need some solvent help

[scriptlord]

I need some help on choosing the right solvent for the liquid measurement technique. I need help on the following compounds...
2CT7
5MEODMT
5MEODIPT
DIPT
AMT
ALL HELP WOULD BE APPRECIATED
------------------
"When I die, I'd like to be reborn as myself"
-HUGH HEFNER

 

[Griff]

distilled water should work fine.
Or, everclear if you want to evaporate to get the powder back.

 

[Quirks]

If there is any water in the solvent then you will get wet goo if you evaporate.

 

[Griff]

Quirks: If there is any water in the solvent then you will get wet goo if you evaporate

Where do you draw this information from? If you get a wet goo, then yeah, there may be water in it.
However, last I checked, water was capable of being evaporated. Infact, last I checked, the solotion that Ketamine comes in is mostly.... water. You evaporate all the water out, and boom... nice fluffly, dry K.

 

[Dr. Quack]

Always evaporate a sample of your solvent first to see if it leaves residue....if it does junk it.

 

[Roches]

it doesn't always work like that...lots of things don't dry easily. crystal is a fairly good example. they retain the last bit of water even if it's just from wet solvent, and it's very hard to remove.
test your solvent to see if it leaves residue first, definitely. you can make it dry by adding anhydrous magnesium sulfate (until it stops forming clumps), then filtering.
make sure you know the exact temperature and make sure you perform the solubility test as close to the reference's temperature as possible. the relationship of solubility and temperature is not linear and is difficult to predict.

 

[someguy]

does anybody know if amt/everclear solution evaporates and crystalizes effectivly??

 

[PhreeX]

I have never tried with AMT, but some 151 proof shit worked wonders with 2C-T-7 - evaporated quickly, however, there was a higher amount of powder lost than when water was used..
------------------
PAK CHOOIE UNF! Do not trust the pusher robot, he is malfunctioning, we are here to protect you..

 

[someguy]

PhreeX- What would you recommend? ie brand name an such

 

[Roches]

151? well.. there's everclear... everclear is 95% ethanol, 5% water. at that composition the boiling point is the same (an azeotrope) so you can't purify the ethanol any further. it's dried chemically, probably with magnesium sulfate, cobalt chloride or something else that complexes with a lot of water.
for my own (fully legitimate) chemical purposes, both 95% and absolute ethanol are used... but if i were recrystallizing something, and washing with ethanol, i'd probably wash a couple times with 95% then with absolute (absolute ethanol costs a lot more).
btw, if your product is still wet, you could try washing it with a solvent in which it is insoluble, but which mixes with water. make sure it's cold, and don't use much.

 

[someguy]

sorry I'm kind of ignorant to all of this;
SWIM has 1000mgs of ATM he mixes it with 1000mls of everclear then devides it out in 50ml containers then just lets the liquid sit and evaporate into open air.
Is this all you need to do???

 

[PhreeX]

Thats really all there is to it... disolve then evaporate..
------------------
PAK CHOOIE UNF! Do not trust the pusher robot, he is malfunctioning, we are here to protect you..