Egeo_consilii
Greenlighter
- Joined
- Feb 12, 2011
- Messages
- 25
Hi all, I just wanted to contribute some information regarding the "Kadian" brand of extended release morphine sulphate. I've had trouble finding reliable information concerning these pills, so I wanted to describe my method that seems far easier than other methods I've been seeing posted around the internet. So here it goes:
Step: 1.) Open Capsule (I've recently acquired the brown 200mg ones).
2.) Pour contents(little white beads) in anything sterile used to crush (I've used dollar bills before in a pinch, but
in the interest of harm reduction, I'd use a good quality pill crusher swabbed with alcohol, or, OPTIMALY: A
small shotglass swabbed with alcohol, left to dry briefly, and the orange tip of a syringe (also alcohol
swabbed), as a "pestle" and crush finely using the tip of the syringe. Since morphine sulphate has a
solubility of 60mg/ml of water at 20C, ice cold bacteriostatic water at 5C should approach 100mg/ml (not
exactly), I only used half of the contents of my 200mg pill).
3.) Pour crushed contents of said pill in a (pre alcohol swabbed spoon), and continue to crush even more finely
with the aforementioned tip of sterile sryinge.
4.) Add (like I mentioned before cold bacteriostatic water if using more than 60mg), and continue to crush,
stirring often).
5.) The bead casings will not dissolve in cold water (which is very good considering what they're made out of
should, under no circumstances, enter in to the final solution).
6.) Using a micron filter or a wheel filter, finger the milky white cold solution from the bits and particles
(prior to having access to micron or wheel filters I've used antimicrobial steril cotton, but it is NOT
recommended, because you have no way of filtering out the microscopic small bits of God-knows-what-
fillers).
After filtering you should now have a clear solution of morphine sulphate that is ready for injection. Mods and/or experts, please move this to a more appropriate place if necessary and add/correct any information that might be considered unsafe or is incorrect.
Also, I'd be very interested if anyone else uses this method? If so are there any changes you make from this? I'm also curious to know if this is indeed as safe as I think, or am I terribly wrong? Thanks for letting me add my 2 cents,
-EGC.
Step: 1.) Open Capsule (I've recently acquired the brown 200mg ones).
2.) Pour contents(little white beads) in anything sterile used to crush (I've used dollar bills before in a pinch, but
in the interest of harm reduction, I'd use a good quality pill crusher swabbed with alcohol, or, OPTIMALY: A
small shotglass swabbed with alcohol, left to dry briefly, and the orange tip of a syringe (also alcohol
swabbed), as a "pestle" and crush finely using the tip of the syringe. Since morphine sulphate has a
solubility of 60mg/ml of water at 20C, ice cold bacteriostatic water at 5C should approach 100mg/ml (not
exactly), I only used half of the contents of my 200mg pill).
3.) Pour crushed contents of said pill in a (pre alcohol swabbed spoon), and continue to crush even more finely
with the aforementioned tip of sterile sryinge.
4.) Add (like I mentioned before cold bacteriostatic water if using more than 60mg), and continue to crush,
stirring often).
5.) The bead casings will not dissolve in cold water (which is very good considering what they're made out of
should, under no circumstances, enter in to the final solution).
6.) Using a micron filter or a wheel filter, finger the milky white cold solution from the bits and particles
(prior to having access to micron or wheel filters I've used antimicrobial steril cotton, but it is NOT
recommended, because you have no way of filtering out the microscopic small bits of God-knows-what-
fillers).
After filtering you should now have a clear solution of morphine sulphate that is ready for injection. Mods and/or experts, please move this to a more appropriate place if necessary and add/correct any information that might be considered unsafe or is incorrect.
Also, I'd be very interested if anyone else uses this method? If so are there any changes you make from this? I'm also curious to know if this is indeed as safe as I think, or am I terribly wrong? Thanks for letting me add my 2 cents,
-EGC.