Bluelight

Thread: How to inject opana er

Page 1 of 9 12345 ... LastLast
Results 1 to 25 of 204
  1. Collapse Details
    How to inject opana er 
    #1
    Greenlighter
    Join Date
    Mar 2009
    Location
    Panama Shitty, fl
    Posts
    3
    Needle
    I've recently been reading about how much difficulty people have had preparing opana er for injecting. It's not difficult, and you don't need to do anything crazy. It's actually pretty simple if you think about it. Oxymorphone originally came in 1mg ampules for injection. Opana er comes in 20mg and 40mg. The oral bioavailability is only 10%, and snorting doesn't really change it that much. You only need a few mgs if you're iv-ing, and thats the key. Here's What I do:

    Take about 1/10 - 1/16 (a tiny tiny piece) of a 40 and crush it
    Using a 100 unit syringe, add about 170 units, and stir
    Heat to a ROLLING boil
    (Get yourself a refillable butane "windproof" torch lighter for heating, they work best)
    add cotton, and draw it up

    It's not the strongest rush, and depending on your tolerance you may need to do a few of these injections in order to get where you want to be, but it's WAY better than snorting. I've been doing this for about two weeks now with no problems (except a huge tolerance now). It sucks that you can't get a huge rush (and probably need 2-3 injections) but you're getting much more out of the pill than doing it any other way. I figure that if you can get your hands on a 3cc or 4cc syringe, you can ajust the recipe accordingly and get a better shot. Thats my next goal. Good luck!
    Reply With Quote
     

  2. Collapse Details
     
    #2
    NEVER heat a pill.
    Reply With Quote
     

  3. Collapse Details
     
    #3
    Bluelighter Oxyrisin2's Avatar
    Join Date
    Jan 2009
    Location
    Washington State
    Posts
    224
    Capsule
    Quote Originally Posted by Lost and Confused View Post
    NEVER heat a pill.
    No kidding..What is it with everyone wanting to heat there pills lately. They come in waves.LOL
    Reply With Quote
     

  4. Collapse Details
     
    #4
    Bluelighter
    Join Date
    May 2008
    Location
    Pinecrest
    Posts
    1,711
    Ill direct rath to this thread, im pretty sure hes done this before
    Reply With Quote
     

  5. Collapse Details
     
    #5
    Bluelighter rath's Avatar
    Join Date
    Jul 2008
    Location
    South Carolina
    Posts
    3,027
    It's better to use IR pills they don't gel as much. And never heat your pills they'll gel up right away . Crush them and stir the pills in 30ml of cold water for 5-10 minutes and they'll desolve enough for you to start filtering them and please use a micron or wheel filter if you can get them. Cotton fever is never worth it.
    Reply With Quote
     

  6. Collapse Details
     
    #6
    Bluelighter BaybeX's Avatar
    Join Date
    Sep 2008
    Location
    South Central Florida
    Posts
    2,584
    Quote Originally Posted by Dopey T View Post

    It's not the strongest rush, and depending on your tolerance you may need to do a few of these injections in order to get where you want to be, but it's WAY better than snorting. I've been doing this for about two weeks now with no problems (except a huge tolerance now). It sucks that you can't get a huge rush (and probably need 2-3 injections) but you're getting much more out of the pill than doing it any other way. I figure that if you can get your hands on a 3cc or 4cc syringe, you can ajust the recipe accordingly and get a better shot. Thats my next goal. Good luck!
    If you keep on with this method, I'm afraid you will have more problems than just a high tolerance in a few months.
    Reply With Quote
     

  7. Collapse Details
     
    #7
    Bluelighter
    Join Date
    Sep 2007
    Location
    in ur facebook, writing the messages
    Posts
    345
    ^ like what?
    Reply With Quote
     

  8. Collapse Details
     
    #8
    Bluelighter
    Join Date
    May 2008
    Location
    Pinecrest
    Posts
    1,711
    Like abcesses, that come with missed shots. skin problems, overdose.

    injecting pills is nasty.
    Reply With Quote
     

  9. Collapse Details
     
    #9
    Bluelighter BaybeX's Avatar
    Join Date
    Sep 2008
    Location
    South Central Florida
    Posts
    2,584
    The tablets contain the following inactive ingredients: hypromellose, iron oxide black, methylparaben, propylene glycol, silicified microcrystalline cellulose, sodium stearyl fumarate, TIMERx® -N, titanium dioxide, and triacetin. The 5 mg, 10 mg and 20 mg tablets also contain macrogol, and polysorbate 80. In addition, the 5 mg tablets contain iron oxide red. The 10 mg tablets contain FD&C yellow No. 6. The 20 mg tablets contain FD&C blue No. 1, FD&C yellow No. 6, and D&C yellow No. 10. The 40 mg tablets contain FD&C yellow No. 6, D&C yellow No. 10, and lactose monohydrate.

    source: http://www.rxlist.com/opana-er-drug.htm

    I'm pretty sure if you keep shooting these additives into your veins.. you are in for some trouble. In the short run your problems may include: abcesses, scarring, collapsed/damaged veins, not to mention damage to lungs and such.

    You may want to google some of those ingredients.. I searched iron oxides and came up with this: iron oxides are used as contrast agent in Magnetic Resonance Imaging.

    Doesn't sound like something I'd feel comfortable putting in my veins
    Reply With Quote
     

  10. Collapse Details
     
    #10
    Quote Originally Posted by BaybeX View Post
    I searched iron oxides and came up with this: iron oxides are used as contrast agent in Magnetic Resonance Imaging.

    Doesn't sound like something I'd feel comfortable putting in my veins
    ROFL, I can't believe you just said that... How do you think it's used for MRIs? They inject it into your veins. Hahaha, thanks, I needed that... You always provide the funny.

    It's a bad idea to inject pills, just not so much for that reason.
    Reply With Quote
     

  11. Collapse Details
     
    #11
    Lightbulb
    Quote Originally Posted by Ayrios View Post
    ROFL, I can't believe you just said that... How do you think it's used for MRIs? They inject it into your veins. Hahaha, thanks, I needed that... You always provide the funny.

    It's a bad idea to inject pills, just not so much for that reason.



    HA I registered to this site just so I could LOL at that post. Apparently someone knows not of how magnetic resonance works,. From all the research I've done, it appears there is no real SAFE way to IV Opana ER, and to be honest I really dont think any Extended release pill can be injected safely. Sure you may do it a few times, but its not very healthy and should be not done lightly. One should think hard about this, as there are far worse things in this world then OD'ing. Throwing meterials in your veins that shouldnt be there is incredibly dangerous. Especially pills with silica in it, dye's and shit arent as dangerous as some other things in these pills. Personally I dont think Rx companies put these things in these pills to try and harm people who IV them. Some of the new Time Release mechanisms are incredibly advanced. Especially TimeRx with its burst mechanisms and decreasing and steady release mechanisms. I've about to acquire a bunch of the 20mg ER's we'll see what I can discover bout them. Personally I pride myself on learning the nature of things and being as efficient as possible with things.
    Reply With Quote
     

  12. Collapse Details
     
    #12
    Don't heat that fucking stupid not only will it gel more it gets more nasty shit into the final solution.
    Reply With Quote
     

  13. Collapse Details
     
    #13
    Bluelight Crew Desdenova's Avatar
    Join Date
    Sep 2008
    Location
    NWO Headquarters
    Posts
    1,332
    Seriously, by heating it your absorbing more binders and fillers than would normally get it, and by heating it to a boil you could be destroying oxymorphone (which at this point should be the least of your worries)

    If it gels when you add water, that means you should stop unless you're doing some special procedure.

    Now that the point has been sufficiently driven, this should probably be close so you don't spread extremely harmful information. I'll let a mod decide

    Reported
    Reply With Quote
     

  14. Collapse Details
     
    #14
    BL Ambassador Captain.Heroin's Avatar
    Join Date
    Nov 2008
    Location
    I wished with all my heart that we could just...leave this world behind. Rise like two angels in the night and magically...disappear.
    Posts
    48,462
    Quote Originally Posted by Desdenova View Post
    Seriously, by heating it your absorbing more binders and fillers than would normally get it, and by heating it to a boil you could be destroying oxymorphone (which at this point should be the least of your worries)

    If it gels when you add water, that means you should stop unless you're doing some special procedure.

    Now that the point has been sufficiently driven, this should probably be close so you don't spread extremely harmful information. I'll let a mod decide

    Reported
    I wouldn't want someone to shoot an oxymorphone ER pill by cold shaking it because they didn't get to post in this thread. Better keep it open.
    Reply With Quote
     

  15. Collapse Details
     
    #15
    Bluelight Crew Desdenova's Avatar
    Join Date
    Sep 2008
    Location
    NWO Headquarters
    Posts
    1,332
    Ah, good call. That's why you're the mod!
    Reply With Quote
     

  16. Collapse Details
     
    #16
    from YEARS of expierience with OpanaER:
    they fucked up my nose so bad so quickly, im still addicted but trying to just take it orally, which is going good so far, but it hasnt been long
    I cant imagine what it would have done to my body if I still IV'd (thank you god for helping me break that addiction)

    stop while your ahead man, you might not feel anything right now but there are some bad bad bad things happening to your body RIGHT NOW

    -TheMatador
    Reply With Quote
     

  17. Collapse Details
     
    #17
    BL Ambassador Captain.Heroin's Avatar
    Join Date
    Nov 2008
    Location
    I wished with all my heart that we could just...leave this world behind. Rise like two angels in the night and magically...disappear.
    Posts
    48,462
    silicified microcrystalline cellulose
    This is what you'll want a micron filter for.
    Reply With Quote
     

  18. Collapse Details
     
    #18
    I get 60 10mg Er's a month.
    For the life of me I can't figure it out.
    I never ran it because the shit looks so bad when gelled up.
    So I stopped trying.
    Reply With Quote
     

  19. Collapse Details
     
    #19
    Bluelighter morphonorconic's Avatar
    Join Date
    Sep 2008
    Location
    Mississippi
    Posts
    1,454
    You're actually advising people to do this? People like you will lose limbs this way, or worse.
    Reply With Quote
     

  20. Collapse Details
     
    #20
    BL Ambassador Captain.Heroin's Avatar
    Join Date
    Nov 2008
    Location
    I wished with all my heart that we could just...leave this world behind. Rise like two angels in the night and magically...disappear.
    Posts
    48,462
    Quote Originally Posted by morphonorconic View Post
    You're actually advising people to do this? People like you will lose limbs this way, or worse.
    Well, people have lost digits from shooting Ambien, or Demerol...but people will still do that despite efforts on our behalves to warn them of the inherent dangers of injecting pill binder without a micron filler.

    To come out and just say that doesn't go far enough - to say "you can lose a limb" people are going to ask "why?".

    You bring up a good point, though I would expand on it - post a link to the Case Studies thread, links to pictures, quotes of text. For example, of course - so people can see what happened when "something went wrong" for someone else. Often people think "it'll never happen to me" but if you refer them to the thread filled of pictures full of people who it did happen to - people will make sure they learn everything about injecting drugs before jumping into it haphazardly.

    Harm reduction's intention isn't to stop users from injecting whatever drug they desire - it's to inform them of the risks/dangers associated with using, so that they are most capable to make informed, wise decisions for their lives.
    Reply With Quote
     

  21. Collapse Details
     
    #21
    Bluelighter nowdubnvr6's Avatar
    Join Date
    Dec 2008
    Location
    Monfuckingtana
    Posts
    6,314
    Where can i buy micron filters online i cant seem to find em?
    Reply With Quote
     

  22. Collapse Details
     
    #22
    ^^^^^^^^
    go to http://www.google.com and type in "micron filters"
    Bingo!
    Reply With Quote
     

  23. Collapse Details
     
    #23
    Bluelighter
    Join Date
    Sep 2008
    Location
    NYC
    Posts
    60
    So for IMing (i.e. into my muscle), what happens if:

    1. the coating on an Opana ER is removed,
    2. the pill is crushed,
    3. crushed pill is then poured into a cup with clean water.
    4. the syringe sucks up everything from the cup through a cotton ball (if you can't find a micron filter).
    5. inject into a muscle or vein (but what muscle would y'all suggest if you don't want a vein?)


    If this method is an awful one, please explain filtering better for those of us who have never injected anything.

    Thank you
    Last edited by smacks24; 19-09-2009 at 00:44.
    Reply With Quote
     

  24. Collapse Details
     
    #24
    BL Ambassador Captain.Heroin's Avatar
    Join Date
    Nov 2008
    Location
    I wished with all my heart that we could just...leave this world behind. Rise like two angels in the night and magically...disappear.
    Posts
    48,462
    Quote Originally Posted by nowdubnvr6 View Post
    Where can i buy micron filters online i cant seem to find em?
    TheMatador: google is a nice link, but google doesn't sell them.

    We are allowed to source for needles, micron filters, etc.

    Ask TheDankaholic, or check out http://www.gpzservices.com/

    http://www.gpzservices.com/items/pro...ation/list.htm

    to be exact


    Quote Originally Posted by smacks24 View Post
    So for IMing (i.e. into my muscle), what happens if:

    1. the coating on an Opana ER is removed,
    2. the pill is crushed,
    3. crushed pill is then poured into a cup with clean water.
    4. the syringe sucks up everything from the cup through a cotton ball (if you can't find a micron filter).
    5. inject into a muscle or vein (but what muscle would y'all suggest if you don't want a vein?)


    If this method is an awful one, please explain filtering better for those of us who have never injected anything.

    Thank you
    Do not shoot into your muscle! Especially pill material. You are many fold more likely to have injection complications from IMing pill material or street drugs VS safe material (sterile ampule meant for si,im,iv), or a pure drug.
    Last edited by Captain.Heroin; 19-09-2009 at 05:58.
    Reply With Quote
     

  25. Collapse Details
     
    #25
    Bluelight
    Quote Originally Posted by smacks24 View Post
    So for IMing (i.e. into my muscle), what happens if:

    1. the coating on an Opana ER is removed,
    2. the pill is crushed,
    3. crushed pill is then poured into a cup with clean water.
    4. the syringe sucks up everything from the cup through a cotton ball (if you can't find a micron filter).
    5. inject into a muscle or vein (but what muscle would y'all suggest if you don't want a vein?)


    If this method is an awful one...

    This is AWFUL, a better method would be throwing away your gear and try plugging, shooting OpanaER at all,
    much less into a muscle is a horrid idea, not to mention just straight up reckless.


    -TheMatador
    Reply With Quote
     

Page 1 of 9 12345 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •