 99% as mentioned and comes from a proper industrial supplier.
All too often I see shit about everclear being the best thing for almost everything except drinking but seems borderline impossible to obtain. In Melbourne at least.
Whilst googling around on how to accurately dose this power shit I came across some Xanax perforated tabs apparently loaded at 2mg. This may or may not be within the scope of BL but I think that so long as it is a feasible option for safety it should/could be okay. As always theres pro's and con's and different priorities. First priority as you may have noticed is safety/accurate dosing. Secondly is storage and generally keeping a low key household, I suspect I'm going to have to take some of his stash away from him for his own personal safety. It was a blessing for him stumbling upon this magic but I feel a wave of danger and hurt about to hit.
Would I be able to get some suggestions on the solution or the laying of tabs. I understand that the correct paper must be used it is more so technique and equations to work out about absorption etc that hopefully someone can chime in about...
I figure with 4 drops to a bar it works in similar way too normal bricks in the sense you can have a light, medium or strong dose (obv. tolerance factors play a role in this but I'm sure you get what I mean).
Am I overlooking things? etc etc .... Mr. B... P_D... I'm looking riiiiiight at you
Let your thoughts flow !! Much appreciated