Egzoset
Bluelighter
- Joined
- Feb 23, 2013
- Messages
- 1,371
Salutations,
In retrospective we got the never-ending Loto Labs Evoke/Lux years-long mirage concluding with a piss-poor Dry Herb conductive/radiative delivery mode, then a much more decent IH-driver known as Dr. Dabber's Switch though still failing to offer the potential value to be expected from a susceptor, while being basically redistributed as oven walls instead... Each time done on a portable battery budget despite some obvious waste of energy which i believe can be trimmed down in future eventual yet-to-come DynaVap scenarios.
So here's how Egzoset envisions the quest for relatively satisfying portable KISS-style IH/Bi-Energy solutions:
[ https:// i.postimg.cc/bwXqk20c/Egzoset-s-idea-of-some-IH-Driven-Heat-Convertor-2019-Mar-28-7.png ]
[ http:// oi63.tinypic.com/14y4uma.jpg ]
Silicon Carbide Foam contained inside a simple Curie-effect alloy Ring promises to support a consumption mode previously explored in my 6-years old "Harm Reduction type of modded vaporizer pipe", now fully solved:
[ https:// i.postimg.cc/HnrptpJK/Egzoset-s-Fully-Customized-VG-Hybrid-Core-2019-Mar-25-600x300.png ]
[ http:// oi66.tinypic.com/2645kwi.jpg ]
[ https:// i.postimg.cc/P5CNjNbn/Egzoset-s-Full-Metal-Alu-Cust-VG-top-2019-Mar-26-400x300.png ]
[ http:// oi66.tinypic.com/f0rv4h.jpg ]
[ https:// i.postimg.cc/dV9FgYpc/Egzoset-s-Full-Metal-Brass-Cust-VG-top-2019-Mar-26-400x300.png ]
[ http:// oi65.tinypic.com/2u6goyx.jpg ]
Take note of the PinHole path(s) finally verified and most definitively adopted...
M'well, i'm still currently performing a last few adjustments but that's plenty proof-of-concept to comment on today's DiY challenge anyway.
Not to mention my theory behind both layouts remains the same:
[ https:// s33.postimg.cc/zbh3ps76n/Specific_Heat_formula_300x200.png ]
[ http:// oi65.tinypic.com/2psg31j.jpg ]
My LAVATube concept belongs to a KISS mentality indeed but there's a major trade-off coming with it: half of it irradiates energy outside - and that's the point where one might want to argue DynaVap's spiral path under a VapCap is just what it takes to "recycle" such heat lost for no good purpose otherwise. Even better, the simpler 2-parts coaxial structure (plus opt. screen) doesn't only displace hot metal surfaces away: it invites Full-Glass scenarios though at the cost of additional delays making it even more desirable to exploit "transitional" properties which emerge in "Micro-Bursting" mode. This allows a relatively slow/steady Pre-Heat (Charge Injection) cycle while providing a brief/dense energy "bubble" intended to target tiny features of a bowl's contact-surfaces (mainly trichomes)...
As a bonus pure analog Output Control (gained in previous Near-Symetrical LAVACapsule strategies) would remain compatible with such coaxial setup i believe. YMMV. Though i continue to view my VG-inspired Hybrid Core as one offering the most optimized energy budget, because it's structed to behave like a thermal bottle. Too bad it falls into the "Hot Dry Air" category in absence of clean-burning butane to generate Inlet Water, hence making it a lesser priority at least until i solved the PH problem recently.
Final goal(s) ain't changed significantly.
Good day, have fun!! ☮
In retrospective we got the never-ending Loto Labs Evoke/Lux years-long mirage concluding with a piss-poor Dry Herb conductive/radiative delivery mode, then a much more decent IH-driver known as Dr. Dabber's Switch though still failing to offer the potential value to be expected from a susceptor, while being basically redistributed as oven walls instead... Each time done on a portable battery budget despite some obvious waste of energy which i believe can be trimmed down in future eventual yet-to-come DynaVap scenarios.
So here's how Egzoset envisions the quest for relatively satisfying portable KISS-style IH/Bi-Energy solutions:
[ https:// i.postimg.cc/bwXqk20c/Egzoset-s-idea-of-some-IH-Driven-Heat-Convertor-2019-Mar-28-7.png ]
[ http:// oi63.tinypic.com/14y4uma.jpg ]
Silicon Carbide Foam contained inside a simple Curie-effect alloy Ring promises to support a consumption mode previously explored in my 6-years old "Harm Reduction type of modded vaporizer pipe", now fully solved:
[ https:// i.postimg.cc/HnrptpJK/Egzoset-s-Fully-Customized-VG-Hybrid-Core-2019-Mar-25-600x300.png ]
[ http:// oi66.tinypic.com/2645kwi.jpg ]
[ https:// i.postimg.cc/P5CNjNbn/Egzoset-s-Full-Metal-Alu-Cust-VG-top-2019-Mar-26-400x300.png ]
[ http:// oi66.tinypic.com/f0rv4h.jpg ]
[ https:// i.postimg.cc/dV9FgYpc/Egzoset-s-Full-Metal-Brass-Cust-VG-top-2019-Mar-26-400x300.png ]
[ http:// oi65.tinypic.com/2u6goyx.jpg ]
Take note of the PinHole path(s) finally verified and most definitively adopted...
M'well, i'm still currently performing a last few adjustments but that's plenty proof-of-concept to comment on today's DiY challenge anyway.
Not to mention my theory behind both layouts remains the same:
[ https:// s33.postimg.cc/zbh3ps76n/Specific_Heat_formula_300x200.png ]
[ http:// oi65.tinypic.com/2psg31j.jpg ]
My LAVATube concept belongs to a KISS mentality indeed but there's a major trade-off coming with it: half of it irradiates energy outside - and that's the point where one might want to argue DynaVap's spiral path under a VapCap is just what it takes to "recycle" such heat lost for no good purpose otherwise. Even better, the simpler 2-parts coaxial structure (plus opt. screen) doesn't only displace hot metal surfaces away: it invites Full-Glass scenarios though at the cost of additional delays making it even more desirable to exploit "transitional" properties which emerge in "Micro-Bursting" mode. This allows a relatively slow/steady Pre-Heat (Charge Injection) cycle while providing a brief/dense energy "bubble" intended to target tiny features of a bowl's contact-surfaces (mainly trichomes)...
As a bonus pure analog Output Control (gained in previous Near-Symetrical LAVACapsule strategies) would remain compatible with such coaxial setup i believe. YMMV. Though i continue to view my VG-inspired Hybrid Core as one offering the most optimized energy budget, because it's structed to behave like a thermal bottle. Too bad it falls into the "Hot Dry Air" category in absence of clean-burning butane to generate Inlet Water, hence making it a lesser priority at least until i solved the PH problem recently.
Final goal(s) ain't changed significantly.
Good day, have fun!! ☮