80mg
Bluelighter
- Joined
- Mar 1, 2010
- Messages
- 722
So. It's been a long time. The reason Im here is too help people with my own experience that are dead set on shooting. Alot of people look down on it while they sniff, smoke, eat, plug, and everything else with drugs; Infact, shooting, slamming, whatever you call it can be alot healthier than the average perso thinks, if done correctly.
The big problem with injecting pills is the filler. I'll start with MS Contin.
MS Contin is one of the most perscribed opiates in the western world. Reason being is that it contains Morphine Sulfate carying in mg dossage from 5-100mg. Morphine is not as strong as heroin, but I find on average 30mg comes pretty close too the rush of a street bag (by the time you get it...if you get 6-10% pure heroin consider yourself blessed).
One of the major down sides too injecting MS though is the way the pilled is designed. The pill is designed very simmilar too the new OP Perdue Oxycodone. Meaning that when combined with water, the waxy filler asorbs and expands, leaving you what looks like a pile of cum on your spoon. Pretty gross. Now I havent got my hands on the OP OC's yet, so I can't say if this method would work too defeat the anti abuse wax the same, but I can say how to do it with the MS.
Steps go as follow:
1) You wake up, you call your dealer. Your shady dealer sells you a pill.
2) Get your supplys ready which should include:
- A clean cooking spoon or cup.
- A candle
- Matches
- A clean syringe
- Alchol Swabs
- Bottled water or styrile water from a pharmacy. (tap is fine if there is no other option)
- And cotton
3) Start off by getting the time realese coating colored layer off. This can be one easily with a wet paper towel. Usually takes 2-3 minutes. When all the color is off and the scores on the pill are faded, youve done a pretty good job. The more you get off now, the easier it will be. But also dont go too town too much...youll lose some morphine.
4) Once your coat is removed, take the pill, put it in your cooking spoon, and crush it as finley as possible. I find a top of a chap stick is flat and big enough too ensure your pill wont go flying across the room and you will crush it pretty finley. A better way too do it is too use a hose clamp too shave it dowm,but most opiate addicts arent that paitent.
5) Now you get your water. Take your syringe and fill it with a whole CC of water. Spread the water evenly over the pill so that the powder is no longer visible above the surface.
6) Now is the fun part (IMO), you light your candle, and put your spoon over it. This is the trick too getting that goo into a watery, morphine substance. You cook it over the flame. Don't get nervous when you start seeing smoke, because infact it isnt smoke. It is just some of the water evaporating. By now the water should start going back too normal, and there should be some clumps in it. These clumps should start turning white. At a point, a boiling area will appera. This is where bubbles will start comnig from. Try toochange the boiling area too where the white clumps are as much as possible too get as much morphine broken down as possible. It is impossible too get it all too break down, simply because it's not all morphine. But a great percentage should be melted down. If you want, add a little more water (30 units) and cook one more time. I find that too be the best way.
7) Take a quater cotton ball, roll it in a ball, and place in the center. Wait a minute too let the cotton asorb the morphine. Now take your syringe, and place the needle laying on top of the cotton, not stabbing through it. Slowly draw up the morphine.
8) Clean your spoon you cooked with (I will take whatever gump is left and swallow it for good measure). Now empty the morphine back into it, and re filter again. Reason being is too get out as much wax as possible. You should get back as much as you put in before the second filtering (about 90 units)
9) Take a alcohol swab and prep the area you wish too inject into.
10) insert syringe, draw back blood too ensure you hit a vein, slowly inject too avoid the prickly sensation that morphine gives. If you enjoy it...inject a little on the fast side.
11) Remove syringe, wipe away any blood, and chill.
Micron filters are a great thing, but not avaliable in all areas. That is why I use cotton and filter twice with MS's. Personally, I think the wax coating time release thing is bullshit. They know Morphine is abused, and they know if theres a will, theres a way. But they rather see people hurt there bodies rather than let consenting adults get high while being as safe as possible. I hope this guide helps someone. - 80
The big problem with injecting pills is the filler. I'll start with MS Contin.
MS Contin is one of the most perscribed opiates in the western world. Reason being is that it contains Morphine Sulfate carying in mg dossage from 5-100mg. Morphine is not as strong as heroin, but I find on average 30mg comes pretty close too the rush of a street bag (by the time you get it...if you get 6-10% pure heroin consider yourself blessed).
One of the major down sides too injecting MS though is the way the pilled is designed. The pill is designed very simmilar too the new OP Perdue Oxycodone. Meaning that when combined with water, the waxy filler asorbs and expands, leaving you what looks like a pile of cum on your spoon. Pretty gross. Now I havent got my hands on the OP OC's yet, so I can't say if this method would work too defeat the anti abuse wax the same, but I can say how to do it with the MS.
Steps go as follow:
1) You wake up, you call your dealer. Your shady dealer sells you a pill.
2) Get your supplys ready which should include:
- A clean cooking spoon or cup.
- A candle
- Matches
- A clean syringe
- Alchol Swabs
- Bottled water or styrile water from a pharmacy. (tap is fine if there is no other option)
- And cotton
3) Start off by getting the time realese coating colored layer off. This can be one easily with a wet paper towel. Usually takes 2-3 minutes. When all the color is off and the scores on the pill are faded, youve done a pretty good job. The more you get off now, the easier it will be. But also dont go too town too much...youll lose some morphine.
4) Once your coat is removed, take the pill, put it in your cooking spoon, and crush it as finley as possible. I find a top of a chap stick is flat and big enough too ensure your pill wont go flying across the room and you will crush it pretty finley. A better way too do it is too use a hose clamp too shave it dowm,but most opiate addicts arent that paitent.
5) Now you get your water. Take your syringe and fill it with a whole CC of water. Spread the water evenly over the pill so that the powder is no longer visible above the surface.
6) Now is the fun part (IMO), you light your candle, and put your spoon over it. This is the trick too getting that goo into a watery, morphine substance. You cook it over the flame. Don't get nervous when you start seeing smoke, because infact it isnt smoke. It is just some of the water evaporating. By now the water should start going back too normal, and there should be some clumps in it. These clumps should start turning white. At a point, a boiling area will appera. This is where bubbles will start comnig from. Try toochange the boiling area too where the white clumps are as much as possible too get as much morphine broken down as possible. It is impossible too get it all too break down, simply because it's not all morphine. But a great percentage should be melted down. If you want, add a little more water (30 units) and cook one more time. I find that too be the best way.
7) Take a quater cotton ball, roll it in a ball, and place in the center. Wait a minute too let the cotton asorb the morphine. Now take your syringe, and place the needle laying on top of the cotton, not stabbing through it. Slowly draw up the morphine.
8) Clean your spoon you cooked with (I will take whatever gump is left and swallow it for good measure). Now empty the morphine back into it, and re filter again. Reason being is too get out as much wax as possible. You should get back as much as you put in before the second filtering (about 90 units)
9) Take a alcohol swab and prep the area you wish too inject into.
10) insert syringe, draw back blood too ensure you hit a vein, slowly inject too avoid the prickly sensation that morphine gives. If you enjoy it...inject a little on the fast side.
11) Remove syringe, wipe away any blood, and chill.
Micron filters are a great thing, but not avaliable in all areas. That is why I use cotton and filter twice with MS's. Personally, I think the wax coating time release thing is bullshit. They know Morphine is abused, and they know if theres a will, theres a way. But they rather see people hurt there bodies rather than let consenting adults get high while being as safe as possible. I hope this guide helps someone. - 80