Bluelight

Thread: Clearing the Crack Pipe

Page 1 of 2 12 LastLast
Results 1 to 25 of 26
  1. Collapse Details
    Clearing the Crack Pipe 
    #1
    Lightbulb
    What are some methods for clearing a pipe? 'My friend' use a glass stem an some chore boy. Should he swap out the chore boy a few times?

    I've read something somewhere about how smoking the crack residue is the best part or sum shit like that. Anyone know how to smoke the 'caked up crack' along the inside of the pipe?

    Thanks fellas
    Last edited by cok3he4d; 16-05-2009 at 00:37.
     

  2. Collapse Details
     
    #2
    scrape it just like weed
     

  3. Collapse Details
     
    #3
    You slide the chore boy back and forth through the stem with two pokers. ANd then you hit that and get a huge blast. Are you telling me you've never slid the chore from side to side and taken blasts

    Sometimes when you heat it up a bit , it slides better
     

  4. Collapse Details
     
    #4
    Quote Originally Posted by Cosmic Charlie View Post
    Are you telling me you've never slid the chore from side to side and taken blasts
    lol, no i've never done it....i'm a fairly new crackhead ...started about 6 months or so.....i've been doing coke for a while....and when that got to expensive I used to smoke wet all time...thanks for the tip tho....any more tips for getting some god blasts?....i've 'cooked back' the crack or whatever its called....adding water and crack in a spoon, heating the bottom, and mixing with a penny, separating the crack from its cut....didn't really do that much for me, tho, i only smoked small rocks..
     

  5. Collapse Details
     
    #5
    Bluelighter thugpassion's Avatar
    Join Date
    Oct 2005
    Location
    SoCal
    Posts
    1,848
    It sounds like you have your stem/pipe right. Just make sure your brillo is nice and tight in the glass stem, and just push it back and forth until it has collected all the crack resin. This is sometimes called "cavier" and the better the crack the better sticker resin you should get, if you dont get any resin back than your stuff might suck. And yes, if your going through that much rock than you might want to change your brillo afew times.
     

  6. Collapse Details
     
    #6
    Bluelighter GolfR32's Avatar
    Join Date
    Oct 2006
    Location
    315, 714, 949, 805
    Posts
    113
    Ok I was reading this and couldn't remember what chore boy was. So I did a google image search where I learned that chore boy is owned by Reckitt Benckiser, producers of the almighty Suboxone.

    Does anyone else find that strange?
     

  7. Collapse Details
     
    #7
    Bluelighter DopaMan's Avatar
    Join Date
    Oct 2005
    Location
    America the land of the free
    Posts
    1,305
    The sliding the chore back and forth is often called "pushing" and is one of many famous crackhead maneuvers like going through the carpet. It's usually a sad attempt to get high but if you have been blasting hard for awhile then "pushing can yield a pretty potent blast (only ONE usually and maybe a weak second blast). Pushing for another hit after 1 or max 2 is serious crackhead territory, as you can visually see that it is not going to work.
     

  8. Collapse Details
     
    #8
    Usually when I push the chore I push it after a while and definatly after a good session. I got some of the best hits from it. Definatly saves you a good minute of fiending

    If you run the flame across the stem a few times to liquify the caked up crack in the stem than push the chore, it works like a charm

    The Chore always ends up squishing together to much and getting burnt down after a while. If your blowing 300$ in rocks youll probably want to change the chore after a bit

    Good luck man, dont get caught up in that shit

    Am I wrong in think that the "caked up crack" is the purest? Because most of the impurities were burned off and only the cocaine re-solidifies
     

  9. Collapse Details
     
    #9
    Bluelighter
    Join Date
    Feb 2009
    Location
    Bay Area
    Posts
    1,006
    why wouldn't the crap re solidify right along with the coke?
     

  10. Collapse Details
     
    #10
    Bluelighter xxl's Avatar
    Join Date
    Jul 2006
    Location
    Europe
    Posts
    1,434
    A point will be reached at which your pipe is caked solid. Time for a big cleanup. Crack is highly soluble in alcohol (ethanol). You run a cubic inch of ethanol through the pipe, reusing it each time so as not to end up with too much solution. It doesn't matter which grade of ethanol, the higher the better of course, but in a spot you can use vodka (although you will then end up with some sugar in your resin). Caution: wait till your pipe and chore are no longer hot before pouring down ethanol, otherwise your pipe will go off like a musket.

    Once the resin is cleaned from the pipie, squirt or pour the now honey-couloured ethanol onto a soup plate and leave to evaporate. The crack may condense in cute golden flakes on the plate rim. Before pouring the ethanol solution onto the plate you may want to filter it through a common coffe filter: this will remove any soot.

    Some people advocate setting fire to the ethanol. You should only do that if you're sure you're ethanol is not high grade, ie if you're certain it contains a good deal of water. The logic is that the ethanol burns and vaporises some of the water with it because of the temperature. Within 20 seconds you're left with just a tiny weeny bit of water to evaporate. This is a shortcut compared to waiting out the low-temperature evaporation. I tried it once and before I knew what hit me I had flames up to the ceiling. No harm done but I swore to myself never again to put a flame to ethanol. Better bide on'es time.
     

  11. Collapse Details
     
    #11
    Quote Originally Posted by GolfR32 View Post
    Ok I was reading this and couldn't remember what chore boy was. So I did a google image search where I learned that chore boy is owned by Reckitt Benckiser, producers of the almighty Suboxone.

    Does anyone else find that strange?
    it doubles their profit margin interesting fact.

    xxl - that's full on with the vodka incident. live and learn hehe
     

  12. Collapse Details
     
    #12
    Greenlighter
    Join Date
    Jun 2009
    Location
    Lakeland, FL
    Posts
    17
    I cut about a 10 inch piece of wire hanger and use that to scrape the inside. Resin hits are the effin sh*t!
     

  13. Collapse Details
     
    #13
    To get the resin in a glass tube. First push the chore boy or screens to the very end of the same side it already on and make sure to pack it down with something thick or else youll put a hole in the screens. You want it tight so when you push it all the way to the other side all the resin will stay on that side of the screens Next take a much thinner piece of metal and scrape the sides starting from closest to you working your way down. next push it with the thich pusher to the other side and blast off.
     

  14. Collapse Details
     
    #14
    Let it sit overnight in a bath of Hydrochloric Acid, if this is not available to you use lemon juice or vinegary. in the morning, rub whatever didn't come off (although most of it should have), rinse with water, and proceed to smoke the glorious rock.

    To save the resin, you can simply let the HCL dissolve. Done.
     

  15. Collapse Details
     
    #15
    BL Ambassador Captain.Heroin's Avatar
    Join Date
    Nov 2008
    Location
    I wished with all my heart that we could just...leave this world behind. Rise like two angels in the night and magically...disappear.
    Posts
    46,485
    This is not OD material.

    Clear your crack pipe in BDD.
     

  16. Collapse Details
     
    #16
    feels good man
     

  17. Collapse Details
     
    #17
    Bluelighter epiks's Avatar
    Join Date
    Jun 2009
    Location
    Seattle
    Posts
    456
    What about a butane torch?
     

  18. Collapse Details
     
    #18
    yeah - that working the chore boy up and down the stem and collecting the residue and then taking a hit can give you a great bell-ringer. To make it even better after scraping, in addition another little piece of crack at the end of your pipe and you can really going into a fucking wild orbit.

    Man - looking forward to some wild weekend fun myself!
     

  19. Collapse Details
     
    #19
    Greenlighter
    Join Date
    Apr 2011
    Location
    Pembroke Pines, Fl
    Posts
    4
    What about a butane torch?


    A butane torch isn't necessary for smoking crack only suggested. I find its best to use a regular bic but only the tip while rotating the pipe the whole time. This evenly heats the rock and prevents burning of the lips. This is just me though. Everyone has there different way to do their own thing
     

  20. Collapse Details
     
    #20
    Bluelighter StaySedated's Avatar
    Join Date
    Aug 2010
    Location
    In the future
    Posts
    2,646
    scrape it with a steak knife or something(i use a steak knife). but if you starting to fiend and are trying to compulsively get a hit of the resin then its time to come down.
     

  21. Collapse Details
     
    #21
    Quote Originally Posted by roxisett View Post
    Let it sit overnight in a bath of Hydrochloric Acid, if this is not available to you use lemon juice or vinegary. in the morning, rub whatever didn't come off (although most of it should have), rinse with water, and proceed to smoke the glorious rock.

    To save the resin, you can simply let the HCL dissolve. Done.
    that would result in cocaine HCL, not freebase.
     

  22. Collapse Details
    Dont liquify 
    #22
    Greenlighter
    Join Date
    Apr 2011
    Location
    Pembroke Pines, Fl
    Posts
    4
    Quote Originally Posted by Mystery Brew View Post
    Usually when I push the chore I push it after a while and definatly after a good session. I got some of the best hits from it. Definatly saves you a good minute of fiending

    If you run the flame across the stem a few times to liquify the caked up crack in the stem than push the chore, it works like a charm

    The Chore always ends up squishing together to much and getting burnt down after a while. If your blowing 300$ in rocks youll probably want to change the chore after a bit

    Good luck man, dont get caught up in that shit

    Am I wrong in think that the "caked up crack" is the purest? Because most of the impurities were burned off and only the cocaine re-solidifies
    Your resin is your most prized posession. It is the most potent stuff you can smoke. Your only problem is that you dont want to liquify it. Only heat it up enough to where the whole area around it is clear. Once its clear push the chore with your screwdriver and now all your resin is at the top of the chore.
     

  23. Collapse Details
     
    #23
    Greenlighter
    Join Date
    Apr 2011
    Location
    Pembroke Pines, Fl
    Posts
    4
    Just curious, what is your prefered method for resin hits, im a fan of the simple yet effective push but ive always wondered why somw people prefer scraping to pushed. Please explain your answer.
     

  24. Collapse Details
     
    #24
    Quote Originally Posted by nicotineking18 View Post
    Just curious, what is your prefered method for resin hits, im a fan of the simple yet effective push but ive always wondered why somw people prefer scraping to pushed. Please explain your answer.
    Here's how I do it....It's the best thing to me but it requires good stuff.

    So...first I take a test hit..to see if the stuff is good enough(If not..put it in a spoon and put a little water in..then heat up the bottom till it gets sticky and comes together in the middle of the water.Take a knife or nickel and pull it to the front of the spoon. You can actually see the cut at the bottom of the spoon...that will tell you how good it is.).

    What I like to do is get 2 or 3 hits of resin...how i do this is when I'm done with all my stuff...I take my pipe and wrap it in a paper towel...then I put it in the freezer for about 10 minutes. Once you take it out of the freezer...let it sit for a minute or so and push your Chore Boy up to pack it in real nice....here's the fun part..push your chore through the pipe...it may be a little hard but don't heat it up too much.

    That black spot on your pipe should come right out in a whole chunk...now put that on the table or wherever. Take the hit, then pack the resin in for the second hit..and maybe even a 3rd with a rock.

    That is my way of doing it....what do you all think?
     

  25. Collapse Details
     
    #25
    Bluelight Crew Sepher's Avatar
    Join Date
    Aug 2010
    Location
    Oop North, furtlin' me ferrets.
    Posts
    2,454
    XXL's method using a solvent is a good one. Acetone works just as well, typically bought as nail varnish remover, though check it's not got lanolin in it as smoking lanolin's greasy residue is NOT pleasant! It's better with a glass pipe as acetone can dissolve some plastics, but it won't be in contact for more than a few seconds so not a major issue. Pour a small amount into the pipe, probably less than a teaspoon full, swill it around and pour out through the mouthpiece onto a plate or a large mirror, let the acetone evaporate, then scrape up what's left with a razor blade. You can speed up the evaporation with a hair dryer on a low speed setting without blowing the stuff stuck to the mirror away but it evaporates pretty quickly anyway. The residue will look pretty dark and dirty usually and won't taste so good but smokes fine. If you've been smoking hard putting plenty of rocks through the pipe in between washes you'll even get a few hits out of it, and they'll be stronger than the rocks were cos you've got rid of most of the impurities..
     

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •