30 second drug checking tutorial GIF:
https://imgur.com/jGQJtWo
Full Instructions
IMPORTANT: Never have more than one reagent bottle open at a time. If you mix up the caps and put the wrong cap on the wrong reagent bottle, this may cross-contaminate the reagents and ruin them. Be sure to perform the tests in a well-lit location. Be careful when using the reagents, as they contain chemicals that can damage skin (we recommend wearing latex gloves). Keep the solutions far from your eyes and mouth. Also, make sure to clean up completely after each test.
? Scrape a tiny bit of your pill or powder onto a large, white ceramic plate. Use just enough powder to see on the plate.
? Take the reagent bottle out of the plastic safety container. Remove the cap and turn the bottle upside-down a couple inches over the powder. ? Squeeze one drop out of the bottle onto the powder. Be careful to not let the dropper bottle touch your powder or you will contaminate and ruin the rest of the reagent. Replace the cap.
? Observe the color change right away. Optionally you can film the reaction with your phone or a camera for future reference. Use the corresponding columns of the color chart included with your kit to evaluate your test.
? If the reagent either does not change any color during the first 30 seconds or if it produces some other color-change sequence, then the pill definitely does not contain any of the above substances. It may also be highly adulterated with one or more unknown substances. You can use other reagents on new samples to look for the presence of other substances. Wash the testing surfaces with soap and water as soon as possible.
A Note On Using Folin Reagent
After you?ve established the fact that your pill does contain an ecstasy-like substance, use Folin Reagent to find out whether the substance is MDA or MDMA or MDE.
The steps are similar to what you did using our other reagents; however, this reaction requires two bottles of liquid (bottle ?A? and ?B?). You will once again scrape off a tiny bit of your pill onto a clean white plate, carefully add a drop of liquid from bottle ?A? (closing the cap tightly afterwards) and then to that tiny powder/liquid mixture, a drop of liquid from bottle ?B? (again, making sure the bottles are securely closed to prevent cross-contamination). You will then observe the color change over a period of one minute.
Storage and Handling Instructions
Reagents are primarily sulfuric acid with other potentially dangerous chemicals, and are strong enough to burn skin and clothing. Keep out of eyes and mouth. Wear latex gloves when handling the bottle and cap. If you get some on you, then wash quickly with soap and water. Wash testing surfaces with soap and water as well. Dispose of any unwanted reagent down the sink with running water and baking soda. Store all testing kits in a cold, dark place such as a refrigerator between uses.
NOTE: Reagents can only determine the presence, not the quantity or purity, of a particular substance. Dark color reactions will tend to override reactions to other substances also in the pill. A positive or negative reaction for a substance does not indicate that a drug is safe. No drug use is 100% safe. Make good decisions.
Useful links
Sources
1)
https://dancesafe.org/testing-kit-instructions/