• Select Your Topic Then Scroll Down
    Alcohol Bupe Benzos
    Cocaine Heroin Opioids
    RCs Stimulants Misc
    Harm Reduction All Topics Gabapentinoids
    Tired of your habit? Struggling to cope?
    Want to regain control or get sober?
    Visit our Recovery Support Forums

Cocaine Le Junk's Cocaine Purification Megathread v. The Final Word

Pictures of falling snow, I wanna see...

It would be nice to see some pics of the final product. I am curious on how the consistency of the precipitated cocaine salt looks. Does it get chunky or is more of a fine crystal powder. I wonder if you did a big enough batch if you could pull a snowball size chunk of crystally cocaine Hcl, yum.

I'd be curious if you used the ammonia/ether route to form the base if it would further increase the potency or return of your yield.

I'd love to see a work-up of the washing of salt-> base-> salt complete with pictures. Satisfying drug porn :D
 
villian said:
The end product is definatley good quality...I've *never* gotten sexual feelings off coke...and I've always had some sort of a comedown...

The comedown off the washed shit I did was very mild however....it's definatley worth your time to do this...I mean it takes all of 20 minutes of effort..

When you say very mild, was it still enough to need a few beers or the like after?
 
I am in the process of moving and will not have any internet at my new house until Dec. 1. And that really sucks!

In the meantime, I will access this site as often as I possibly can.

I always try and answer every question posed to me and I will continue to do so. Please be patient if I have yet to answer yours. I eventually will.

I must also add one very important detail. Alot of what's sold as cocaine today is simply amphetamines mixed with lidocaine or procaine. The product may actually contain NO cocaine at all. If you do this process and you get no diamond like crystal growth at the end, your product most likely contains no cocaine at all. Since the lidocaine and/or procaine will travel through this entire process, you may still get a very mild high with no speedy feelings and absolutely NO euphoria. The end product will lack the pearlescense of real cocaine and will contain no diamond like crystals.

If this happens, throw it away immediately! Your product contains no cocaine.

This is rare, but not as much as you think. I just wanted to make you aware of the possibility.
 
LoveMONEY said:
Hi im new, first off thank you for the research Le Junk. I've followed your posts for a long time, they're always very informative and helpful.

I have a couple questions to you or anyone else that may be able to answer them about your method.

- If freebase is formed in water, how does the "Amphetamine freebase and ephedrine freebase" not wash away when you cook it the first time?

- Lets say someone wanted to purify freebase, following your method, are you saying you can just break up a piece of freebase into shake, dump it into water, stir it around and the end product will be 100% pure freebase ???(which can be re-cooked into a solid rock without much loss?)

Basically, i've been hearing that a lot of people are cooking up their product and coming back with strange forms of freebase, which sometimes do not dry properly, taste bad, or have other strange qualities. This is most likely attributed to other chemicals in the "cocaine" when it is first cooked up, correct?

Just out of curiosity, what would cause freebase not to dry (stays soft and gooey) after the water is completely cooled? I ask this question because for the most part once the water is cooled freebase usually hardens up or is this not always the case?

Thanks a lot every1,

lovemoney

Well im not real knowledgable on the subject, but ill put my 2 cents in. Cocaine will absorb moisture, so if it is 100% or damn close to it - it will absorb alot of moisture. Maybe this explains your problem, but maybe not - it was just a thought.
 
Due to popular demand I am going to sticky this for the time being so everyone has an opportunity to read it.

:)
 
thx for reply SPDemon420

Well maybe pure cocaine absorbs alot of moisture, but im talking about freebase. Are you saying pure freebase might absorb moisture?
 
I doff my hat to you, Le Junk. Thank you for such a well written and fairly straightforward procedure. I can't wait to give this a go and try cocaine as it's meant to be enjoyed.

Cheers! :)
 
- If freebase is formed in water, how does the "Amphetamine freebase and ephedrine freebase" not wash away when you cook it the first time?

- Lets say someone wanted to purify freebase, following your method, are you saying you can just break up a piece of freebase into shake, dump it into water, stir it around and the end product will be 100% pure freebase ???(which can be re-cooked into a solid rock without much loss?)


LoveMoney makes a great point here that I would love to have answered. I'm going to assume that maybe some of the amphetamine freebase gets trapped inside the blob of coke freebase, hence the drying and chopping back into a fine powder before the water wash. So if this is the case, how fine of a powder are we lookin for here? Could the coke possibly become cleaner the finer we chop?

Someone else asked the question about using the "elite" freebase method of amonia and ethyl ether. Does this make a better end product?? I'm going to assume both methods yield the same since LeJunk would have nothing but the best.
 
LoveMONEY said:
thx for reply SPDemon420

Well maybe pure cocaine absorbs alot of moisture, but im talking about freebase. Are you saying pure freebase might absorb moisture?

This I wouldnt know, I dont know a massive amount about cocaine. I just know it has an affinity to water.
 
CauseIcan said:
- If freebase is formed in water, how does the "Amphetamine freebase and ephedrine freebase" not wash away when you cook it the first time?

- Lets say someone wanted to purify freebase, following your method, are you saying you can just break up a piece of freebase into shake, dump it into water, stir it around and the end product will be 100% pure freebase ???(which can be re-cooked into a solid rock without much loss?)


LoveMoney makes a great point here that I would love to have answered. I'm going to assume that maybe some of the amphetamine freebase gets trapped inside the blob of coke freebase, hence the drying and chopping back into a fine powder before the water wash. So if this is the case, how fine of a powder are we lookin for here? Could the coke possibly become cleaner the finer we chop?

Someone else asked the question about using the "elite" freebase method of amonia and ethyl ether. Does this make a better end product?? I'm going to assume both methods yield the same since LeJunk would have nothing but the best.

Exactly correct. The amphetamine freebase and the ephedrine freebase both get trapped in one big clump of all the freebases. Also the amount of water needed to completely dissolve the two would exceed the normal amount in a spoon during a regular bi-carb cooking method.

Your freebase MUST be completely dry and as finely chopped as possible. This will aid in the dissolving of both of the unwanted freebases.

And using the ammonia/ether route of obtaining freebase will only increase your yeild and better purify your end result.
 
my hat goes off to you, sir.

i shall spend my heard earned dollars on some overly-priced-australian-cocaine and perform this piss-easy-purification.



ah, now i know what to ask santa for christmas... :)
 
I just did the last procedure with the muratic acid and no crystals were formed. NONE! It's just a liquid milky color now. It's been over 5 minutes now. What the hell is going on?!?! :p
 
jchen said:
I just did the last procedure with the muratic acid and no crystals were formed. NONE! It's just a liquid milky color now. It's been over 5 minutes now. What the hell is going on?!?! :p

Was the acetone/freebase liquid nearly clear if not totally clear before the acid was added?

Was the freebase TOTALLY dry before you dissolved it in acetone?

Exactly how much freebase did you start with?

How much acetone did you dissolve it in?

Exactly how many drops of acid did you add?

What do you mean milky in color? If it's milky in color, there has to be something forming inside since it was just plain clear liquid before adding the acid.

:\
 
Was the acetone/freebase liquid nearly clear if not totally clear before the acid was added?

It was cloudy, then we added the 8 drops

Was the freebase TOTALLY dry before you dissolved it in acetone?

I believe so. We chopped it and let it dry for at least 5+ minutes.

Exactly how much freebase did you start with?

Never weighed it.

How much acetone did you dissolve it in?

In a shot glass, I filled it up 3/4's of the way.

Exactly how many drops of acid did you add?

8 drops.

What do you mean milky in color? If it's milky in color, there has to be something forming inside since it was just plain clear liquid before adding the acid.

after adding the acid, it just formed to almost smoke in water, with nothing but a cloudy substance remaining, but no solids were left in the glass.
 
jchen said:
Was the acetone/freebase liquid nearly clear if not totally clear before the acid was added?

It was cloudy, then we added the 8 drops

Was the freebase TOTALLY dry before you dissolved it in acetone?

I believe so. We chopped it and let it dry for at least 5+ minutes.

Exactly how much freebase did you start with?

Never weighed it.

How much acetone did you dissolve it in?

In a shot glass, I filled it up 3/4's of the way.

Exactly how many drops of acid did you add?

8 drops.

What do you mean milky in color? If it's milky in color, there has to be something forming inside since it was just plain clear liquid before adding the acid.

after adding the acid, it just formed to almost smoke in water, with nothing but a cloudy substance remaining, but no solids were left in the glass.

I'll PM you from here.
 
Le Junk let me first ay that I have been lurking these forums for years and have just now registered an account. I used your first purification with acetone but have done nothing else it was spectacular to remove the inactive cuts but knowing there is better got me more interested. We are having problems, I did not know whether to PM you, post here, or try to email you, so if you prefer something else tell me. Again blue light rocks and so do your threads, enough brown-nosing, let me get to my question.

We could not get past the first step. I bough 3.9 grams of what we think is pretty good coke, granted I have done coke about once or twice every two weeks or so for the past year and a half to two. We took out enough so that it weighed 3.0. I decided that since I was using an electric stove that I would use this 2 cup measuring metal pan type thing to cook with [basically a small metal pan with staright sides] since it would balance better on the stove. It was a lot bigger than the spoon you suggested, about 4 inches wide, 2.5 deep, it is round. I think I used too much water would that effect the coke to baking soda ratio?

We used everything from medium heat to almost high and could not get anything but a VERY small bit of what we thought was freebase to form. Granted I have never seen freebase, just lots of powder. I read that the freebase should look yellow/ gold and be oily, we saw a very small dot or two that appeared to be like this, nothing that came close to the 3 grams we put in. Anyways we kept it on the stove till almost all the water evaporated and still not much freebase, the water is very gold in color and looks like it has some oil in it, but nothing too readily visible.

Any ideas? One other thing that may make a difference is that instead of a glass stirring rod I used a butter knife, I know its metal and the freebase sticks too it and I beleive there is a little residue on there because it has some white stuff stuck to the end as well as being sticky to the touch. The small metal measuring cup we used also has residue all up the inside and it seems some got onto the stove around the cup. Not nearly enough to be the 3.0 we put in. I guess what i am asking is where did all my coke go? All I have is this small amount of oily water.

I hope I did not lose my money. If there is no way to save this purification, is there a way I can get my coke back? At least some of it?
There is nothing else I can really think that we did wrong except a little too much water and the metal knife for stirring. Should the water bubble and almost boil? Sorry i am rambling on but i am remebering a lot of stuff. For the first few minutes we put the water on the stove it was cloudy then when we took it off before we knew what we looking for it started to turn clearish. I forgot to mention I tried it over again after it cooled, adding more water and baking soda to the same effect. I really hope i didnt just lose 3.0 grams of coke, I am already a poor college student to start with....... guess I should be doing coke in the first place, but alas, any ideas? I have it sitting at room tempurature with a lid on it.
 
Top