Bluelight

Thread: Heroin addict having weird withdrawal symptoms after using Shake and Bake Meth?

Results 1 to 4 of 4
  1. Collapse Details
    Heroin addict having weird withdrawal symptoms after using Shake and Bake Meth? 
    #1
    So I am a heroin addict and have been for about 8 years now. And recently I been dabbling with meth. But it's not ice, it's Shake and Bake powder. (Idk if that makes a difference in why this is happening?) But for example, say I do my shot in the morning to get my sick off. And a couple hours later i do some of the meth. But as soon as I bang it, it feels like banging a piece of Suboxone, but to early. I get this wicked flood of sweats accompanied by feeling flushed cold and goose bumps, my pupils dilate HUGE! And ask if the sudden I feel like I hadn't done any heroin that day yet.. Now this didn't happen the first couple times I tried the meth, and actually it made me hold even longer than normal before having to do another shot of heroin. But recently I've been getting an opposite effect and it has been making me feel like complete shit. Almost like the meth strip's the opiates off of my receptors and replaced it with the meth. And I'm all of the sudden cold, sweaty, huge pupils, runny nose, head dizzy, distorted vision, tremors, and absolutely NO BENEFITS FROM THE METH HIGH! It's like I just jumped into not having opiates for about 24hrs. That's the similar feeling I get. And I physically look like I've been withdrawing for hours already even tho I just did my shot 2 hours ago, you'd think I hadn't done any in like 24hrs. Anyone else have a similar experience?

    *Note: Remember, this is not ice, it's Shake and Bake white powder meth.*
    Reply With Quote
     

  2. Collapse Details
     
    #2
    Temporary Ban
    Join Date
    Oct 2005
    Location
    UK
    Posts
    6,241
    Hmm.

    Shake'n'bake is a revolting, really crude as fuck way of doing it, and for the cook, dangerous as hell. Its ghetto stuff, as likely as not to go up in a cook's face.

    Its a variation on the Birch type reductions, using lithium and ammonia, and I did read a thread here recently where somebody was saying that their opioid (oxy, IIRC) was having no effect whilst they were on lithium carbonate for bipolar. I wonder, if there were traces (or more, given the crude, ghetto nature of shake and bake, and the really low quality, low skill product/manufacture of the stuff)

    So perhaps they didn't wash out the Li salts, or not all of them (hell, wouldn't put it past shake and bake 'cooks' to leave it in to add weight, even. Sketchy shit, that, and/or unreduced pseudoephedrine/ephedrine present could cause such nasty effects. In opioid WD, there is a LOT of hyperactivation of the sympathetic nervous system, and catecholamine (noradrenaline, adrenaline etc.) release, and pseudo/ephedrine are, if not reduced, noradrenergic releasers, that IMO could cause just that sort of unpleasantness.

    Stick to real meth mate, don't use shake and bake, its bad stuff, badly made, and dirty. If you are going to use meth, make it ice, or at least clean powder. If making it yourself, abandon the shake and bake, its a damn dangerous procedure. It is possible to use a stream of anhydrous GASEOUS ammonia, rather than cryogenic liquefied NH3, if this is run through a drying tube, before bubbling into anhydrous diethyl ether, under a flow of argon to keep unwanted reactions from occurring. The formation of the solvated electron blue does take place when this is done at room temperature, just needs the quantity of lithium or sodium pre-calculating for the relevant quantity of PSE/ephedrine, and before adding the feedstock and proton donor, gassing an ethereal suspension of Li or Na cut up really finely, with a constant stream of NH3. It takes several hours for the solvated electron 'soup' to form, and get dark and concentrated, and of course the exhaust ammonia needs venting through first a suck-back trap, then a tank full of bog or kitchen roll, moistened with something like concentrated phosphoric acid, or with HCl to trap any escaping NH3 as a nonvolatile, insoluble salt before it can exit to the environment and set up a stink. Works though, and despite the need for a lot of NH3 gas, this is easily prepared from ammonium sulfate or phosphate fertilizer and NaOH, dripping H2O onto it slowly via a sep. funnel or pressure-equalizing addition funnel more ideally, then the gas passed through a drying tube containing calcium oxide (quicklime), to dry the NH3 gas, before it is bubbled as a constant stream into the suspension of alkali metal in dry diethyl ether.

    Just be sure to use argon for the inert gas coverage, rather than nitrogen, if using Li metal rather than sodium to prepare the solvated electrons, because while nitrogen is usually unreactive towards most things, it isn't inert to lithium, which forms an extremely strongly basic nitride, which may have explosive properties. Sodium, potassium though, do not form such a nitride with atmospheric pressure and room-temperature Na or K, just lithium. So argon, whilst a little more expensive, is by far the better to use.


    A helium atmosphere could also be used instead, but helium is inferior too for this purpose IMO, because of its very low density, helium floats in air, and would float up out of the reaction flask, whereas argon is pretty heavy, dense stuff and helps form a protective pad over the surface of a reaction conducted under inert gas atmospheres, and it is a lot more willing to stay there , blanketing the reaction rather than trying to float out and bugger off.

    And btw, the ethereal reaction described here for harm reduction purposes is NOT conducted under pressure. The dry ether is loaded into the flask, the flask headspace purged with argon by bubbling dry argon through the ether, before adding th pe Li, cut up into fine little tiny pieces to maximize the surface area of the alkali metal in contact with the incoming ammonia stream. The NH3 is generated in a second flask, with an ammonium salt, and NaOH, using the pressure-equalizing addition funnel to drip water into the NaOH/ammonium salt mixture to provide the stream of gas to be passed through a drying tube of quicklime and into the reaction to create the solvated electrons needed for the reduction.
    Reply With Quote
     

  3. Collapse Details
     
    #3
    Are you sure your not just overdosing on meth tremor pupil dialation sweating ur basically just describing alot of sympathetic (fight or flight) activity vs parasympathetic (pupil constriction rest and digest)
    Reply With Quote
     

  4. Collapse Details
     
    #4
    Moderator
    Basic Drug Discussion
    falsifiedhypothesi's Avatar
    Join Date
    Feb 2014
    Location
    Detroit MI
    Posts
    2,658
    It sounds like generally poor quality meth. I shudder to think of the kind of junk that hasn't been filtered out of the meth going into your veins. Try an acetone wash on your meth to improve the quality, or you can use another ROA to ingest that dirty ass shake and bake.

    Also a micron filter will probably help keep some of the junk out of your shot. Prefilter the solution through a cotton first then run it through the micron filter so it doesn't get clogged and gets the maximum effectiveness.

    I only have experience with amphetamine, pharmaceutical opiates, and kratom, in my experience amphetamine worsens most of the withdrawal symptoms so that could be what's going on here.

    I think cleaning up your meth will make a huge difference, your body is probably reacting to all that junk in the shake and bake. Plus if you clean the stuff up you can save your veins.
    Reply With Quote
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •