Sprout
Bluelight Crew
- Joined
- Oct 13, 2009
- Messages
- 7,377
Amphetamine Purification via Acetone
You will need:
A deep, solid container like a porcelain bowl or a glass jar.
A second container to transfer solutions between.
Acetone – as pure as possible.
Some pipettes or a syringe.
Appropriate filters.
The shitty “7g wanker” Amphetamine Sulphate that you want to clean up a little.
Add the Phet to the bottom of your container, doesn’t make much difference if it’s chopped up or not.
For each gram of Amphet you have, add ~10ml of Acetone and stir vigorously until the gelatinous blob has separated leaving no clumps. You will be left with a milky solution that should then be left to settle for fifteen minutes or so.
Amphetamine Sulphate is poorly soluble in Acetone and so the liquid layer can be extracted by simply drawing up through your filter into the pipette/syringe.
Discard the fluid into the second container and continue filtering the cloudy solvent until you are left with just moist gunk. The solvent layer now contains a large proportion of the cuts that were present due to simple dissolution.
As the Amphetamine gunk is drying out it is best to collect it all together as closely as possible.
If you used decent quality Acetone then the residual should evaporate pretty much before your eyes. An air current from a nearby fan will help speed up the process, just don’t act out some stimulant slapstick and send your speed scattering around the room…
Once it is mostly solidified you can scrape up and place on top of a heated plate until you are left with a bone dry powder that can be chopped up and consumed infinitely easier than the stinky shite you started with.
This will not provide you with pure Amphetamine Sulphate.
Rather you will have, or should have, removed the cutting agents of a high solubility in Acetone. Thankfully Acetone could dissolve your soul if it tried and so reliably removes a good chunk of the excipient matter.
You will need:
A deep, solid container like a porcelain bowl or a glass jar.
A second container to transfer solutions between.
Acetone – as pure as possible.
Some pipettes or a syringe.
Appropriate filters.
The shitty “7g wanker” Amphetamine Sulphate that you want to clean up a little.
Add the Phet to the bottom of your container, doesn’t make much difference if it’s chopped up or not.
For each gram of Amphet you have, add ~10ml of Acetone and stir vigorously until the gelatinous blob has separated leaving no clumps. You will be left with a milky solution that should then be left to settle for fifteen minutes or so.
Amphetamine Sulphate is poorly soluble in Acetone and so the liquid layer can be extracted by simply drawing up through your filter into the pipette/syringe.
Discard the fluid into the second container and continue filtering the cloudy solvent until you are left with just moist gunk. The solvent layer now contains a large proportion of the cuts that were present due to simple dissolution.
As the Amphetamine gunk is drying out it is best to collect it all together as closely as possible.
If you used decent quality Acetone then the residual should evaporate pretty much before your eyes. An air current from a nearby fan will help speed up the process, just don’t act out some stimulant slapstick and send your speed scattering around the room…
Once it is mostly solidified you can scrape up and place on top of a heated plate until you are left with a bone dry powder that can be chopped up and consumed infinitely easier than the stinky shite you started with.
This will not provide you with pure Amphetamine Sulphate.
Rather you will have, or should have, removed the cutting agents of a high solubility in Acetone. Thankfully Acetone could dissolve your soul if it tried and so reliably removes a good chunk of the excipient matter.
