simstim
Bluelighter
- Joined
- Apr 20, 2021
- Messages
- 6,664
First you need the right kind of bulbs. They have to be old incandescent bulbs rated for 100 watts or better. 60 watt bulbs shatter quickly. Never try this with led light bulbs.
Be careful! This involves glass which will cut you if you break it, a hot torch, and a sharp knife.
If you can get the ones that are clear get them. If the bulbs are frosted I will tell you how to remove it shortly. You are going to need table salt.
You will need a torch at some point. You will also need a straw and the cap off of a plastic soda bottle.
First take a bulb and get something heavy and metal. Cup the bulb in your hand and use something like a tire iron, hammer, or wrench to break the ceramic seal around the bottom of where the bulb screws in. Usually this ceramic is black.
Now get some pliers and pull the element out through the hole that you just made in the base of the bulb.
If you got frosted bulbs what you do next is pour table salt into the bulb and then swirl the salt around. All of the frost inside the bulb should be removed in this manor. Don't use water. Throw out the salt.
Next take your torch and heat the bulb until it melts and form a small hole for air to flow through and for loading . This takes some practice.
Now for the finishing touches.
Use a knife and Jimmy the plastic liner in the bottle top out and dispose.
Drill a hole in the soda bottle cap the size of the straw (you can sort of do this with the end of a sharp knife) . Then insert the straw into the plastic bottle cap.
Now tape the straw into place so that it is air tight.
Now screw the plastic bottle cap onto the base of the bulb. You can tape it if you wish.
That's it! You did it!
Now load your bone through the hole you torched into it and use a Bic ligter to melt your product and then inhale through the straw when it melts and turns to vapor.
Useful for meth, crack, dmt, and even vaping herb. Yes I have tried vaping herb in a light bulb. Even synthetic cannibinoids, cathinones, whatever.
Be careful! This involves glass which will cut you if you break it, a hot torch, and a sharp knife.
If you can get the ones that are clear get them. If the bulbs are frosted I will tell you how to remove it shortly. You are going to need table salt.
You will need a torch at some point. You will also need a straw and the cap off of a plastic soda bottle.
First take a bulb and get something heavy and metal. Cup the bulb in your hand and use something like a tire iron, hammer, or wrench to break the ceramic seal around the bottom of where the bulb screws in. Usually this ceramic is black.
Now get some pliers and pull the element out through the hole that you just made in the base of the bulb.
If you got frosted bulbs what you do next is pour table salt into the bulb and then swirl the salt around. All of the frost inside the bulb should be removed in this manor. Don't use water. Throw out the salt.
Next take your torch and heat the bulb until it melts and form a small hole for air to flow through and for loading . This takes some practice.
Now for the finishing touches.
Use a knife and Jimmy the plastic liner in the bottle top out and dispose.
Drill a hole in the soda bottle cap the size of the straw (you can sort of do this with the end of a sharp knife) . Then insert the straw into the plastic bottle cap.
Now tape the straw into place so that it is air tight.
Now screw the plastic bottle cap onto the base of the bulb. You can tape it if you wish.
That's it! You did it!
Now load your bone through the hole you torched into it and use a Bic ligter to melt your product and then inhale through the straw when it melts and turns to vapor.
Useful for meth, crack, dmt, and even vaping herb. Yes I have tried vaping herb in a light bulb. Even synthetic cannibinoids, cathinones, whatever.
Last edited:
